DIN EN 1337-4-2004 Structural bearings - Part 4 Roller bearings German version EN 1337-4 2004《结构轴承 第4部分 滚柱轴承》.pdf

《DIN EN 1337-4-2004 Structural bearings - Part 4 Roller bearings German version EN 1337-4 2004《结构轴承 第4部分 滚柱轴承》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1337-4-2004 Structural bearings - Part 4 Roller bearings German version EN 1337-4 2004《结构轴承 第4部分 滚柱轴承》.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 91.010.30Structural bearingsPart 4: Roller bearingsEnglish version of DIN EN 1337-4Lager im Bauwesen Teil 4: RollenlagerEuropean Standard EN 1337-4 : 2004 has the status of a DIN Standard.A comma is used as the decimal marker.Start of validityThis standard is valid from 1 July 2005 (start of coe

2、xistence period). It should be noted that, in Germany, CEconformity marking of construction products will be permitted once this standard has been listed in theGerman Federal Law Gazette (1 July 2005 or later)1).National forewordThis standard has been prepared by CEN/TC 167 Structural bearings (Secr

3、etariat: Italy).The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building andCivil Engineering Standards Committee), Technical Committee 00.91.00 Lager im Bauwesen.DEUTSCHE NORM August 2004DIN EN 1337-4 No part of this standard may be reproduced without the p

4、rior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 14www.din.dewww.beuth.de9587850Continued overleaf.Document comprises 30 pages.11.04G4G15G64G84G56G51) See r

5、elevant EC Official Gazette for end of coexistence period.English versionICS 91.010.30Structural bearingsPart 4: Roller bearings 2004. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 1337-4 : 2004 ELager im Bauwesen Teil 4: Rollen-la

6、gerThis European Standard was approved by CEN on 2004-02-02.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical reference

7、s concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own

8、 language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

9、, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN 1337-4April 2004Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungAppareil

10、s dappui structuraux Partie 4: Appuis rouleauPage 2EN 1337-4 : 2004PagePage 3EN 1337-4 : 2004151616161718181818181919191919192020202222262729Page 4EN 1337-4 : 2004Page 5EN 1337-4 : 2004Page 6EN 1337-4 : 2004Page 7EN 1337-4 : 2004Page 8EN 1337-4 : 2004Page 9EN 1337-4 : 2004Page 10EN 1337-4 : 2004Page

11、 11EN 1337-4 : 2004Page 12EN 1337-4 : 2004Page 13EN 1337-4 : 2004Page 14EN 1337-4 : 2004Page 15EN 1337-4 : 2004Page 16EN 1337-4 : 2004Page 17EN 1337-4 : 2004Page 18EN 1337-4 : 2004Page 19EN 1337-4 : 2004Page 20EN 1337-4 : 2004Page 21EN 1337-4 : 2004Page 22EN 1337-4 : 2004Page 23EN 1337-4 : 2004Page 24EN 1337-4 : 2004Page 25EN 1337-4 : 2004Page 26EN 1337-4 : 2004Page 27EN 1337-4 : 2004Page 28EN 1337-4 : 2004