CEN TS 14541-2013 Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U PP and PE materials《塑料管道和配件 未增塑聚氯乙烯(PVC-U) 聚丙烯(PP)和聚乙烯(PE)材料的应用特性》.pdf

《CEN TS 14541-2013 Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U PP and PE materials《塑料管道和配件 未增塑聚氯乙烯(PVC-U) 聚丙烯(PP)和聚乙烯(PE)材料的应用特性》.pdf》由会员分享，可在线阅读，更多相关《CEN TS 14541-2013 Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U PP and PE materials《塑料管道和配件 未增塑聚氯乙烯(PVC-U) 聚丙烯(PP)和聚乙烯(PE)材料的应用特性》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationPD CEN/TS 14541:2013Plastics pipes and fittings Characteristics for utilisationof non-virgin PVC-U, PP and PEmaterialsPD CEN/TS 14541:2013 PUBLISHED DOCUMENTNational forewordThis

2、 Published Document is the UK implementation of CEN/TS 14541:2013. It supersedes DD CEN/TS 14541:2007 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/88/1, Plastics piping for non-pressure applications.A list of organizations represented on this comm

3、ittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80005 4ICS 23.040.20

4、; 23.040.45Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate Text affectedPD CEN/TS 14541:2013TECHNICAL SPECIFI

5、CATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14541 May 2013 ICS 23.040.20; 23.040.45 Supersedes CEN/TS 14541:2007English Version Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials Tubes et raccords en plastique - Caractristiques po

6、ur lutilisation de matires non vierges en PVC-U, PP et PE Kunststoffrohrleitungen und Formstcke - Eigenschaften frdie Verwendung von Rcklaufmaterial und Recyclat aus PVC-U-, PP- und PE-Materialien This Technical Specification (CEN/TS) was approved by CEN on 6 November 2012 for provisional applicatio

7、n. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence o

8、f this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN

9、 is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

10、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation i

11、n any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 14541:2013: EPD CEN/TS 14541:2013CEN/TS 14541:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms, definitions and abbreviations 5 3.1 Terms and definitions .5 3.2 Abbreviations .5 4 U

12、tilisation of non-virgin material for non-pressure application .5 4.1 Own reprocessed material 5 4.2 External reprocessed and recycled materials with agreed specification 5 4.3 External reprocessed and recycled materials without agreed specification 6 5 Utilisation of non-virgin material for pressur

13、e application .8 5.1 Own reprocessed material 8 5.2 External reprocessed and recycled materials with agreed specification 8 5.3 External reprocessed and recycled materials without agreed specification 8 6 General guidance for utilisation of non-virgin material .9 Bibliography . 10 PD CEN/TS 14541:20

14、13CEN/TS 14541:2013 (E) 3 Foreword This document (CEN/TS 14541:2013) has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems”, the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the

15、 subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 14541:2007. The main changes are: definitions brought in line with common practice; application “Pressure piping systems” is introduced; a genera

16、l guidance has been added for utilisation of non-virgin materials; Annex A “Processing and performance of pipes and characteristics of recyclable material” is deleted. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to anno

17、unce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

18、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 14541:2013CEN/TS 14541:2013 (E) 4 1 Scope This Technical Specification specifies definitions and recommended characteristics and test methods for the utilisation of PVC-U, PP and PE non-virgin materials i

19、n pipes, fittings and ancillaries for both pressure and non-pressure piping systems. This Technical Specification specifies the conditions for utilisation of non-virgin material with and without agreed specification Non-virgin materials may be reformulated by the use of additives and processing tech

20、niques to meet an agreed specification. Typically the additives used would be stabilisers and pigments etc. The WG responsible for the product standard should consider the content of this document and only permit dosage levels which give compliance with the requirements of the product standard. Furt

21、her, the WG should consider whether extra or more frequent product testing is relevant when using such material in the production of pipes and fittings in accordance with the relevant product standard. NOTE For the purpose of this specification the term pipes means extruded pipes, gutters and any pa

22、rts of a fabricated fitting which is made from an extruded pipe. The term fitting means injection- and rotomoulded fittings and injection moulded parts of a fabricated fitting. For the recycling process, the testing and the use of the non-virgin material National and/or European regulations may appl

23、y. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

24、endments) applies. EN 12099, Plastics piping systems Polyethylene piping materials and components Determination of volatile content EN 10204:2004, Metallic products Types of inspection documents EN 15346:2007, Plastics Recycled Plastics Characterisation of poly(vinyl chloride) (PVC) recyclates EN IS

25、O 306, Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) (ISO 306) EN ISO 13229, Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value (ISO 13229) E

26、N ISO 1133-1, Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method (ISO 1133-1) EN ISO 1183-2, Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method (ISO 1183-2) EN ISO

27、 3451-1:2008, Plastics Determination of ash Part 1: General method (ISO 3451-1:2008) EN ISO 3451-5, Plastics Determination of ash Part 5: Poly(vinyl chloride) (ISO 3451-5) EN ISO 11357-6, Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal O

28、IT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6) PD CEN/TS 14541:2013CEN/TS 14541:2013 (E) 5 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 virgin material material in the form su

29、ch as granules or powder that have not been subjected to use or processing other than that required for their manufacture and to which no reprocessed or recycled material have been added 3.1.2 own reprocessed material material prepared from rejected unused pipes, gutters, fittings and ancillaries, i

