CEPT T TE 07-02 E-1989 Test Procedures for Teletex《电传文件测试程序》.pdf

《CEPT T TE 07-02 E-1989 Test Procedures for Teletex《电传文件测试程序》.pdf》由会员分享，可在线阅读，更多相关《CEPT T TE 07-02 E-1989 Test Procedures for Teletex《电传文件测试程序》.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、CEPT T/TE*07-O2*E 2326434 00L00b 4 (3 Page E 1 Recommendation T/TE 07-02 (Odense 1986, revised in Edinburgh 1988) TEST PROCEDURES FOR TELETEX Recommendation proposed by Working Group T/WG 1 O “Terminal Equipment” (TE) Text of the Recommendation adopted by the “Telecommunications” Commission: “The Eu

2、ropean Conference of Postal and Telecommunications Administrations, considering that WG 10 has studied under the auspices of Question 7: Specification for equipment to be installed in customers premises as part of a public data network in order to attain functional and equipment harmonisation, recom

3、mends that the attached specification of engineering requirements for Teletex Testing be taken into account by all CEPT Administrations.” Administrations are free to stipulate additional requirements and also which of the optional requirements, if any, are to be provided. Note 1. It should be noted

4、that this Recommendation may be revised from time to time CEPT T/TE*07-02*E 2326414 00100b b = TITE 07-02 E Page 3 Table of Contents 1.SCOPE . 4 2. REFERENCES . 4 3. RELATIONSHIP TO CEPT RECOMMENDATION T/A 07-01 E 4 4. TEST LIMITATIONS 5 5. STRUCTURE OF THE RECOMMENDATION 5 Annex 1C TRANSPORT LAYER

5、Annex 1 N TRANSPORT LAYER (national requirements) Annex 2C SESSION LAYER Annex 2N SESSION LAYER (national requirements) Annex 3C SERVICE AND TERMINAL REQUIREMENTS Annex 3N SERVICE AND TERMINAL REQUIREMENTS (national requirements) Annex 4C TELETEX TEST TEXTS Annex 4N TELETEX TEST TEXTS (national requ

6、irements) Annex 5C DATA LINK LAYER IN CSPDN Annex 5N DATA LINK LAYER IN CSPDN (national requirements) Annex 6C NETWORK LAYER IN CSPDN Annex 6N NETWORK LAYER IN CSPDN (national requirements) O Edition of June 30, 1989 CEPT T/TE*07-02*E 2326434 00300b 8 . TITE 07-02 E Page 4 1. 1.2. 1.3. 1.4. 1.5. 1.6

7、. 1.7. 2. 2.1. 2.2. 2.3. 2.4. 3. 3.1. 3.2. 3.3. SCOPE This Recommendation contains and refers to test procedures to facilitate CEPT member bodies verification of the protocol and service conformance of Teletex systems in order to ensure the international compatibility of Teletex. Furthermore, the sp

8、ecific Teletex service and protocol definitions of CEPT are considered to harmonise the test procedures for those requirements. This Recommendation contains the CEPT-agreed test cases which may be used by the CEPT member countries. It also contains national test requirements. This Recommendation is

9、only applicable when considered together with the relevant CCITT Recommenda- tions T.63 and T.64. The test definitions for these related CCITT Recommendations, which define the Teletex service, are not duplicated in this Recommendation. The CEPT and national test procedures contained herein are base

10、d on requirements for Teletex systems in three main areas: a) Conformance testing procedures for the 1984 Teletex Recommendations, defined in CCITT, SG VIII. b) Characteristics of Teletex equipments, specified in CEPT Recommendation T/A 07-01 E, version May 1986. c) Characteristics of Teletex equipm

11、ents for CSPDN for layers 2 and 3, specified in CCITT, SG VIII. Therefore, the test procedures of this Recommendation cover all CEPT aspects of Teletex which have international end-to-end significance. Thus, tests for the network dependent layers (layers 2 and 3) of CSPDN are included. These test pr

12、ocedures do not supersede the relevant CCITT and CEPT Recommendations which continue to be the definitive specifications for all aspects of the Teletex service. The test procedures of this Recommendation, together with the test procedures in CCIT, are intended to assist verification and cannot fully

