CSA C22 2 NO 272-2014 Wind turbine electrical systems (First Edition).pdf

《CSA C22 2 NO 272-2014 Wind turbine electrical systems (First Edition).pdf》由会员分享，可在线阅读，更多相关《CSA C22 2 NO 272-2014 Wind turbine electrical systems (First Edition).pdf（67页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 272-14Wind turbine electrical systemsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing var

2、ied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis

3、document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third part

4、ys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SH

5、ALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST

6、REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED O

7、F THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or

8、 entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group

9、is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the

10、users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contain

11、ed in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and

12、may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some

13、of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Au

14、thorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; se

15、arch and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may n

16、ot and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal

17、 Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceC22.2 No. 27

18、2-14August 2014Title: Wind turbine electrical systemsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423068.If you require assistance, please e-mail t

19、echsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personalinformation.ISBN 978-1-77139-581-6 2014 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior per

20、mission of the publisher.Published in August 2014 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747

21、-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Wind turbine electrical systemsC22.2 No. 272-14C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group1ContentsTechnical Committee on Wind Turbines 5Subcommittee on Wind Turbines Electrical Qualif

22、ication 9Preface 111 Scope 122 Reference publications 133 Definitions 184 General requirements 194.1 General 194.2 Components 194.2.1 General 194.2.2 Wiring 204.2.3 Busways 204.2.4 Cabletrays 204.2.5 Wireways and auxiliary gutters 204.2.6 Cablebus 204.2.7 Switchgear and controlgear 214.2.8 Switchboa

23、rds 214.2.9 Panel boards 214.2.10 Control panels 214.2.11 Transformers 214.2.12 Converter/inverter 214.2.13 Slip ring 214.2.14 Lighting 224.2.15 Gearbox 234.2.16 Hoists and winches 234.2.17 Fire protection 234.2.18 Heating and cooling equipment 234.2.19 Electro-hydraulic components 234.2.20 Motors a

24、nd generators 244.2.21 Batteries 244.2.22 Capacitors 244.2.23 Uninterruptible power supplies 244.2.24 Disconnecting means 244.3 Safety related control systems 254.3.1 Control and protection system 254.3.2 Control function 254.3.3 Protection function 254.3.4 Equivalency 264.4 Hub 265 Grid or external

25、 supply disconnection devices and conductor terminations 27C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group25.1 Supply conductor terminations 275.2 Small wind turbine disconnecting means 275.3 Large wind turbine disconnecting means 275.4 Supply disconnecting devices 285.4.1

26、General 285.4.2 Type 285.4.3 Requirements 286 Protection against electric shock 296.1 General 296.2 Basic protection (protection against direct contact) 296.2.1 General 296.2.2 Protection by enclosures 296.3 Fault protection (protection against indirect contact) 297 Protection of equipment 307.1 Gen

27、eral 307.2 Motors 307.3 Overcurrent protection 307.3.1 General 307.3.2 Supplementary protectors 307.3.3 Protective devices 317.3.4 Transformer protection 317.3.5 Internal conductors 327.3.6 Industrial control equipment for use as service equipment 327.3.7 Overcurrent protection 327.4 Overload and ov

28、erheating protection 337.5 Generator overspeed protection 337.6 Protection against overvoltages due to lightning and switching surges 337.7 Protection for motor enclosures and mounting 337.8 Protective devices for brakes 347.9 Grid requirements 347.10 Cable twist 348 Grounding and bonding 349 Operat

29、or interface 359.1 General 359.1.1 General device requirements 359.1.2 Location and mounting 359.1.3 Position sensors 359.1.4 Portable and pendant control stations 359.2 Push-buttons 359.2.1 Colours 359.2.2 Markings 369.3 Indicator lights and displays 369.3.1 General 369.3.2 Colours 369.3.3 Flashing

30、 lights and displays 37C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group39.4 Illuminated push-buttons 379.5 Rotary control devices 379.6 Start devices 379.7 Emergency stop devices 379.8 Enabling control device 3810 Conductors and cables 3810.1 Conductors 3810.2 Wire and cable

31、s without enclosed raceways 3910.3 Cables 3910.4 Cable selection and management 3910.4.1 General 3910.4.2 Interconnections 3910.4.3 Internal wiring 4010.5 Cables rated 2000 V or greater 4110.6 Conductor materials 4110.7 Cable splices and connections 4110.7.1 General 4110.7.2 Conductor splice rating

32、4110.7.3 Tests 4210.7.4 Connection and splice requirements for circuits rated over 1000 volts 4210.8 Ampacity 4210.8.1 General 4210.8.2 Conductor ampacity Method A Calculations 4310.8.3 Conductor ampacity Method A Temperature rise test 4411 Wiring methods 4611.1 Cable management 4611.2 Connections 4

33、611.3 Cable mechanical protection 4711.4 Wiring outside enclosures 4711.4.1 General requirements 4711.4.2 External ducts 4811.4.3 Connection to moving elements of the wind turbine 4812 Working spaces 4913 Accessories 4913.1 Lighting 4913.2 Receptacles 4913.2.1 Ground fault circuit interruption prote