30、ncluding trimmings from the production, that will be reprocessed in a manufacturers plant after having been previously processed by the same manufacturer by a process such as moulding or extrusion and for which the complete formulation is known 3.1.3 external reprocessed material material from the p

31、roduction of unused thermoplastic products, regardless of where they are manufactured 3.1.4 recycled material material from used thermoplastic products which have been cleaned and crushed or ground 3.1.5 agreed specification specification of the relevant material characteristics agreed between the s

32、upplier of the non-virgin material and the pipe, fitting and/or ancillary manufacturer 3.2 Abbreviations PE : polyethylene PP : polypropylene PP-MD : polypropylene modified by minerals PVC-U : unplasticized poly(vinyl chloride) MFR : melt mass-flow rate OIT : oxidation induction time 4 Utilisation o

33、f non-virgin material for non-pressure application 4.1 Own reprocessed material The use of clean, own reprocessed material for the production of pipes, gutters, fittings and ancillaries shall be permitted without limitations unless otherwise specified in the referring standard. 4.2 External reproces

34、sed and recycled materials with agreed specification External reprocessed and recycled material with an agreed specification shall be permitted for the production of pipes, gutters, fittings and ancillaries provided that all the following conditions are met: PD CEN/TS 14541:2013CEN/TS 14541:2013 (E)

35、 6 it shall at least cover the characteristics given in Tables 1, 2 and 3 for PVC-U, PP/PP-MD and PE, respectively. when determined in accordance with the test methods given in Tables 1, 2 and 3 for PVC-U, PP/PP-MD and PE, the actual values from these characteristics shall conform to the values give

36、n in the agreed specification. each delivery shall be covered by a declaration according to 4.1 of EN 10204:2004, showing conformity to the agreed specification by Inspection certificate 3.1, “type3.1“. This declaration can be made by either the material supplier or the product manufacturer as agree

37、d between the parties. The quality plan of the supplier of external reprocessed or recycled material should conform to EN ISO 9001 1. 4.3 External reprocessed and recycled materials without agreed specification The use of clean external reprocessed and recycled materials without agreed specification

38、 for the production of pipes, gutters, fittings and ancillaries shall not be permitted unless otherwise specified in the referring standard. Table 1 Characteristics of external reprocessed and recycled PVC-U that should be included in the agreed specification Characteristic Unit Test methoda, bRemar

39、k Densitykg/m3EN ISO 1183-2 Filler content by ash rest % by mass EN ISO 3451-5 Linked to PVC content K-valueEN ISO 13229 Vicat softening temperatureC EN ISO 306 Particle size mm Sieve analysis Type of pigments and stabiliser By analysis Impurities Annex C of EN 15346:2007 or evaluation of sheets or

40、evaluation of micronized material Extraneous polymers IR analyses or DSC Presence aSamples shall be taken from the compounded and pelletised or from each individual material batch source. The frequency of sampling shall be agreed between supplier and product manufacturer and where relevant, the cert

41、ification body. bIf the source of the material is consistent, e.g. pipes and fittings or other products produced under a quality mark. It is not required to test those material characteristics covered by the quality mark. When deciding the amount of characteristics to be tested, the frequency with w

42、hich they have to be tested and the related requirements at least the following should be considered: 1) the recycling process and sources of the material because of risk of impurities; 2) the processing of the material into the end product; 3) the wanted characteristics of the end product; 4) possi

43、ble limitations of sources for the recyclable material; 5) the intended dosage level of the material. PD CEN/TS 14541:2013CEN/TS 14541:2013 (E) 7 Table 2 Characteristics of external reprocessed and recycled PP and PP-MD that should be included in the agreed specification Characteristic Unit Test met

44、hoda, bRemark Density kg/m3EN ISO 1183-2 Thermal Stability OIT min EN ISO 11357-6 Temperature 200 C MFR g/10 min EN ISO 1133-1 Ash residue % EN ISO 3451-1:2008 Extraneous polymers IR analyses or DSC Presence Impurities Mesh filtering Use agreed mesh size Type of pigments and/or additives By analysis

45、 Optional; to be agreed between purchaser and supplier Volatile matter mg/kg EN 12099 aSamples shall be taken from the compounded and pelletised or from each individual material batch source. The frequency of sampling shall be agreed between supplier and product manufacturer and where relevant, the

46、certification body. bIf the source of the material is consistent, e.g. pipes and fittings or other products produced under a quality mark. It is not required to test those material characteristics covered by the quality mark. When deciding the amount of characteristics to be tested, the frequency wi

47、th which they have to be tested and the related requirements at least the following should be considered: 1) the recycling process and sources of the material because of risk of extraneous polymers and impurities; 2) the processing of the material into the end product; 3) the wanted characteristics

48、of the end product; 4) possible limitations of sources for the recyclable material; 5) the intended dosage level of the material. PD CEN/TS 14541:2013CEN/TS 14541:2013 (E) 8 Table 3 Characteristics of external reprocessed and recycled PE that should be included in the agreed specification Characteri

49、stic Unit Test methoda,bRemarks Density kg/m3EN ISO 1183-2 Thermal stability OIT min EN ISO 11357-6 Temperature 200 C MFR g/10 min EN ISO 1133-1 Ash residue % EN ISO 3451-1:2008 Extraneous polymers IR analysis or DSC Presence Impurities Mesh filtering Use agreed mesh size Type of pigments and/or additives By analysis Optional; to be agreed between purchaser and supplierVolatile matter mg/kg EN 12099 aSamples shall be taken from the compounded and pelletised or from each individual material batch source. The f