CSA C22 2 NO 128-2016 Vending Machines (Fourth Edition).pdf

《CSA C22 2 NO 128-2016 Vending Machines (Fourth Edition).pdf》由会员分享，可在线阅读，更多相关《CSA C22 2 NO 128-2016 Vending Machines (Fourth Edition).pdf（95页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 128-16Vending machinesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints

2、 and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is

3、provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intelle

4、ctual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA

5、GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENU

6、E, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF

7、THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or

8、entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group

9、 is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and th

10、e users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be con

11、tained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual propert

12、y and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility th

13、at some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own respons

14、ibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of revie

15、wing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition,

16、 users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained i

17、n this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update Servi

18、ceC22.2 No. 128-16January 2016Title: Vending machinesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2424188.If you require assistance, please e-mail t

19、echsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.ISBN 978-1-4883-0225-1 2016 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the pr

20、ior permission of the publisher.Published in January 2016 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747

21、-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Vending machinesC22.2 No. 128-16C22.2 No. 128-16Vending machinesJanuary 2016 2016 CSA Group1ContentsTechnical Committee on Consumer and Commercial Products 4Subcommittee on Safety of Household Electrical Appliances

22、 6Preface 91 Scope 112 Reference publications 113 Definitions 154 General requirements 165 Construction 165.1 General 165.2 Mechanical strength 175.2.1 Enclosures 175.2.2 Cabinet 175.2.3 Enclosure impact test 175.2.4 Glass assemblies 175.3 Protection from fire hazard 185.3.1 Polymeric material 185.3

23、.2 Electrical components 185.3.3 Separation from combustible material 195.4 Protection from shock hazard 195.5 Protection from mechanical hazards 205.6 Outdoor use 215.7 Mechanical assembly 235.8 Stability 245.9 Supply connections 255.9.1 General 255.9.2 Cord-connected vending machines 255.9.3 Perma

24、nently-connected vending machines 265.9.4 Strain relief 275.10 Bushings 275.11 Current-carrying parts 285.12 Internal wiring 285.12.1 General 285.12.2 Types of wiring 295.12.3 Conductor size 305.13 Electrical insulation 305.14 Motors 315.14.1 General 315.14.2 Motor overload and overheating protectio

25、n 315.14.3 Motor overcurrent and thermal protection 325.15 Capacitors 32C22.2 No. 128-16Vending machinesJanuary 2016 2016 CSA Group25.16 Electric lighting equipment 335.16.1 Incandescent and electric discharge lighting equipment 335.16.2 LED lighting equipment 335.16.3 Incandescent lighting circuits

26、 335.16.4 Electric-discharge lighting circuits 335.16.5 Ballasts 345.17 Germicidal (ultraviolet) lamps 355.18 Protection 355.18.1 Water heaters 355.18.2 Heaters 355.19 Special-use connectors 365.20 Switches and controls 365.21 Transformers and power supplies 365.22 Electrically operated valves and s

27、olenoids 375.23 Spacings 375.24 Separation of circuits 395.25 Grounding and bonding 395.26 Safety of refrigerating systems 395.27 Determination of working pressures 405.27.1 Normal 405.27.2 Abnormal 405.27.3 Marking 415.28 Protection against excessive pressure 415.29 Pressure-limiting devices 425.30

28、 Information technology equipment 436 Marking 437 Tests 457.1 General 457.2 Rated conditions 457.3 Rating 467.4 Temperature (normal operation) 477.4.1 General 477.4.2 Temperature (refrigerated units) 477.4.3 Temperature (vending) 487.4.4 Temperature (sold-out) 487.4.5 Temperature (credit mechanisms)

29、 497.5 Temperature (ballasts and wiring) 497.6 Dielectric strength 497.7 Leakage current 497.8 Temperature (abnormal operation) 517.8.1 General 517.8.2 Overload Condition 517.8.3 Condenser fan failure 517.8.4 Condenser water failure 517.8.5 Manual-reset pressure control 517.8.6 Test criteria 517.8.7