13、 guarantee the compliance of Teletex systems to the relevant Recom- mendations. REFERENCES This Recommendation refers to CCITT Recommendation T.64. The whole of Recommendation T.64 together with this Recommendation shall be applied for a comprehen- sive test of a Teletex system. This Recommendation

14、refers to CCITT Recommendation T. 63 which defines the Basic Teletex test pages and their encoding. The test pages of this Recommendation are only extensions to Recommendation T.63. This Recommendation refers to Recommendation T/A 07-01 E which is the basis for the European Teletex terminal equipmen

15、t specification. RELATIONSHIP TO CEPT RECOMMENDATION T/A 07-01 E The May 1986 version of CEPT Recommendation T/A 07-01 E will not be modified because a new 1990 version will be defined. The 1990 version will be available in mid-1988 (Recommendation T/TE 07-01bis E). This gives the CEPT member organi

16、sations the opportunity to harmonise or remove the national variants until 1990. In the meantime, the May 1986 version of Recommendation T/A 07-01 E does not reflect the current national variants. In principle, as test cases have to be derived from the original specifications, this update cannot the

17、refore take place until 1990. Therefore, the test cases for the national test requirements, contained in Recommendation T/TE 07-02 E, reflect the current status of each countrys national requirements to be used for testing purposes. The relevant definitions for these national requirements are detail

18、ed only in the national Teletex specifications. Edition of June 30 4. 4.1. 5. 5.1. 5.2. 5.3. 5.4. 5.5. 5.6. T/TE 07-02 E Page 5 TEST LIMITATIONS The tests will establish to an acceptable degree of reliability that a Teletex system conforms to the relevant Recommendations. It is not possible to test

19、for “complete conformance” due to: a) The immense number of state event combinations and possible valid and invalid PDU types which would require an unacceptably large amount of computational resources and time. b) The possibility that previous actions may affect the results of a particular test. c)

20、 “Transient” states that, although defined in the Recommendations may not be externally accessible. Therefore, the relevant test cases may or may not be used in the CEPT member countries. STRUCTURE OF THE RECOMMENDATION Test procedures applying to Transport, Session, Service, Terminal and CSPDN lowe

21、r layers requirements are contained in Annexes. In general, each Annex is sub-divided into separate parts. Each part covers the CEPT agreed tests (Annexes denoted by “C”) and national test (Annexes denoted by “N”). The Table of Contents gives the exact structure of this Recommendation. The scheme ad

22、opted for the test case numbering, in general, follows the format used in CCITT Recom- mendation T.64. “G” indicates that the test is carried out with the system under test calling and “D” indicates that the test is carried out with the system under test called. “T” indicates a test of local functio

23、ns. In the Annexes relating to the national requirements, the “G” or “D” is preceded by “NR” followed by a number. This extension to the numbering scheme indicates a national requirement test at transport, session layer or service and terminal. A full description of the test numbering scheme, test t

24、ypes and actions may be found in CCITT Recom- mendation T.64. All Annexes form an integral part of this Recommendation. Edition of June 30, 1989 CEPT T/TE*07-02*E = 2326414 0010071 b TITE 07-02 E Annex IC, Page 1 Annex IC, Transport Layer ADDITIONAL TESTS FOR T.70, CEPT REQUIREMENTS (See Recommendat

25、ion T.70, 1984 version) Description Test No. No additional CEPT requirements . Edition of June 30, 1989 CEPT T/TE*07-02*E 2326434 0030072 = case No. NR4/G1 T/TE 07-02 E Annex 1 N, Page 1 A B CH DDK E EI F GR I N NL P S SPUK X j. N R4/D 1 X Annex lN, Transport layer Test No. N R4/G 1 Object ADDITIONA

26、L TESTS FOR T.70, NATIONAL REQUIREMENTS (See Recommendation T.70, 1984 version) Test area Calling side Reference to T.70: 5.3.2.2 Use of MBit at Network Layer level for Transport block sizes greater than 128 octets The test cases defined in this Annex 1N are applicable to the countries identified by

