DLA A-A-55112 A-1995 BAG FLYER-S HELMET《飞行员头盔专用袋》.pdf

《DLA A-A-55112 A-1995 BAG FLYER-S HELMET《飞行员头盔专用袋》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55112 A-1995 BAG FLYER-S HELMET《飞行员头盔专用袋》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-55112A m 9999974 0167689 692 I c + b A A-A-55112A June 19, 1995 SUPERSEDING December 23, 1992 A-A-55 11 2 COMMERCIAL ITEM DESCRIPTION BAG, FLYERS HELMET The General Services Administration has authorized the use of this commercial item description. 1. SCOPE. This commercial item description cove

2、rs one type of flyers helmet carrying bag. The bag is intended for use by aviation personnel of the Department of Defense and is designed to hold the flyers helmet and auxiliary equipment. 2. SALIENT CHARJACTERISTICS * 2.1 Description. The Flyers Helmet bag shall have a finished measurement of 20 x

3、19-1/4 inches and consist of an outer panel with a liner. The bag shall have two (10-1/4 x 6-3/4 inches) inner pockets, one at each end of the liner, and two (14 x 9-1/2 inches) outer pockets on the front of the bag. The bag shall have matching grip handles on the front and back, with a slide fasten

4、er for closing the bag, and nylon tape fastener and snap fasteners for closing the outer pockets (see Figure 1). 2.2 Cloth, nylon. The plain weave, nylon cloth for the outer and inner panel, outer pockets, protector flap, grip handle reinforcements, and grip handle panels shall be a durable water- r

5、epellent-treated cloth: sq./%yd.; breaking strength shall be warp (275 lbs. min.) and filling (225 lbs. min.); air permeability shall be 2.0 ft./min./ft. The color shall be shade Camouflage Green CG-483, and show good to better fastness to laundering, weathering and crocking. The weight shall be 3.8

6、 to 4.8 oz. Beneficial comments, recommendations, additions, deletions, cl distribution is unlimited. Licensed by Information Handling Services A-A-55112A 9999974 0167690 304 - A-A-55112A 2.3 Fisures. Figures 1 and 2 are furnished for information purposes only. commercial item description and the fi

7、gure;. the written commercial item description shall govern. r grip handles requires a 3-point double “W“ pattern stitched 1 to 1-1/8 inchlong and 3/4 to 7/8 inch wide. To stitch the webbing to the bag use a 1 to 1-1/8 by 3/4 to 7/8 inch “box-X“ pattern stitched through the front side of the bag. Ba

8、rtacks when applicable shall be 3/4 (minimum) inch wide by 1/8 (minimum) inch long and shall contain a minimum 42 inches. All other stitching can be either lockstitch or chainstitch as designated. When inconsistencies exist between the written 2.4 Stitches fixed loop eye; fiat-spring closure with re

9、tainer; with a zinc coating, followed by an enamel finish. provided that an additional printed cloth label containing the contractors name, contract number, size and National Stock Number (NSN) is caught on the stitching of %he comercial label. The commercial labe1,shall include fiber and laundering

10、 information. * 2.11 Snap hook, 1-inch. The snap hook shall be a 1-inch, 2.12 Labels. A commercial-type label is acceptable, . 2.13 Label/taq. Each item shall be individually bar-coded with a paper tag for personal clothing items. shall be standard bleached sulfate having a basis weight of 100 pound

11、s. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall have a hole and shall be attached to each item by a fastener, clearly legible a readable by a scanner. element shall be 6 13 digit national stock number (NSN). code type shall be

12、a medium ta high cods density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. 2.14 Patterns. The Government shall furnish a single size pattern. The contractor is responsible for grading pat

13、terns for additional sizes. Government-furnished pattern provided they confohn to the cited design and finished measurements. 3. REGIJLATORP REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Fed

14、eral Acquisition Regulation (FAR). The paper tag The bar coding The bar Commercial patterns may be used in lieu of the 4. QUALITY ASSURANCE PROVISIONS 4.1 Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets thewalient characteristics of thi

15、s commercial item description; conforms to the producers own drawings, specifications, standards, and quality assurance practices; and is the same product offered for sale in the commercial marketplace. Government reserves the right to require proof of such conformance prior to the first delivery an

16、d thereafter as may be otherwise provided for under the provisions of the contract. The 3 Licensed by Information Handling ServicesA-A-5 5 11 2A 4.2 Market acceptabilitv criteria. The item offered, or a generic equivalent, must have been sold to the commercial market or to the Government for at leas

17、t two years. Warranty. given to the commercial market beginning with the date of delivery of the individual items. 4.3 Visual examination. The item offered shall include the standard warranty The bag shall be examined for the defects listed below. Defects. Any hole, cut or tear; color not as specifi

18、ed; any spot or stain (outside); thread ends not removed; label dssing, incorrect, or illegible; measurement of item not as specified; exposed drill holes on nylon cloth; nylon webbing not firmly and tightly woven, or edges frayed or scalloped; general hardware (snap fasteners, slide fasteners and s

19、nap hooks) not functioning properly, (i.e., fails to provide a secure closure or to open freely, or not of a specified type or size.); webbing ends not fused; open seams more than 1/2 inch; wrong seam or stitch type; three or more stitches per inch less than minimum specified; any seam excessively ,

20、pleated or puckered; any stitching row omitted, except on double 2W“ stitch pattern; two or more rows omitted on double “W“ stitch-pattern; bartack stitching loose, incomplete or broken or bartack omitted; one or more box stitches missing, loose or not size specified; Sag liner not stitched to bag a

21、t bottom; any component part omitted or not attach as specified; any component caught in any unrelated operation of stitching; ID tag omitted, incorrect, illegible or not as specified; bar code omitted or not readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar code not

22、 visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or order. 5. PACKAGING 5.1 Preservation, packinq, and markinq. The preservation, packing, and marking shall be as specified in the contract or order. 6. NOTES 6.1 Source of G

23、overnment documents. Copies of military and Federal documents are available from: :c Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 4 Licensed by Information Handling ServicesA-A-55112A 6.2 Source of non-Government documents ASTM Test Methods (Applicatio

24、ns for copies should be addressed to American Society For Testing and Materials, 1916 RaceStreet, Philadelphia, PA 19103-1187.) AATCC Test Method (Applications for copies should be addressed to American Association of Textile Chemists and Colorists- CAXTCCr, P.O. Box 12215, Triangle Park, NC 27709-2

25、215.) speckf ied in the contract or purchase order. 6.3 Acceptance criteria. Acceptance criteria shall be as Custodian: Army - GL Air Force - 99 Review Activity: Army - MD Air Force - 32, 45, 82 . Civil Agency Coordinating Activity : GSA - FSS Preparing Activity: DLA - CT Project No. 8415-0944 . 5 L

26、icensed by Information Handling Services- FRONT I BACK (Shown without liner stitched to outer panel at bottom) FIGURE 1. BAG, FLYERS HELMET 6 Licensed by Information Handling ServicesB A = TWO WARP ENDS WOVEN AS ONE B = TWO FILLING PICKS PER SHED - FIGURE 2. RIPSTOP WEAVE PATTERN - .- 7 Licensed by Information Handling Services