CEN TR 16045-2010 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods《建筑产品-评估释放有害物质管.pdf

《CEN TR 16045-2010 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods《建筑产品-评估释放有害物质管.pdf》由会员分享，可在线阅读，更多相关《CEN TR 16045-2010 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods《建筑产品-评估释放有害物质管.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationPD CEN/TR 16045:2010Construction Products Assessment of releaseof dangerous substances Content of regulateddangerous substances Selection of analytical methodsPD CEN/TR 16045:201

2、0 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR16045:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/557, Construction products - Assessment of dangeroussubstances.A list of organizations represented on this committee

3、 can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 57318 7ICS 91.100.01Compliance with a British Standard cannot confer immunity fromlegal obligat

4、ions.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 December 2010.Amendments issued since publicationDate Text affectedPD CEN/TR 16045:2010TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16045 November 2010 ICS 91.100.01 En

5、glish Version Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods Produits de construction - Evaluation des missions de substances dangereuses - Contenu en substances dangereuses rglementes - Slection des

6、 mthodes analytiques Bauprodukte - Bewertung der Freisetzung von gefhrlichen Substanzen - Inhalt von geregelten gefhrlichen Substanzen - Auswahl von analytischen Verfahren This Technical Report was approved by CEN on 5 June 2010. It has been drawn up by the Technical Committee CEN/TC 351. CEN member

7、s are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S

8、weden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Member

9、s. Ref. No. CEN/TR 16045:2010: EPD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 2 Contents Page Foreword 41 Scope 62 Abbreviations, terms and definitions 62.1 Abbreviations . 62.2 Terms and definitions . 73 Approach 84 Available content test methods114.1 Introduction 114.2 Inorganic substances 114.2.1 Maj

10、or, minor and trace elements114.2.2 Anions .184.2.3 Special analysis of Cr (VI) .204.2.4 Non-destructive methods .224.3 Total organic carbon .224.4 Organic substances 234.4.1 General 234.4.2 Gas extraction and analytical methods for measuring VOC (SVOC) content of products 274.4.3 Solvent extraction

11、 and related analytical methods for measuring organic substances in solid matrices 305 Test methods for eluates obtained by leaching .335.1 Introduction 335.2 Inorganic substances in eluates 345.3 Organic substances in eluates .365.4 Method for dissolved organic matter (DOC) .396 Particles 396.1 Int

12、roduction 396.2 Asbestos .406.3 Synthetic vitreous (silicate) fibres .407 Performance of methods 428 Conclusions and recommendations 428.1 Conclusions .428.1.1 General 428.1.2 Specific comments for specific substances .438.2 Recommendations .44Annex A (informative) Background to CEN/TC 351/WIs 6/14

13、Content .46A.1 Description in mandate M/366 (CEN/TC 351 N 004) .46A.2 Description in the work programme of CEN/TC 351, as drafted by CEN/BT WG 176 in June 2005 and confirmed by CEN/TC 351 (CEN/TC 351 N 0026) 46A.3 Draft proposal to activate WI 00351007 (CEN/TC 351/WG 5 N 022) 47Annex B (informative)

14、 Compilation of content regulations for construction products for health or environmental reasons .48B.1 Introduction 48B.2 Regulated substances .49B.3 Regulations 52Annex C (informative) Standards for metals in alloys .54Bibliography 56PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 3 Tables Table 1 Majo

15、r, minor and trace elements to be considered under the CPD and available test methods . 12Table 2 Digestion methods for major, minor and trace elements 13Table 3 Analytical methods for major, minor and trace elements 16Table 4 Anions to be considered under the CPD and available test methods 18Table

16、5 Digestion methods for anions . 19Table 6 Analytical methods for anions . 20Table 7 Specific element to be considered under the CPD and available test methods . 21Table 8 Methods for extraction and analysis of Cr (VI) . 21Table 9 Instrumental quantification methods for major, minor and trace elemen