27、 ? x ? in the following table. Test I Applicable to the country I action S-TCA S-TDT(RSSP) Tester detects R-TCR I R-TDT(CSS) R-TDT(CDS) R-TDT(CDU1) R-TDT(CDU1) Release of network connection a) state diagram route b) TPDU?s sent by the tester c) comments Transport Block size is 256 octets b) Note I b

28、) Note 2 a) 2.1-2.1 a) 2.1-2.1 a) 2.1-2.1 a) 2.1-2.1 c) a) 2.1-2.1 a) 0.2-1.1 a) 1.1-2.1 send document of i k octets Nofe 1. Value of TCR OE00130C00 Nofe 2. Value of TCA ODXX130C00 9000240018 9OXX240018 I Reference to T.70: 5.3.2.2 Test No. NR4ID1 Test area I Called side Object I Use of MBit at Netw

29、ork Layer level for Transport block sizes greater than 128 octets Tester action S-TCR S-TDT(CSS) S-TDT(CDS) S-TDT(CDU1) S-TDT(CDE) Release of network connection Tester detects R-TCA R-TDT(RSSP) a) state diagram route b) c) comments TPDU?s sent by the tester Transport Block size is 256 octets a) 0.2-

30、1.1 b) Note I a) 1.1-2.1 b) Note 2 a) 2.1-2.1 a) 2.1-2.1 a) 2.1-2.1 a) 2.1-2.1 c) a) 2.1-2.1 send document of i k octets Note I. Value of TCR OE00130C00 9000240018 Note 2. Value of TCA ODXX130C00 90XX2400 18 Edition of June 30, 1989 Test No. CEPT T/TE*07-02*E D 2326434 OOLOO73 T TITE 07-02 E Annex 2

31、C. Page 1 G1 G2 G3 G4 G5 Annex 2C, session layer ADDITIONAL TESTS FOR T.62, CEPT REQUIREMENTS (See Recommendation T/A 07-01 E, Paragraphs 3.5.2. and 3.5.3.) (See T.62, 1984 version) Description Presence of the Service Interworking Parameter within the normal document SUT submits a control document f

32、ollowed by a normal document suitable for forwarding to Telex. Check: - that the Service Interworking Parameter is present and is set to 1 within a normal document. Usage of nbtc shown in CSS SUT transmits a document using at least one nbtc from Table 3/T.62. If the SUT is using CDCL the tester will

33、 not repeat the already negotiated nbtc in CSS or RSSP. Check: - that the SUT negotiated correctly with CSS/RSSP; - that all supported nbtc parameters of Table 3/T.62 appear at least in CSS. Size of CDUI SUT transmits a page of more than 5000 octets. Check: - that the transmitted CDUIs contain not m

34、ore than 5000 octets. Additional Session Reference Number used within the same minute (Unable to apply.) Receiving of empty RSUI SUT transmits a document containing at least one page. Tester transmits an empty RSUI instead of RSUIlRDPBP or RSUI/RDEP followed by the correct response. Check: - that th

35、e SUT completed the transmission correctly and no interruption is indicated. Reference to T/A 07-01 E, Paragraph 3.5.2.-( i) 3.5.2.-(2) 3.5.2.-(4) 3.5.3.-(I) and 3.2.1.2dlT.62 3.5.3 .-(2) Edition of June 30, 1989 CEPT T/TE*07-02*E 232b4L4 OOL0074 L Presence of supported nbtc in RDCLP Tester sets up

36、a connection and transmits a CDCL containing all nbtc of Table 3lT.62. Check: - that the SUT indicates all supported nbtc in RDCLP; - that at least in RSSP indicated nbtc are present in RDCLP. Receiving capability of CDUI with the maximum length Tester establishes a connection and transmits a one pa

37、ge document containing one CDUI with 10000 octets. T/TE 07-02 E Annex 2C. Page 2 3.5.2.-(3) 3.5.2.-(4) Test No. D1 D2 D3 D4 Check: - that the SUT accepts and receives the complete document. Usage of Session User Data in CDS Tester establishes a connection and transmits CDS containing Session User Da

