DLA A-A-20033 C-2001 TEA BLACK (BAGS OR LOOSE)《红茶(袋装或散装)》.pdf
《DLA A-A-20033 C-2001 TEA BLACK (BAGS OR LOOSE)《红茶(袋装或散装)》.pdf》由会员分享,可在线阅读,更多相关《DLA A-A-20033 C-2001 TEA BLACK (BAGS OR LOOSE)《红茶(袋装或散装)》.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、ETRICJ A-A-20033C August 1,2001 SUPERSEDING September 27,1995 A-A-20033B COMMERCIAL ITEM DESCRIPTION TEA, BLACK (BAGS OR LOOSE) The U.S. Department of Agriculture (USDA) has authorized the use of this Commercial Item Description. 1. SCOPE. This Commercial Item Description (CID) covers black tea (bag
2、s or loose), packed in commercially acceptable containers, suitable for use by Federal, State, local governments, and other interested parties; and as a component of operational rations. 2. PURCHASER NOTES. 2.1 Purchasers shall specify the following: - Type(s) of black tea required (Sec. 3). - When
3、a bid sample is not required (5.2.4). - When analytical requirements are different than specified (Sec. 6.1). - When analytical requirements need to be verified (Sec. 6.2). - Manufacturers/distributors certification (Sec. 9.2) or USDA certification (Sec. 9.3). 2.2 Purchasers may specilfjr the follow
4、ing: - Manufacturers quality assurance (Sec. 9.1 with 9.1.1) or (Sec. 9.1 with 9.1.2). - Packaging requirements other than commercial (Sec. .lo). . 3. CLASSIFICATION. The black tea shall conform to the following types as specified in the solicitation, contract, or purchase order. Tvpes. Type1 - Bags
5、 Type11 - Loose AMSC NIA FSC 8955 Licensed by Information Handling ServicesA-A-20033C 4. MANUFACTURERS/DISTRIBUTORS NOTES. Manufacturerddistributors products shaZZ meet the requirements of the: - Salient characteristics (Sec. 5). - Analytical requirements: as speciJied by the purchaser (Sec. 6). - M
6、anufacturers/distributors product assurance (Sec. 7). - Regulatory requirements (Sec. 8). - Quality assurance provisions: as specified by the purchaser (Sec. 9). - Packaging requirements other than commercial: as specified by the purchaser (Sec. 10). 5. SALIENT CHARACTERISTICS. 5.1 Dry leaf tea. 5.1
7、.1 Processing. The black tea shall be prepared in accordance with good manufacturing practices (21 CFR Part 110). 5.1.2 Leaf color. The black tea shall be fully fermented, dry, uniform in color, clean, and sound. 5.1.3 Leaf size. The leaf size for bag tea and loose black tea shall be pekoe (relative
8、ly small leaves), orange pekoe, broken pekoe, broken orange pekoe, broken tea, or a blend of these, but fannings or dust shall be excluded. 5.1.4 Appearance. The black tea shall have a good appearance (including twist). 5.1.5 Aroma. The aroma from dry tea shall be sweet, fresh, and free from obnoxio
9、us or foreign odors. 5.1.6 Defects. The dry tea shall be practically free from sticks, stems, and stalks. 5.1.7 Foreim material. The finished product shall be clean, sound, wholesome, and free from evidence of rodent or insect infestation. 5.2 Prepared tea. 5.2.1 Infused leaf color and odor. The inf
10、used leaf shall be bright, uniform in color, and possess a sweet, fresh odor. 5.2.2 Prepared tea color. The prepared tea beverage shall have a color typical of that produced by black tea. 2 Licensed by Information Handling ServicesA-A-20033C 5.2.3 Flavor. Black tea from recognized tea producing coun
11、tries, either singularly or blended, shall produce a tea of pleasing flavor. There shall be no foreign flavors such as, but not limited to; smokey, musty, sour, stale, or other objectionable flavors. 5.2.4 Bid sample. Unless otherwise specified in the solicitation, contract, or purchase order, a bid
12、 sample shall be submitted and evaluated for conformance to 5.2.2 and 5.2.3. 6. ANALYTICAL REQUIREMENTS. 6.1 Analvtical requirements. Unless otherwise specified in the solicitation, contract, or purchase order, the analytical requirements for the black tea shall be as follows: 6.1.1 Extraneous mater
13、ial. Extraneous material of the black tea shall not exceed 1 .O percent by weight. 6.2 Product verification. When USDA verification of analytical requirements is specified in the solicitation, contract, or purchase order, the following procedures will be followed: 6.2.1 Sampling procedures. USDA ins
14、pection service will select the number of product containers based on USDA inspection service sampling procedures and plans. 6.2.2 Composite sample. Analytical testing shall be performed on a composite sample. The composite sample shall be 454 grams (1 pound) and prepared from subsamples drawn from
15、randomly selected containers. The number of subsamples used to create the composite shall be based on USDA procedures. 6.3 Analytical testing. When specified in the solicitation, contract, or purchase order, the analyses shall be made in accordance with the following method from the Official Methods
16、 of Analysis of the AOAC International: Test Method - Heavy filth in tea 975.48 6.4 Test result. The test result shall be reported to the nearest O. 1 percent. Any result not conforming to the analytical requirement shall be cause for rejection of the lot. 7. MANUFACTURERS/DISTRIBUTORS PRODUCT ASSUR
17、ANCE. The manufacturer/ distributor shall certify that the black tea provided shall meet the salient characteristics of this CID, conform to their own specifications, standards, and quality assurance practices, and be the same black tea offered for sale in the commercial market. The purchaser reserv
18、es the right to require proof of conformance. 3 Licensed by Information Handling ServicesA-A-20033C 8. REGULATORY REQUIREMENTS. The delivered black tea shall comply with all applicable Federal, State, and local mandatory requirements and regulations relating to the preparation, packaging, labeling,
19、storage, distribution, and sale of black tea within the commercial marketplace. Delivered black tea shall comply with all applicable provisions of the Federal Food, Drug, and Cosmetic Act and regulations promulgated thereunder. 9. QUALITY ASSURANCE PROVISIONS. Purchaser shall specifi 9.2 or 9.3; pur
20、chaser may specif) 9. I with 9.1.1 or 9.1 with 9.1.2. 9.1 Manufacturers quality assurance. When required in the solicitation, contract, or purchase order, the product manufacturer shall be required to provide evidence, by certificate, that the manufacturing plant has undertaken one of the following
21、quality assurance measures within 12 months prior to providing a bid, or no later than 10 business days from the date of awarding of the contract. Failure to provide this documentation within the proper time frame may result in the contract being terminated for cause. 9.1.1 Plant systems audit. A pl
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAAA20033C2001TEABLACKBAGSORLOOSE 红茶 袋装 散装 PDF

链接地址:http://www.mydoc123.com/p-686007.html