17、ts . 22Table 11 Organic substances to be considered under the CPD and available test methods . 24Table 12 Gas extraction and analysis methods for measuring VOC (SVOC) content of products . 28Table 13 Solvent extraction and analytical methods for measuring organic substances in solid matrices 31Table

18、 14 Analytical methods for inorganic substances in eluates . 34Table 15 Analytical methods for organic substances in eluates 36Table 16 Quantification methods for DOC . 39Table 17 Particles to be considered under the CPD and available test methods . 40Table 18 Quantification methods for asbestos 40T

19、able 19 Quantification methods for silicate fibres 41Table B.1 Content regulated substances in the I“Indicative list“ . 49Table B.2 Regulations regarding content in the indicative list . 52Table C.1 List of standards for metals in alloys, etc. . 54Figures Figure 1 Principles of horizontal analytical

20、 methods . 10PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 4 Foreword This document (CEN/TR 16045:2010) has been prepared by Technical Committee CEN/TC 351 “Construction Products Assessment of release of dangerous substances”, the secretariat of which is held by NEN. Attention is drawn to the possibilit

21、y that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associ

22、ation. Under Work Item 6, Mandate M/366 describes the need for CEN standards to test the chemical content of construction products. However, in the first meeting of CEN/BT WG 176, the predecessor to CEN/TC 351 (June 2005, Gouda, The Netherlands), it was decided that a Technical Report (TR) should be

23、 drafted first. This TR was for administrative reasons given work item (WI) number 14. The background and guidelines for carrying out this work are outlined in Annex A of this report: a wide range of methods exist, focus will be on existing documents; one of the criteria for the selection of standar

24、d test methods could be the information on validation; content determination should not be used for certification of emissions unless this is the only practicable or legally correct solution. It is emphasized that the focus of the CPD is on the release of dangerous substances, not on content. Conten

25、t testing may only be applied for product release/emissions certification of a material if emissions testing is prohibitively expensive or when it is specifically required by regulation for example in the case of banned substances such as certain metals or asbestos. However, content testing may be u

26、seful as a complementary quick screening method for in-house quality control of product emissions (e.g. as a routine check of product uniformity/conformity). Content tests can also be relevant within the scope of the continuous surveillance by the approved bodies or further testing of samples by the

27、 manufacturer (see Annex III of the CPD). Content testing methods may or may not be relevant to predicting the release to soil, surface and groundwater or the emission into indoor air. However, there are precedents for content-testing-type methods being used as a guide to release and emissions. An e

28、xample for this concept is the German “regulation“ for cementitious materials in contact with drinking water, which includes content values for some trace elements in cements as screening test (German DVGW Worksheet W 347, 2). These values are not a criterion for exclusion, but the meaning is that l

29、eaching tests for trace elements on test pieces (mortar or concrete) are only necessary if the total trace element content in the cement is above these values. Other examples of standards committees and industries that have followed this route in relation to compounds that could emit into indoor air

30、 include paints and varnishes (ref.: EN ISO 17895), wood-based panels (ref.: EN 120 and EN 717-2), toy testing (ref.: EN 71-11:2005, Annex B), the car industry for interior trim components (e.g. Method VDA 278 and similar standards) and hard disk drive manufacturers (various company-specific test pr

31、otocols for emissions from PC components). Most of these methods use gas extraction at elevated temperatures combined with GC-MS as the analytical approach. This methodology has the advantage that it is similar to the analytical approach used in formal emissions test methods, which means that, in so

32、me instances, there is a degree of qualitative and quantitative PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 5 correlation between the content-type test method and reference emissions test methods. There are however limitations. The VOC content will unlikely bear any relationship to an emission profile

33、 in the case of composite construction products or materials in which the VOCs are encapsulated or otherwise locked-in to the product to prevent emission. Content testing is also not relevant to assessing secondary emissions. Because of the similarity of the analytical methods for digests and eluate

34、s from leaching, for reasons of completeness and efficiency (no separate report necessary) the analysis of eluates from leaching is also covered in this Technical Report. To make a separate report would lead to an almost full duplication of the present report. The additional benefit of addressing bo

