CSA O153-2013 Poplar Plywood (Fourth Edition).pdf

《CSA O153-2013 Poplar Plywood (Fourth Edition).pdf》由会员分享，可在线阅读，更多相关《CSA O153-2013 Poplar Plywood (Fourth Edition).pdf（41页珍藏版）》请在麦多课文档分享上搜索。

1、O153-13Poplar plywoodLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and intere

2、sts to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided wi

3、thout any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual prope

4、rty rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS

5、VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS

6、 INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBI

7、LITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The

8、 information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a priva

9、te not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of

10、this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in t

11、his document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may g

12、ive rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of

13、the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Aut

14、horized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; se

15、arch and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may

16、not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Lega

17、l Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceO153-13Ja

18、nuary 2013Title: Poplar plywoodTo register for e-mail notification about any updates to this publicationa) go to shop.csa.cab) click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422160.If you require assistance, please e-mail techsupportcsagroup

19、.org or call 4167472233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personal information.ISBN 978-1-77139-113-9 2013 CSA GroupAll rights reserved. No part of this publication may be reproduced to any form whatsoever without the prior permission of the publ

20、isher.Published in January 2013 by CSA Group A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade

21、-mar k of the Canadian S tandards Association, operating as “CSA Group”Poplar plywoodO153-13O153-13Poplar plywoodJanuary 2013 2013 CSA Group1ContentsTechnical Committee on Wood-Based Panels 3Preface 51 Scope 62 Reference publications 63 Definitions 74 Quality system 105 Materials 115.1 Veneers 115.1

22、.1 Species 115.1.2 Permitted characteristics 115.1.3 Jointing 115.2 Adhesives 115.3 Patching materials 116 Construction and bonding 116.1 Standard construction 116.1.1 Ply thickness 116.1.2 Layup 126.1.3 Joints 126.2 Modified construction 126.2.1 Ply thickness 126.2.2 Layup 126.2.3 Joints 126.3 Bond

23、ing 136.3.1 General 136.3.2 Shear test 136.3.3 Heat durability test 136.3.4 Overlay bond test 136.3.5 Joint tests 137 Specific grades of plywood 147.1 General 147.2 Sanded grades 147.2.1 General 147.2.2 A-A 147.2.3 A-B 147.2.4 A-BB 147.2.5 A-Industrial 147.2.6 A-Utility 147.2.7 A-C 147.2.8 B-B 14O15

24、3-13Poplar plywoodJanuary 2013 2013 CSA Group27.2.9 B-BB 147.2.10 B-Industrial 157.2.11 B-Utility 157.2.12 B-C 157.2.13 BB-BB 157.2.14 BB-Industrial 157.2.15 BB-Utility 157.2.16 BB-C 157.2.17 Industrial two sides 157.2.18 Industrial-utility 157.2.19 Industrial one side 157.2.20 Utility two sides 167

25、.2.21 Utility one side 167.3 Sheathing grades 167.3.1 General 167.3.2 Select sheathing 167.3.3 Standard sheathing 167.4 Overlaid grades 167.4.1 General 167.4.2 High density overlaid (HDO) 167.4.3 Medium density overlaid (MDO) two sides 167.4.4 Medium density overlaid (MDO) one side 167.5 Specialty p

26、anels 177.6 Shop Panels 178 Dimensions and tolerances 178.1 General 178.2 Width and length 178.3 Panel thickness 178.4 Ply thickness 178.5 Squareness 188.6 Straightness 189 Identification and marking 189.1 Required marking 189.2 Optional marking 199.3 Marking location 199.4 Degrade panels 19Annex A

27、(normative) Veneer and panel characteristics and defects 22Annex B (normative) Test procedures 26Annex C (normative) High density overlay and medium density overlay plywood 32Annex D (informative) Common industry practices 34O153-13Poplar plywoodJanuary 2013 2013 CSA Group3Technical Committee on Woo

28、d-Based PanelsN. Nagy CertiWood Technical Centre, North Vancouver, British ColumbiaRepresenting ManufacturersChairD. Anderson A.F.A Forest Products Inc, Surrey, British ColumbiaJ. Andrews Richmond Plywood Corporation Limited, Richmond, British ColumbiaRepresenting ManufacturersK. Blau Tolko Industri

