CGSB 49 30-M91-CAN CGSB-1991 Canada Standard Children-s Sizes 2 to 6X Girls- Sizes 7 to 16 and Boys- Sizes 7 to 20 Unlined or Lightweight- Lined Outerwear Coats and Jackets Regular.pdf

《CGSB 49 30-M91-CAN CGSB-1991 Canada Standard Children-s Sizes 2 to 6X Girls- Sizes 7 to 16 and Boys- Sizes 7 to 20 Unlined or Lightweight- Lined Outerwear Coats and Jackets Regular.pdf》由会员分享，可在线阅读，更多相关《CGSB 49 30-M91-CAN CGSB-1991 Canada Standard Children-s Sizes 2 to 6X Girls- Sizes 7 to 16 and Boys- Sizes 7 to 20 Unlined or Lightweight- Lined Outerwear Coats and Jackets Regular.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、CGSB CANICGSB- 49*30-M91 tt m 3874650 0006737 3Tb NATIONAL STANDARD OF CANADA CAN/CGSB-49.30-M91 I Supetsedes CAN/CGSB-49.30-M80, CAIWCGSB49.63-75 and CAN/CGSB49.7 1-75 Canada Standard Childrens Sizes 2 to 6X, Girls Sizes 7 to 16 and Boys Sizes 7 to 20, Unlined or Lightweight- Lined Outerwear Coats

2、and Jackets, Regular Range - Dimensions Canadian General Standards Board Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 49.30-fl92 Xt D 2874650 0006728 232 M The CANAD

3、IAN GENEFWL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through th? media of standards committees a

4、nd the consensus process. “e standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given sta

5、ndard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. CGSB has been acgedited by the Standards Council of Canada as a national standards-wriing organization. The standards that it develops

6、and offers as National Standards of Canada conform to the aiteria and procedures established for this purpose by the Standards Council of Canada in addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of so

7、urces in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the policies described in the Policy Manual for the Development and Maintenane of Standards by CGSB. CGSB standards are subject to review and revision at any t

8、ime, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in IKW editions of standar

9、ds. An up-todate listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB Catalogue, which is published annually and is available without charge upon request. Although the intended primary application of this standard is state

10、d in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Many tests required by CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage

11、that may occur during or as the result of tests, wherever performed. CGSB takes no position respecting the validity of any patent rights asserted with any item connected with this standard. Users of this standard are expressly advised that demination of the validity of any such patent rights are ent

12、irely their own responsibility. Further information on CGSB and its semices and standards may be obtained from: The Secretary Canadian General Standards Board Ottawa, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the Co-ordinahg body of the National Standards System, a federation of independent,

13、 autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, sa

14、fety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international co-operation in the field of standards. A Nationai Standard of Canada is a standard which has been approved by the Standards Council of Canada and one wh

15、ich reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand.

16、It normally is a standard that is capable of making a significant and timely contribution to the national interest Approval of a standard as a National Standard of Canada indicates that a standard conforms to the critena and procedures established by the Standards Council of Canada. Approval does no

17、t refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic rev

18、iew; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. rests with the: 1 /- The responsibility for approving National Standards of Canada I Standards Council of Canada 45 OConnor street suite 1200 Ottawa, ontali0 K1P 6N7 low to order sa Publica

19、tions: by Telephone - (819) 956-0425 or - (819) 956-0426 by Fax - (819) 956-5644 - CGSB, Sales Unit Ottawa, canada K1A 1G6 11 Laurier street Hull, Quebec by Maii in Person - Place du Portage III, 9C1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo r

20、eproduction or networking permitted without license from IHS-,-,-CGSB CANKGSB- 49.30-M1 tt m 1874650 0006719 179 m NATIONAL STANDARD 0F.CANADA CAN/CGSB-49.30-M91 Supersedes CAN/CGSB-49.30-M80, C ANKGSB-49.63 -75 and CAN/CGSB-49.71-75 CANADA STANDARD CHILDRENS SIZES 2 TO 6X, GIRLS SIZES 7 TO 16 AND B

21、OYS SIZES 7 TO 20, UNLINED OR LIGHTWEIGHT-LINED OUTERWEAR COATS AND JACKETS, REGULAR RANGE - DIMl3NSIONS . Prepared by the Canadian General Standards Board ea Approved by the Standards Council of Canada Published December 199 1 by the Canadian General Standards Board Ottawa, Canada K1A 1G6 Clhlinist