35、th aspects is the coherence that is becoming obvious from Figure 1. PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 6 1 Scope This Technical Report describes appropriate standard test methods for the determination of the content of regulated dangerous substances in construction products. Because of the si

36、milarity of the analytical methods for digests and eluates from leaching, the analysis of eluates from leaching is also covered. This Technical Report is relevant to all substances covered by the provisions of the main body of Mandate M/366, i.e. those included in the work programme for the emission

37、 into indoor air, and release to surface water, ground water and soil. The list of regulated substances provided by the Commission in document “Indicative list of regulated dangerous substances“ 1 defines the substances, for which analytical methods for content will in principle be needed. This repo

38、rt will be limited to this list. NOTE 1 Sampling for content analysis is addressed by applying the relevant product standards and or by applying WI 00351013, Construction products Assessment of release of dangerous substances Complement to sampling (TR 4) 7 in case the sampling protocol for technica

39、l properties does not adequately address requirements in testing posed by the assessment of release to soil, surface and groundwater. NOTE 2 Based on this selection of appropriate test methods from other fields, horizontal test methods for analysing the chemical content of construction products will

40、 be developed as ENs. NOTE 3 In Annex B a compilation is given of the content regulations for construction products for health or environmental reasons. 2 Abbreviations, terms and definitions NOTE In this paragraph some of the abbreviations and terms used in this report, are defined. 2.1 Abbreviatio

41、ns AES atomic emission spectrometry CPD construction products directive DOC dissolved organic carbon DS dangerous substances HPLC high-performance liquid chromatography, high-pressure liquid chromatography ICP inductively coupled plasma GC gas chromatography MS mass spectrometry OES optical emission

42、 spectrometry SVOC semi-volatile organic compounds TD thermal desorption TOC total organic carbon VOC volatile organic compounds PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 7 VVOC very volatile organic compounds NOTE There are several definitions of VVOC, VOC and SVOC in use: a) by the World Health Or

43、ganization (WHO): VVOC boiling point is in the range from 0 C (50 C to 100 C) VOC boiling point is in the range from (50 C to 100 C) to (240 C to 260 C) SVOC boiling point is in the range from (240 C to 260 C) to (380 C to 400 C) b) by European Collaborative Action Report No 18: VVOC all compounds w

44、hich, in a capillary column coated with 100 % dimethylpolysiloxane, are eluted before n-hexane VOC all volatile organic compounds which, in a capillary column coated with 100 % dimethylpolysiloxane, are eluted with a retention range between n-hexane and n-hexadecane SVOC all semi-volatile organic co

45、mpounds which, in a capillary column coated with 100 % dimethylpolysiloxane, are eluted with a retention range between n-hexadecane and n-docosane c) by some national regulations and RL 2004/42/EG: VOC any organic compound having an initial boiling point less than or equal to 250 C measured at a sta

46、ndard pressure of 101,3 kPa 2.2 Terms and definitions For the purposes of this document, the terms and definitions in the CEN/TC 351 document on Terminology (CEN/TC 351 N 0218, under development) and the following apply. 2.2.1 digest solution resulting from acid digestion of a test sample 2.2.2 dige

47、stion mineralization of the organic matter of a sample and dissolution of its mineral part (as completely as possible) when reacted with a reagent mixture NOTE Usually done with a strong, concentrated acid like aqua regia or nitric acid to solve inorganic substances for chemical analysis. 2.2.3 elua

48、te solution obtained from a laboratory leaching test of a test sample 2.2.4 extract solution resulting from extraction of a test sample with a solvent PD CEN/TR 16045:2010CEN/TR 16045:2010 (E) 8 2.2.5 extraction dissolution of substances from a sample into a solvent for subsequent chemical analysis NOTE Usually done with an organic solvent to extract organic substances for chemical analysis or for special analysis of inorganic substances. 2.2.6 product matrix main composition of the product dictating the manner of sample pre-treatment and the type of digestion or extraction for later chemi