DLA A-A-50067 A-1995 CLOTH FLANNEL WOOL《羊毛绒布》.pdf

《DLA A-A-50067 A-1995 CLOTH FLANNEL WOOL《羊毛绒布》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-50067 A-1995 CLOTH FLANNEL WOOL《羊毛绒布》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-50067A Februarv 27, 1995 SUPERSEDING A-A-50 O 67 June 3, 1987 COMMERCIAL ITEM DESCRIPTION CLOTH, FLANNEL, WOOL The General Services Administration has authorized the use of this commercial item description. Abstract. This document covers one type of cloth used as a facing for the underside of th

2、e collar of uniform coats and overcoats. 0 Salient characteristics Desian and construction, The cloth shall be manufactured from wool, The cloth may have up to 20 percent nylon. otherwise specified, a certificate shall be submitted and will be acceptable for the stated requirement. The color of the

3、cloth shall be as specified in the contract or purchase order. cloth shall be a plain weave and shall be evenly sheared and mothproofed with an approved treatment. minimum width of 60 inches. Unless The The cloth shall have a The cloth shall weigh 10.5 minimum Beneficial comments (recommendations, a

4、dditions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FQSD, 2800 South 20th Street, Philadelphia, PA 19101-8419. P AMSC N/A FSC 8305 DISTRIBUTION STATEMENT A.

5、Approved for public release; distribution is unlimited. *1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50067A m 9999974 0166406 961 m A-A-50067A ounces per square yard when tested according to ASTM D3776-85 option C. The cloth shall have a mi

6、nimum of 26 ends and 23 picks per inch when tested according to ASTM D-3775-85. The samples for test ASTM D-3775-85 shall be conditioned as directed in “ASTM D1776 Practice for Conditioning Textiles for Testing“ prior to testing. pounds in the warp direction and 19 pounds in the filling direction wh

7、en tested according to ASTM D1682-64 Section 16. The cloth shall have a minimum breaking strength of 24 Lenath and put-up. The cloth shall be furnished in rolls of continuous length andeach length shall be not less than 40 yards. Label/taq. Each roll shall be individually bar-coded with the type VI1

8、 or VIII, Class 17 label/tag of DDD-L-20 - Label: For Clothing, Equipage, And Tentage (General Use). This label/tag shall be located so that it is completely visible on each roll and causes no damage to the roll. Workmanshb. The finished cloth shall conform to the quality of product established by t

9、his document. The occurrence of defects shall not exceed the contractorOs own quality assurance standards and the quality assurance standards defined by the technical data in the bid package. Reaulatow reauirements. The offeror/contractor is encouraged to use recovered materials in accordance with P

10、ublic Law 94-580 to the maximum extent practicable. Each roll shall weigh not more than 250 pounds. gualitv assurance Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producerOs own specifi

11、cations, standards and quality assurance practices, and is the same product offered for sale in the commercial marketplace. Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contr

12、act. Visual examination. Each rall shall be examined for the defects listed below. The Defects. Any hole, cut, or tear; color not as specified; any part shaded; any spot or stain ; raw edges; any material defects, or poor workmanship; width of cloth not as specified; label missing, incorrect, or ill

13、egible; bar code omitted or not readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar code causes damage to the roll; any items not packaged in accordance with contract or purchase order. Preservation. Dackina. and markinq. The preservation, packing, and marking shall be

14、 as specified in the contract or order. 9 2 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-50067A m 9999974 OLbb407 8T8 m A-A-50067A Arjrjroval of mothrjroofina treatment. and combinations and formulas is the responsibility of the U.S. Army N

15、atick Research, Development and Engineering Center, Natick, MA 01760-5014. Only those treatments approved and so listed in the invitation for bids or request for proposals shall be considered acceptable for the related procurement. Approval of such components Source of Government documents. document

16、s are available from: Copies of military and Federal Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Source of non-Government documents ASTM Test Method2 (Applications for copies should be addressed to: American Society For Testing and Materials (ASTM), 1

17、916 Race Street, Philadelphia, PA 19103-1187.) Custodian: Army - GL Navy - N Review Activity: Civil Agency Coordinating Activity : GSA - FSS Preparing Activity: DIA - CT Army - MD Navy - MC Project No.8305-0512 3 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-