DLA A-A-55135-1992 LIGHT CHEMILUMINESCENT 6 IN - 5 IN - C《6 IN - 5 IN - C化学发光灯》.pdf

《DLA A-A-55135-1992 LIGHT CHEMILUMINESCENT 6 IN - 5 IN - C《6 IN - 5 IN - C化学发光灯》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55135-1992 LIGHT CHEMILUMINESCENT 6 IN - 5 IN - C《6 IN - 5 IN - C化学发光灯》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-55L35 = 9999974 OL20BL3 b89 I -INCB-POUND 1 A-A-55 13 5 December 10, 1992 COMMERCIAL ITEM DESCRIPTION LIGHT, CHEMILUMINESCENT, 6 IN - 5 MIN - C The General Services Administration has authorized the use of this commercial item description. Abstract . This description covers a 5 minute 6 inch che

2、miluminescent light (commonly known as a light wand) used for a variety of lighting, marking, and identification purposes. Salient characteristics. 1. Color. The color of the chemiluminescent light described in this CID is orange. the Part Identification Number (PIN) paragraph of this CID. The color

3、 wand required shall be identified in Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Commander, Space and Naval Warfare Command, ATTN: SPAWAR 003-114/031, Washington, DC 20363. FSC 6260 DISTRIBUTION ST

4、ATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 5 13 5 2. Desisn. The chemiluminescent light shall be elongated having an overall length of 6 inches plus 0.043 minus 0.375 inche

5、s. The mid point diameter shall be no less than .500 inches and the wand shall have a flat base on one end. The diameter of the flat end shall not exceed -750 inches. The end opposite the flat base shall have a hole -188 inches nominal. Lightsticks shall have a tapered shape and shall be compatible

6、with the following accessory items; Lightstick Shield (NSN 6260-01-196-0637), Ground Stake (NSN 6260-01-230-8555), Flare, Surface Trip (NSN 6260-01-247-2937), Handle, six (6) inch (NSN 6260-01-255-3345), and Magnetic Base (NSN 6260-01-255-3346). Lightsticks shall be individually wrapped in an airtig

7、ht foil wrapper. 3. Interior. This chemiluminescent light specified in this Commercial Item Description shall produce a level of light intensity as specified in Table I for a specified length of time (5 minutes). 4. Material Safety Data Sheet. Manufacturer shall provide evidence in the form of a Mat

8、erial Safety Data Sheet (MSDS) (Fed-Std-313) that the components shall not be highly toxic, toxic, corrosive or irritant in terms of the definitions and tests in Code of Federal Regulations, Title 16, Part 1500 (Federal Hazardous Substances Act). exceed the data presented in Table I. After Ageing Te

9、st, luminance (foot lambert-hours) must meet or exceed data in Table II. Activated by manually flexing the plastic tube, breaking the inner vial and shaking to combine components. Plastic tube shall not leak and vial will not break when subjected to an external pressure equivalent to 30,000 feet at

10、75 degrees F in a vacuum chamber. Must withstand a free fall, while still in wrapper, from a height of 8.5 feet on a hard surface (concrete) without activating or leakage. 5. Test criteria. Luminance (foot lambert-hours) must meet or 6. Test conditions. a. Meter: Traceable to NIST. b. Aging Test - t

11、o be added at a future revision date. c. Temperature stabilization: Wands, while still in sealed foil wrappers, will be placed in test temperature for a minimum of one (1) hour before activation. d. Remove wand from sealed foil wrapper immediately before activation. Light wand shall be handled by ca

12、p end during testing. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55135 m 9999974 0120815 451 m A-A-55 13 5 e. Activation method: Bend; agitate for five (5) seconds. f. Wands kept under cover or in darkness; may be exposed to a light during

13、 movement to and from light meter. g. All meter readings made in darkness. h. Meter kept at 75 degrees F for all tests. i. Temperature tolerances: plus or minus 2 F. j. Holder, wand test fixture in accordance with DGSC drawing, - k. Chemiluminescent lights shall be held in a vertical position- DGSCV

14、-91-03, Part Number 3. (Enclosure 1) with cap end down when light output measurement is made. 1. Ageing Test - test conditions to be added at a future date. Contractor certification. The contractor shall certify, and maintain objective quality evidence that the product offered to the Government meet

15、s the salient characteristics of this description and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices and is the same produced as the manufacturers current product offered by the contractor in the commercial marketplace for at least

16、 one year preceding the solicitation. require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract . The Government reserves the right to Metric products. Products manufactured to metric dimensions will be considered o

17、n an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this Commercial Item Description are met . If a product is manufactured

18、to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. accepting or rejecting the product. The contracting officer has the option of 3 Provided by IHSNot for Res

19、aleNo reproduction or networking permitted without license from IHS-,-,-A-A-55135 9997974 OL2081b 398 A-A-5 5 1 3 5 a aa a kO . E o) 4 m n III W W ps L3 x ob4c k4 mo) c O -ri In -ri o 2 al k 7 N +I t, n Wn h Wb III w 4 7 ti Q 4 Q a c kkm OE o o4 k o, a a 4 alo) al al4 a4 caa -ri 7 k z 4 E: H u 3 n z

20、 O u o) a O 4 Q 4 m al FI n W m FIG O0 a -4 M O H a m h H III W H e. W H O 2 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55135 m 9999974 OL20817 224 A-A-55135 Io W I- O z 5 Enclosure 1 Provided by IHSNot for ResaleNo reproduction or network

21、ing permitted without license from IHS-,-,-A-A-55135 9999979 0120811 80b I A-A-55 135 Reaulatorv reuuirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. Qualitv assurance. Foil leakaae. Samples will be test

22、ed for foil leakage by application of 6 psi air pressure into the inside of the foil wrap while submerged under water. from any portion of the foil, except where the foil has been penetrated by the air supply shall be classified as an airtight foil failure . A steady stream of air bubbles coming She

23、lf life. Each chemiluminescent light shall have a minimum of 22.months life remaining at the time of delivery to the Government and must have been manufactured within 6 months of the date of delivery to the Government. Fluid Level. The vertical fluid level, when measured from the exterior of the fla

24、t base shall be no less than 3 1/4 inches. Preservation, packaqinq, P ackinq, labelinq, and markinq. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. Foil wrapping and all other packaging shall be marked with manufacturers lot number and exp

25、iration date. Foil wrapping shall be color coded and contain operating instructions. CID based Part Identification Number. The following Part Identification Numbering procedure is for Government purposes and does not constitute a requirement for the contractor. A-A-55135-X 1 COLOR C=ORANGE CID NUMBE

26、R 6 I I l l 1 I l 1 I l Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55135 W 9999974 0120812 742 W A-A-5 5 1 35 Notes . Orderinq data. a. Title, number, part identification number with applicable Acquisition documents must specify the followin

27、g: color code letter, and date of this document. b. Material Safety Data Sheet (MSDS) shall be provided to Contracting Officer prior to award (FAR 52.223-3 and MSDS, Page 2). c. Contracting Officer may request proof of certification of commercial item prior to first contract delivery (See Contractor

28、 Certification, Page 3). MILITARY INTEREST: CIVIL AGENCY COORDINATING ACTIVITY: MILITARY COORDINATING ACTIVITY: Custodians Navy-EC Air Force-99 Reviewinq Activities 0 DL-GS - User Activities Navy-YD GSA-FSS PREPARING ACTIVITY: Navy-EC AGENT: DLA-GS PROJECT NO. 6260-1010 FSC 6260 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-