CEN TR 15894-2009 Building hardware - Door fittings for use by children elderly and disabled people in domestic and public buildings - A guide for specifiers《建筑五金件 住宅和公共建筑内供儿童 老年人和.pdf

《CEN TR 15894-2009 Building hardware - Door fittings for use by children elderly and disabled people in domestic and public buildings - A guide for specifiers《建筑五金件 住宅和公共建筑内供儿童 老年人和.pdf》由会员分享，可在线阅读，更多相关《CEN TR 15894-2009 Building hardware - Door fittings for use by children elderly and disabled people in domestic and public buildings - A guide for specifiers《建筑五金件 住宅和公共建筑内供儿童 老年人和.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN/TR15894:2009ICS91.190NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAWPUBLISHED DOCUMENTBuilding hardware Door fittingsfor useby children, elderlyanddisabled peopleindomestic andpublicbuildingsAguideforspecifiersThisPublished Documentwas publishedundertheauthorityoftheStandardsPoli

2、cyandStrategy Committee on30November2009.BSI2009ISBN9780580638145Amendments/corrigendaissuedsincepublicationDate CommentsPDCEN/TR15894:2009NationalforewordThisPublishedDocumentistheUKimplementationofCEN/TR15894:2009.TheUKparticipationinitspreparationwasentrustedtoTechnicalCommitteeB/538/4,Buildingha

3、rdware.Alistof organizationsrepresentedonthiscommitteecanbeobtainedonrequesttoitssecretary.Thispublicationdoesnotpurporttoincludeallthenecessaryprovisionsofacontract.Usersareresponsibleforitscorrectapplication.CompliancewithaBritishStandardcannotconferimmunityfromlegalobligations.PD CEN/TR 15894:200

4、9TECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN/TR 15894August 2009ICS 91.190English VersionBuilding hardware - Door fittings for use by children, elderly anddisabled people in domestic and public buildings - A guide forspecifiersQuincaillerie pour le btiment - Accessoires de portes pourenf

5、ants, personnes ges ou personnes handicapes dansles habitations et btiments publics - Guide destin auxprescripteursSchlsser und Baubeschlge - Trbeschlge zur Nutzungdurch Kinder, ltere und behinderte Menschen in privatenund ffentlichen Gebuden - Ein Leitfaden fr PlanerThis Technical Report was approv

6、ed by CEN on 23 May 2009. It has been drawn up by the Technical Committee CEN/TC 33.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

7、 Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of explo

8、itation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TR 15894:2009: EPD CEN/TR 15894:2009CEN/TR 15894:2009 (E)2 Contents PageForeword 3Introduction . 41Scope. 52Normative references 53Terms and definitions 54How to use this guidance document . 55Guidelines for

9、 selecting hardware products. 65.1 General 65.2 Building category . 65.3 Purpose of the door. 65.4 Interface between users and door 65.5 Product functions 75.6 Economic aspects 75.7 Suitabilityassessment of hardware products 86Guidelines for product specifications. 86.1 General 86.2 Proposed scheme

10、for suitability assessment of products for particularapplications 8Annex A (informative) Guidelines for suitability assessment of hardware products. 9A.1General 9A.2What the intended application requires. 9A.3What the product offers. 10Annex B (informative) Guidelines for hardware product specificat

11、ion . 13B.1 General 13B.2Locks, bolts, cylinders and keys 15B.3Door furniture, handles, handrails, and door protection hardware 21B.4 Panic and emergency exit devices andsystems 24B.5Hinges and pivots 31B.6Door closing/opening devices and systems for swing doors. 34B.7 Powered pedestrian doors 40B.8

12、Sliding door gear 47Bibliography 51PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)3 Foreword This document (CEN/TR 1 5894:2009) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, buildinghardware and curtain walling”, the secretariat of which is held by AFNOR.Attention is drawn

13、to the possibility that some of the elements of this document maybe the subject ofpatent rights.CEN and/or CENELEC shall not beheld responsible for identifying any or all suchpatent rights. Europe has a population of 800 million of whom over 1 00 million are children and elderly people and50 million

14、 are declared asdisabled (the latter figure includes many people who are alsoelderly). The European Union has 77 million elderly people and 43 million people registered as disabled. Theseconsumers with special needs constitute a major (and growing) part of the populationwho daily comeinto contact wi