30、 Test compliance 51C22.2 No. 128-16Vending machinesJanuary 2016 2016 CSA Group37.8.8 Burnout test other components 527.8.9 Emission of flame or molten material 527.9 Limited short-circuit 527.10 Control equipment 537.10.1 Overload 537.10.2 Endurance 537.11 Starting 547.12 Insulation resistance 547.1

31、3 Rain 547.14 Strain relief 557.15 Accelerated aging tests 557.15.1 Gaskets 557.15.2 Polymeric materials 557.16 Cabinet strength 567.16.1 General 567.16.2 Compliance criteria 567.16.3 Compliance criteria Wall mount equipment 567.16.4 Static load 567.16.5 Deflection 577.17 Impact test 577.17.1 Impact

32、 test Enclosures 577.17.2 Impact test Glass assemblies 577.18 Overflow 587.19 Spill test 587.20 Moisture-absorption resistance 597.21 Printed circuit boards Abnormal 597.22 Printed circuit-board coatings 607.22.1 General 607.22.2 Dielectric strength test on new samples 607.22.3 Dielectric strength t

33、est after aging 607.22.4 Dielectric strength test after humidity conditioning 607.22.5 Adhesion 607.23 Stability 617.24 Flexing 61Annex A (informative) Production pressure tests 73Annex B (informative) Marking translations 74Annex C (informative) Minimum design pressures 75Annex D (informative) Refr

34、igerant flammability parameters 78Annex E (normative) Requirements for a refrigerated vending machine employing a flammable refrigerant in the refrigerating system 79Annex F (informative) Determination of minimum circuit ampacity 90C22.2 No. 128-16Vending machinesJanuary 2016 2016 CSA Group4Technica

35、l Committee on Consumer and Commercial ProductsS. Lawrence Cisco Systems Canada Co., Scarborough, Ontario Category: Producer InterestChairD. Mascarenhas Brampton, Ontario Category: General InterestVice-ChairD.P. Badry Yukon Government, Community Services, Whitehorse, Yukon Category: Regulatory Autho

36、rityG. Benjamin Thomas b) new requirements for permanently-connected vending machines;c) a new requirement for wiring to external accessories;d) a new requirement for electronic protected motors;e) new requirements for water heaters;f) new requirements for transformers and power supplies;g) new requ

37、irements for protection against excessive pressure and pressure limiting devices;h) the addition of accelerated aging test requirements for gaskets and polymeric materials; andi) the addition of and revision to impact test requirements, as well as the addition of a spill test.This Standard is consid

38、ered suitable for use for conformity assessment within the stated scope of the Standard.This Standard was prepared by the Subcommittee on Safety of Household Electrical Appliances, under the jurisdiction of the Technical Committee on Consumer and Commercial Products and the Strategic Steering Commit

39、tee on Requirements for Electrical Safety.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretation of standards under its jurisdiction: “The literal text shall be used in judging compliance of products with th

40、e safety requirements of this Standard. When the literal text cannot be applied to the product, such as for new materials or construction, and when a relevant committee interpretation has not already been published, CSAs procedures for interpretation shall be followed to determine the intended safet

41、y principle.”Notes: 1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its sui

42、tability for their particular purpose.3) This Standard was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is c

43、onsistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this Standard.4) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.org and include “Requ

44、est for interpretation” in the subject line: a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a wa

45、y that a specific “yes” or “no” answer will address the issue. Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.C22.2 No. 128-16Vending machi

46、nesJanuary 2016 2016 CSA Group105) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “P

47、roposal for change” in the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change;d) rationale for the change.C22.2 No. 128-16Vending machinesJanuary 2016 2016 CSA Group11C22.2 No. 128-16Vending machines1 Scope1.1 This Standar

48、d applies to self-contained vending machines designed to be installed and used in commercial applications in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I.1.2 This Standard applies to both refrigerated and non-refrigerated vending machines rated 250 V or

49、 less, single-phase.1.3 This Standard applies to vending machines designed for indoor or outdoor use.1.4 This Standard also applies to self-contained coin, currency, or credit mechanisms, rated at not more than 250 V, single-phase, intended to be factory- or field-installed in vending machines.1.5 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.1.6 In this Standard, “shall” is used to express a requirement, i.e., a provision that