34、ction 4913.3 Energy storage 5013.3.1 Batteries 5013.3.3 Mounting of energy storage devices 5013.4 Electrical qualification of man-lifts 5014 Markings, warning signs, and equipment identification 5014.1 General 5014.2 Nameplate markings 50C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 201

35、4 CSA Group414.3 Warnings/cautions 5114.4 Nameplate materials and construction 5114.5 Identification of equipment 5214.6 Working space 5214.7 Fuse replacement markings 5214.8 Disconnecting means 5214.9 Receptacles for use as disconnecting means 5215 Technical documentation 5315.1 General 5315.2 Info

36、rmation to be provided 5315.3 Installation documents 5315.4 Overview diagrams and function diagrams 5415.5 Circuit diagrams 5415.6 Operating manual 5515.7 Maintenance manual 5515.8 Parts list 55C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group5Technical Committee on Wind Turb

37、inesS.W. Douglas International Association of Electrical Inspectors,Toronto, OntarioCategory: General InterestChairA. Lacroix Natural Resources Canada,Ottawa, OntarioCategory: General InterestVice-ChairP. Andres Sustainable Energy Link Limited,Kincardine, OntarioCategory: User InterestR.L. Arsenault

38、 RAConsultant,Brossard, QubecAssociateT. Buchal Intertek,Cortland, New York, USAAssociateW.A. Chisholm Kinectrics Inc,Toronto, OntarioAssociateC.C. Cormier Alberta Municipal Affairs,Edmonton, AlbertaCategory: Government and/or Regulatory AuthorityM. De Lint Ontario Ministry of Municipal Affairs and

39、Housing,Toronto, OntarioAssociateM. Fischer ENERCON Canada Inc,Montral, QubecAssociateG.S. Frater Canadian Steel Construction Council,Markham, OntarioCategory: General InterestM.S. Gardner Alberta Safety Codes Council,Beaumont, AlbertaCategory: Government and/or Regulatory AuthorityG. Giroux The Win

40、d Energy Institute of Canada (WEICan),Tignish, Prince Edward IslandAssociateC22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group6R.M. Grant Grantec Engineering Consultants Inc,Hammonds Plains, Nova ScotiaCategory: General InterestR. GuillemetteCartier nergie inc,Bromont, QubecCa

41、tegory: Producer InterestN. Hanna Electrical Safety Authority,Mississauga, OntarioCategory: Government and/or Regulatory AuthorityG. Holden Hatch,Niagara Falls, OntarioAssociateB. Howe HGC Engineering (Howe Gastmeier Chapnik Ltd),Mississauga, OntarioCategory: General InterestS.E. Keith Health Canada

42、,Ottawa, OntarioAssociateK. Kroker WSP Canada Inc.,Lethbridge, AlbertaAssociateN. LeForte City of Surrey Planning Development Dept,Surrey, British ColumbiaCategory: Government and/or Regulatory AuthorityT. Levy Canadian Wind Energy Association,Ottawa, OntarioCategory: User InterestR. Lozano Campos G

43、amesa Technology Corp North America,Trevose, Pennsylvania, USACategory: Producer InterestC. Massoncole de technologie suprieure,Montral, QubecAssociateM. Morgenroth Hatch,Niagara Falls, OntarioAssociateR. Morrison CSA Group,Toronto, OntarioAssociateC22.2 No. 272-14Wind turbine electrical systemsAugu

44、st 2014 2014 CSA Group7J. Nelson TransAlta Corporation,Calgary, AlbertaCategory: User InterestsR.J. Nelson Siemens Wind Turbines Americas,Orlando, Florida, USAAssociateJ.P. Pinard JP Pinard Consulting Engineer,Whitehorse,YukonAssociateJ. Pinter BluEarth Renewables Inc,Calgary, AlbertaCategory: User

45、InterestJ. Rostek GE Energy,Greenville, South Carolina, USACategory: Producer InterestS.W. Saylors Vestas American Wind Technology, Inc,Portland, Oregon, USACategory: Producer InterestI. Shaw ENERCON Canada Inc.,Montral, QubecCategory: User InterestT. Simmons British Columbia Institute of Technology

46、,Burnaby, British ColumbiaAssociateD. van Bonn Germanischer Lloyd (GL) Industrial Services,Ottawa, OntarioAssociateD. Vandermeer Orenda Energy Solutions,Iroquois, OntarioCategory: Producer InterestP. Venne Hydro-Qubec-Distribution,Montral, QubecAssociateL. Welsh Environment b) provide an explanation

47、 of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are av

48、ailable on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five years from the date of publication and suggestions for its improvementwill be referred to the appropriate committee. To submit a proposal for change, please send the followinginf

49、ormation to inquiriescsagroup.organd include “Proposal for change” in the subject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 272-14Wind turbine electrical systemsAugust 2014 2014 CSA Group12C22.2 No. 272-14Wind turbine electrical systems1 Scope1.1This Standard applies to complete wind turbine electrical systems and associated electrical equipmentintended for connection at not more than 46 kV and intended for use in accorda