15、th the numerous barriers that exist in and outside of buildings. This European guidance document aims to help designers, specifiers and building managers orowners to identifyand include the needs of children, elderly and disabled persons, by enabling peoplewith low physical strength, dexterityand ma

16、nipulativeimpairment, to be able to open, close and lockdoors.It includes general guidelines for selecting hardware products and guid elines for product specifications. It also includes the following annexes: Annex A - Guidelines for suitability assessment of hardware products; Annex B Guidelines fo

17、r hardware product specification.Ultimately the intention of this guidance document is to make existing hardware products andstandards more suitable with regard to their use by children, the eld erly and disabled. NOTE If needed, these guidelinesmay be included as informative annexes in future revis

18、ions of suitablehardware product standards.PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)4 Introduction The essential function of building hardware is to provide easyaccess to all users regardless of theirabilityor disability. Doors should be of a minimum clear opening width to accommodate wheelchairsand

19、 should be easyto use. For example, this requires low friction hinges and carefully selected doorcontrols, possiblyusing low energy door operators, powered or automatic operatorsorelectromagnetic devices.The correct choice of door furniture with easy-to-use locking systems and good signage all add u

20、p toan acceptable combination. Generally, this is no more thanwould be asked of any responsiblespecification. This guide is intended to enable installers to correctly follow building specifications and to make sure that buildings are correctly equipped for their intended use.One of the main challeng

21、es to specifiers , architects, manufacturers and builders is to ensure that thespecification, design and construction do not result in the environment of an elderly or disabledperson appearing different from the rest of the community.This European guidance document is people-based and it is essentia

22、l that specifiers r ecognize thatthe individual needs of users can vary. Users should be consulted frequentlyin the specification and installation processes. The specification should recognize that buildings are often occupied by non-disabled and younger people, as well as elderly and disabled peopl

23、e. Similarly, these members of the community need to move freely and safely in the wider environment.Where dimensions/measurements are given for guidance purposes, they are subject to the tolerancesincorporated in any appropriateproduct or construction standard. National regulations,whereapplicable,

24、 should take precedence.It is recognized that local regulations and certain types of door construction (such asaluminium)mayprevent specifiers from achieving all the recommendations in this do cument. In these circumstances, the needs of the building occupants should be considered and the best possi

25、ble compromise should be achieved.This European guidancedocument refers to the following mandates: M/273-ICT, M/283-Elderly and Disabled, M/292-Product information, M/293-Child safety and CEN Guide 6.This European guidance document does not refer to EN 1 221 7 which contains selected maximumoperatin

26、g forces considered unsuitable for children, elderly and disabled people to use and does nottake into consideration doors fitted with emergencyand panic exit devices and systems, or doorclosing devices.PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)5 1 ScopeThis European guidance document provides guidanc

27、e on the selection of existing building hardwareformanually and power operated pedestrian doors and associated products whose integration intothe design of buildings willmake themmore safe, secure and convenient for the occupants in clusiveof children, elderly and disabled people to use (“design for

28、 all“). Although it isintended for people withreduced physical and sensorial capabilities, it maynot cover all specific individual needs. For example, it may not cover all needs of blind people or those not able to move unassisted. 2 Normative referencesThe following referenced documents are indispe

29、nsable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latestedition of the referenceddocument (including any amendments) applies.N/A3 Terms and definitions For the purposes of this document, the following terms and definitions a

30、pply.3.1C.E.D.abbreviation for Children, Elderly and Disabledpeople3.2clear opening width horizontal distance, measured parallel to door frame, between nearest points ondoor frame and leaf, less the protrusion of any hardware mounted less than 1 800 mm above nominal floor height, withdoor at maximum

31、 opening positionNOTE National regulations may accept deviations or tolerances.4 How to use this guidance document The following steps should be undertaken by specifiers (architects, etc.) to select the suitable product to specify for the intended application, and by manufacturers to offer the appro

32、priate product: Step 1. Specifier: define users environmental situationRefer to Clause 5, Annex A and Table A.1 to define needs. Step 2.Specifier: define hardware product functionsRefer to Table B.1 to determine relevant product categoryand hence appropriate Annex. Step 3. Specifier: define users ne