22、er of Supply and SeMces Canruin - 1991 No pur of this publication may be reproduced in any form without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from

23、IHS-,-,-CGSE CANICGSB- 49.30-NqL *icm M 1874b50 OOOb720 770 CANADWN GENEFUL STANDARDS BOARD COMMITTEE ON GARMENT SIZES FOR CHILDREN AND INFANTS (Membership ut date of upprovd) Baker, S. Chairperson Boyd, J. Boynton, E. Bryan, FJ. Cdlender, S. Cosman, V. Davis, K. Humphries, M. Leveilie, G. Staples,

24、M.L. Wall, M. Richards, N. Secretary Sears Canada Inc. The Retail Research Laboratories of Cmada Canadian Home Economics Association Apparel Manufacnirers Association of Ontario Hudsons Bay Company Deparmient of Consumer and Corporate Affairs L. Davis Textiles Consumers Association of Canada Giily O

25、riginals Consultant University of Guelph Canadian General Sraudards Board .chnowledgrnent is inde for the French rranslution of rhis Narionai Standard of Canada by the Tmmiation Bureau of the Deportment of the Secretury of Stute. Copyright Canadian General Standards Board Provided by IHS under licen

26、se with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 49-30-fl9L * 3874b50 OOOb723 827 W a CAN/CGSB-4930-M91 Supersedes CAN/CGSB-49.30-M80 CANKGSB49.63-75, and CAl4CGSB-49.7 1-75 CANADIAN GENERAL STANDARDS BOARD CANADA STANDARD CHILDRENS SIZES

27、2 TO 6X, GIRLS SIZES 7 TO 16 OUTERWEAR COATS AND JACKETS, REGULAR AND BOYS SIZES 7 TO 20, UNLINED OR LIGHTWEIGHT-LINED RANGE - DIMENSIONS 1. 1.1 2. 2.1 2.1.1 2.2 3. 3.1 4. 4.1 4.2 5. 5.1 5.2 6. 6.1 SCOPE This standard applies to the dimensions considered essential to provide for the fit of unlined o

28、r lighnveight-lined outerwear coats and jackets, with or without hoods, that are intended for wear by little girls and little boys, (CSS regular range, sizes 2 to 6X), girls (CSS regular range, sizes 7 to 16) and boys (CSS regular range, sizes 7 to 20). APPLICABLE PUBLICATION The following publicati

29、on is applicable to this standard: Canadian General Standards Board (CGSB) CAIWCGSB-49.6-M - Application of the Canada Standard System for Sizing of Girls and Boys Apparel. Reference to the above publication is to the latest issue unless otherwise specified by the authority applying this standard. T

30、he source for this publication is shown in the Notes section. REQUIREMENTS When measured in accordance with the defmitions applicable to Tables 2a, 2b and 2c, the garment shall conform to the dimensional requirements of this table. Unless otherwise specified, the gannent shall be measured with the f

31、abric smooth and fuliy extended without tension. DEFINITIONS A dimension is a measurable distance, whereas a measurement is a number (in some suitable units) indicating the magnitude of the dimension measured. The following terms are defmed on the fold-out sheet: size indicator body dimensions, crit

32、ical and minimum garment dimensions and reference body dimensions. Also included are the definitions applicable to the headings of the garment and reference body dimensions tables. SIZE MARKING AND LABELLING Examples of size marking and labelling are contained in CANKGSB49.6-M. The designation of si

33、ze is to be indicated by the appropnate size indicator body measurements or size code or both. NOTES Application of Garment Dimensions - Before this standard is used as a basis for a manufacturers pattern, it should be decided whether any of the minimum measurements of the dimensions in Tables 2a, 2

34、b and 2c should be exceeded because of style considerations. Such changes may be made within the requirements of this dimensional standard. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from I

35、HS-,-,-CGSB CANICGSB- 49-30-M9L * I1874650 000b722 763 6.2 Reference body dimensions that appear in Tables 3% 3b and 3c have been exrracted from body data contained in CAN/CGSB-49.6-M. For accuracy, the measurements of the dimensions have not been rounded. 6.3 Source of the Referenced. Publication -