38、ta with more than 512 octets. Check: - that the SUT does not reject the CDS and accepts the following document - that the SUT rejects the CDS by transmitting CSA. or 3.5.2.-(9) and 5.1.2.14lT.62 Receiving of empty CSUI Tester establishes a connection and transmits CDS followed by an empty CSUI. Test

39、er continues the transmission of a complete document. Check: - that the document is received correctly. 3.5.3.-(2) Edition of June 30, IOpo CEPT T/TE*O-OZ*E 2326414 0010075 3 = T/TE 07-02 E Annex 2N, Page 1 Annex 2N, session layer ADDITIONAL TESTS FOR T.62, NATIONAL REQUIREMENTS (See Recommendation

40、T/A 07-01, Paragraph 3.5.4.) (See Recommendation T.62, 1984 version) The test cases defined in this Annex 2N are applicable to the countries identified by “ x “ in the following table. Test I Applicable to the country I Edition of June 30, 1989 I CEP” T/TE*07-02*E W 232b414 001007b 5 W Termination o

41、f transmission after given CSCC For the T.64 test case GN18 a 5 page document shall be used. Check: That the session is not aborted before the transmission of 4 pages (by CSA). TITE 07-02 E Annex 2N. Page 2 NR5/G3 NR5/G4 NR5/G5 NR5/Dl Description Test No. Capability to handle change control function

42、s Test CG2 (A) in Annex 3 of CCITT T.64 is mandatory. Reason: the tested function is mandatory. Maintenance of Source/Sink Relationship Extension to Test GE 94/2 of CCITT Recommendation T.64, Annex C2. The SPDU CSUI/CDS V2 shall also be used. Sending of CDC Test No. GN 15 of CCITT Recommendation T.6

43、4 shall be carried out. Reason: The function is mandatory. Reason Parameter in RSSN, PV set to ho1 Load SUT memory such that less than 2k octets are free (if possible). Attempt to transmit a document to SUT. Check: That SUT does not enter a session, e.g. responds to CSS with a RSSN with reason “rece

44、iving capabilities unable to enter a session”. NRS/Gl NR5/G2 Repetition of pages After execution of test GE9C/O and the SUT responses with CDC (R2) and repeats the not accepted page, the tester initiates a second RDPBN. Check: That this relevant page has not been transmitted again. Empty CDUI See T.

45、64 test DE23/5. Add the possible reaction: (R4) CDUI is accepted. Check: That the document is presented correctly. Usage of Request Session Function Param. I NR5/D3 I CG2 (B) in Annex 3 of CCITT Recommendation T.64 is mandatory. Reference to T/A 07-01 3.5.4.49) T/A 07-01 3.5.4.416) T/A 07-01 3.5.4.4

46、7) 3.7.4. Paragraph 5.31 T.60 TIA 07-01 3.5.4.44) T/A 07-01 3.5.4.46) TIA 07-01 3.5.4.47) Edition of June 30, 1989 ! CEPT T/TE*07-02*E = 2326434 OOL0077 7 = Test No. NR5/D4 NR5/D5 NR5iD6 NR5/D7 NR5iD8 NR5iD9 NRSIDIO Description Capability to transmit document(s) after change control CG2 (A) in Annex

47、 3 of CCITT Recommendation T.64 is mandatory. Handling of all types of document(s) Send a document to SUT of a document type that SUT does not support. Check: That SUT handles the document as a normal document. Linking of documents by CDC Tester starts a multipage document to SUT. Tester interrupts

48、the document transmission after having acknowledgement of at least one page. Tester continues document transmission by using CDC with inopportune parameter values of - TID of the called Terminal - TID of the calling Terminal - Date and Time - Additional session reference number Document reference nu

49、mber - Checkpoint reference number Check: That the document(s) is (are) accepted and presented correctly. Handling of monitor documents Tester sends a monitor document to SUT. Check: - that the document is accepted by the SUT or - that the document is rejected according to T.62. Handling of non-standardized capability parameter Tester sends a CSS or CDCL with non-standardized capability identifier with country-code (in accordance to T.35). Check : That in the corresponding responses the country-codc is not used in the PI “non-standardizcd capdbiiities”. Handling of Docum