33、edsRefer to appropriate part of Annex B for recommended suitable products. Step 4. Manufacturer: define product offerRefer to appropriate part of Annex B to list for recommended product specifications. PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)6 Step 5. Specifier: match users needs and product offer

34、Select suitable product to be specified for intended application.5 Guidelines for selecting hardware products 5.1 General The objectivewith this partof the document is to help specifiers assess what the application requires. It provides guidelines for selecting hardware products. Specifiers should b

35、e aware that building hardware standards cover onlyhardware products and donot specify maximummanual operating forces for the complete door. The door manufacturers should inform the market about the test re sults for the forces to operate the hardware in their doorconstruction, for example to open/c

36、lose doors and to engage/release and lock/unlock the hardwareusing a key or handle.5.2 BuildingcategoryFor selecting hardware products, specifiers should define the purpose of the building such as: residential, commercial, industrial, public building, etc.; location of the door: internal door, exter

37、nal door; alternative use, day and night use, use byvarious groups, etc.5.3Purpose of the doorFor selecting hardware products, specifiers should define the purpose of the door, such as: fire/smokeresistance; burglar resistance; access/egress/flow control; thermal insulation, energy saving, etc.; win

38、d/water penetration resistance; noisereduction; smell reduction; light reduction.5.4Interface between users and doorFor selecting hardware products, specifiers should define the interface betweenusers and the door.The following types of user should be taken into account: all public; children;PD CEN/

39、TR 15894:2009CEN/TR 15894:2009 (E)7 elderly; mobilityimpaired.For selecting hardware pr oducts, specifiers should also define the limitation on ability to operate the hardware, such as: height/reach restriction (applies mainlyto children); strength/grip restriction; mental restriction (relates to “m

40、ental age”); one hand only; no hands; sight impairment; hearing impairment; confined to wheelchair (manually operated or powered). 5.5 Product functionsAlthough the ergonomic functionis the primary concern for children, elderlyand disabled people(C.E.D.), other functions are particularly important a

41、nd should also be provided by the products tomeet other users needs with regards to: convenience : ergonomics, usage and durability, privacy, aesthetic design, see-through, etc.; safety : escape and ability to release in case of emergency and panic situations, self closing andsafety in case of fire,

42、 safety in use or risk o f injury, personal safety; security: protection against burglaryorattack, from inside/both sides, access/flow control, protection against vandalism, abuse, etc.5.6Economic aspectsWhen considering economic aspects of a product specification, it is important to take into accou

43、nt thefollowings factors: cost of product; cost of installation; cost ofmaintenance (all costs to maintain intended product functions).Where conflicting aspects may affect a product specification, alternative solutions should beconsidered according to a priorityorder. As an example, one may consider

44、 the following priority order:1 )escape and ability to release in case of emergency and panic situations;2) self closing and safetyin case of fire; 3) risk of injury;PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)8 4) personal safety;5) ergonomics;6) protection against burglary;7) access/flow control;8) p

45、rotection against vandalism, abuse; 9) usage and durability;1 0) privacy;11) aesthetic design;1 2) etc.5.7Suitability assessment of hardware productsThis guide provides to specifiers a m odel scheme forsuitability assessment of hardware products asnecessary to meet the users need in a specific appli

46、cation.NOTESee Annex A.6 Guidelines for product specifications6.1 General This clause offers general recommendations for manufacturers f or each product categorywith regardto: purpose of the hardware; different types and accessories; product standards; installation and maintenance; requirements with

47、 regard to safety, security, convenience and cost.6.2Proposed scheme for suitability assessment of productsfor particularapplicationsThis guide provides to specifiers a model scheme for hardware product specification, as required foreach product category.NOTE See relevant parts of Annex B for each p

48、roduct group.PD CEN/TR 15894:2009CEN/TR 15894:2009 (E)9 Annex A(informative)Guidelines for suitability assessment of hardware products A.1 GeneralThere are three basic areas to consider. Who has to use the door, or “Interface between users and door”? What is the reason for the door, or “Purpose of d

49、oor”? What functions are expected of the door and/or its fittings, or “Additional f unctions”?Furthermore, these areas can be examined under two headings: 1 . what the intended application requires;2. what the product offers. Items 1 and 2 can then be compared to determine the suitability of a product for a particularapplication. This is described in more detail below.NOTE The risk assessment is part of the evaluation and should be used to determine the priority order. A.2What the intended application requ