36、 The publication referred to in par. 2.1.1 may be obtained from the CanadiLm General Standards Board, Sales Unit, Ottawa, Canada K1A 1G6. Telephone (819) 956-0425 or 956-0426. Fa (819) 956-5634, 2 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo repr

37、oduction or networking permitted without license from IHS-,-,-. . - CGSB CAN/CGSB- 49-30-M7L *.= L874b50 0006723 bTT shoulder padding is used, the sleeve length and armhole circmference must be increased accordingly. Sleeve Circumference at Elbow (Minimum) - Twice the distance across the sleeve at a

38、 position midway between the top of the armhole seam and Canadian General Standards Board Canada Standard Childrens Sizes 2 to 6X Unh Hood Height (Minimum) - With the hood placed flat as illustrated, the distance from the top to the bottom of the hood measured at the centre (G, Figure 2). Copyright

39、Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 49-30-M9L * 1874b50 000b724 53b css SIZE CODE 2 3 4 5 6 6X Unlined or Lightweight-Lined Outerwear Coa CRI B w f i i 1 SIZE INDICAT

40、OR BODY DIMENSIONS* Chest Hip Girth Girth 56 50 58 52.5 60 55 62 57.5 64 60 65 62 css SIZE CODE 2 3 4 5 6 6X SIZE INDICATOR BODY DIMENSIONS Measurements of size indicator body skin or lightweight underwear that relate to each individual garment size. These measurements are used to assign the appropr

41、iate size code to the wearer. Critical - The critic; dimensions represent those taken over good fit. FIGURE 2 * The approximate imperial equivalents of the metric size indicator body n * The measurements given for back and shoulder widths are not applicabli * The measurements given for armhole circw

42、nference and sleeve lengths a, * Since the waist level and the total length of coats or jackets may vary w preferred length of a coat is 2.5 cm above the knee level of the body, th L Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or ne

43、tworking permitted without license from IHS-,-,-CGSB CANICGSB- 49*30-M91 * m 1874650 0006725 472 m CRITICAL Back Width * 3 28 28.5 29 29.5 30 30.5 Coats and Jackets, Regular Range - Dimer MINIMUM Armhole Sleeve Neck Hood Circum- Length Cimm- ference * ference Aperture Width * at Elbow Shoulder Sleev

44、e Chest Cimm- Width ference * 71 29.5 35 41 25.5 32.5 20.5 73 30 36 44.5 26 33 20.5 75 30.5 37 48 26.5 33.5 21 71 31 38 51 27.5 34 21 79 31.5 39 55 28 34.5 21.5 80 32 39.5 56.5 28.5 35 21.5 GARMENT DIMENSIONS - The critical garment measurements in Table 2a are essential to a Minimum - The minimum ga

45、rment measurements shall not b than those in Table 2a. However, for style considerations these measurements may exceed the minimum specified and still con with the requirements of this standard. :!icator body measurements are provided in Appendix A for convenience. wt applicable to coats and jackets

46、 with raglan sleeves. eve lengths apply to coats and jackets with little or no shoulder padding. If shoulder Hing is used, the armhole circumference and sleeve s may vary with changes in style, the average nape-of-neck to waist. to hip, to crotch and to knee measurements are given for each size so t

47、i f the body, the garment length specified would be 2.5 cm less than the nape-of-neck to knee measurement shown in Table 3a. The measurem, Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-

48、,-,-CGSB CAN/CGSB- css SIZE CODE 2 3 4 5 6 6X C AN/C GSB-49.30-1M91 Nape-of-Neck Hip Girth to l0 to 10 waist Hip Crotch Knee * *+* *+ .* 50 19.8 30.8 33.8 46.9 52.5 21.7 33.1 37 51.6 55 23.7 35.5 39.7 56.3 57.5 25.6 38 42.9 61 60 27.5 40.5 46 65.7 62 28.8 42.1 47.6 68.6 - Dimensions ck ture .5 .5 .5

49、 All measurements are in centimetres. Hood Hood Width Height 20.5 25 20.5 26 21 27 21 28 21.5 28.5 21.5 29 measurements shall not be less style considerations these um specified and still comply i Il REFERENCE BODY DIMENSIONS Measurements of reference body dimensions are those provided primarily to assist clothing designers in locating garment design points.