29、es Ltd, Vernon, British ColumbiaRepresenting ManufacturersS. Bradic Alberta Plywood A division of West Fraser Mills Ltd, Edmonton, AlbertaRepresenting ManufacturersR. Desjardins FPInnovations, Qubec, QubecAssociateB. Di Lenardo Canadian Construction Materials Centre, Ottawa, OntarioM. Feng FPInnovat

30、ions, Vancouver, British ColumbiaRepresenting General InterestsF. Hill BCIT-School of Construction and the Environment, Burnaby, British ColumbiaRepresenting General InterestsC. Howes Yolles, A CH2M HILL Company, Toronto, OntarioRepresenting General InterestsP. Jaehrlich CertiWood Technical Centre,

31、North Vancouver, British ColumbiaAssociateO153-13Poplar plywoodJanuary 2013 2013 CSA Group4A. Kempthorne Delta, British ColumbiaK. Lau Ainsworth Engineered Canada LP, Vancouver, British ColumbiaRepresenting ManufacturersA. LeBlanc ALC Incorporated, Toronto, OntarioD. Lefebvre PolyDM, Qubec, QubecRep

32、resenting General InterestsD. Moses Moses Structural Engineers Inc, Toronto, OntarioF. Saillant Canadian Forest Service/Natural Resources Canada, Ottawa, OntarioRepresenting General InterestsK. Stochlia ICC Evaluation Service, LLC, Whittier, California, USAAssociateS. Zylkowski APA - The Engineered

33、Wood Association, Tacoma, West Virginia, USAAssociateD. Torrey CSA Group, Mississauga, OntarioProject ManagerO153-13Poplar plywoodJanuary 2013 2013 CSA Group5PrefaceThis is the fourth edition of CSA O153, Poplar plywood. It supersedes the previous editions published in 1980, 1976, and 1963.Changes i

34、n the fourth edition include the following:a) format changes for consistency with other recent CSA plywood standards;b) increased detail for panel and veneer grade requirements;c) increased emphasis and clarity on performance requirements for utilized adhesives, including removal of Interior Bond;d)

35、 requirement for in-plant production and quality control procedures, including auditing by a recognized third-party agency;e) increased detail for some test procedures;f) updated requirements for marking; andg) revisions to informative annex related to shipment re-inspection.This Standard was prepar

36、ed by the Technical Committee on Wood-Based Panels, under the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee.Notes:1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although t

37、he intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.3) This Standard was developed by consensus, which is defined by CSA Policy governing

38、 standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreeme

39、nt with all clauses of this Standard.4) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.org and include “Request for interpretation” in the subject line:a) define the problem, making reference to the specific clause, and, where appr

40、opriate, include an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the

41、 CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal fo

42、r change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.O153-13Poplar plywoodJanua

43、ry 2013 2013 CSA Group6O153-13Poplar plywood1 Scope1.1 This Standard applies to exterior bond, all-veneer plywood with a minimum of three plies and parallel grain direction of the face and back plies.1.2 This Standard specifies requirements fora) a quality system;b) materials;c) panel construction;d

44、) bonding;e) veneer and panel grades;f) dimensions and tolerances;g) marking; andh) testing.1.3 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that

45、 which is advised but not required; “may” is used to express an option or that which is permissible within the limits of the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note acc

46、ompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Re

47、ference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.CSA GroupO86-09 Engineering design in woodO11210Evaluation of adhesives for structural wood products (exterior

48、 exposure)O153-13Poplar plywoodJanuary 2013 2013 CSA Group 7FPInnovationsSP-18R (1986) Evaluation procedures for synthetic patching materials for repairs to plywood panelsISO/IEC (International Organization for Standardization/International Electrotechnical Commission)ISO/IEC Guide 65:1996 General r

49、equirements for bodies operating product certification systemsISO/IEC 17065Conformity assessment - Requirements for bodies certifying products, processes and servicesNIST (National Institute of Standards and Technology)PS 1-09 Structural Plywood3 DefinitionsThe following definitions apply in this Standard:Back the lower-quality side of a panel in a grade of plywood whose outer plies are of different veneer grades.Bark pocket an opening between growth rings that contains bark.Blister/delamination an area of separation between plies due to lack