CEN TR 13387-5-2015 Child use and care articles - General safety guidelines - Part 5 Product information《儿童用保育品 通用安全指南 第5部分 产品信息》.pdf

《CEN TR 13387-5-2015 Child use and care articles - General safety guidelines - Part 5 Product information《儿童用保育品 通用安全指南 第5部分 产品信息》.pdf》由会员分享，可在线阅读，更多相关《CEN TR 13387-5-2015 Child use and care articles - General safety guidelines - Part 5 Product information《儿童用保育品 通用安全指南 第5部分 产品信息》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TR 13387-5:2015Child use and care articles General safety guidelinesPart 5: Product informationPD CEN/TR 13387-5:2015 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR 13387-5:2015. Together with PD CEN/TR 13387-1:2015, PD C

2、EN/TR 13387-2:2015, PD CEN/TR 13387-3:2015 and PD CEN/TR 13387-4:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee CW/1, Safety of child use and child care products.A list of organizations represented on this com

3、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 87781 0 ICS 97.

4、190 Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedTECHNICAL REPORT RAPPORT TECHN

5、IQUE TECHNISCHER BERICHT CEN/TR 13387-5 July 2015 ICS 97.190 Supersedes CEN/TR 13387:2004English Version Child use and care articles - General safety guidelines - Part 5: Product information This Technical Report was approved by CEN on 12 January 2015. It has been drawn up by the Technical Committee

6、 CEN/TC 252. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

7、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of ex

8、ploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 13387-5:2015 EPD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 2 Contents European foreword .3 1 Scope 4 2 Terms and definitions .4 3 Marking of the product and any packaging 4 3.1 General 4 3.2 Visible

9、 markings 5 3.3 Additional markings 5 3.4 Durability of markings .5 4 Purchase information 5 5 Instructions for use .5 6 Warning sentences 6 6.1 Warning sentences 6 6.2 Warning symbols .6 Bibliography 7 PD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 3 European foreword This document (CEN/TR 13387-5:2

10、015) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo

11、r identifying any or all such patent rights. This document supersedes CEN/TR 13387:2004. This is a revision of CEN/TR 13387 first published in 1999. It is a Technical Report which provides guidance information on common hazards that should be taken into consideration when developing safety standards

12、 for child use and care articles. CEN/TR 13387 comprises the following five parts: Safety philosophy and safety assessment (CEN/TR 13387-1) Chemical hazards (CEN/TR 13387-2) Mechanical hazards (CEN/TR 13387-3) Thermal hazards (CEN/TR 13387-4) Product information (CEN/TR 13387-5) CEN/TR 13387-5 shoul

13、d be used in conjunction with CEN/TR 13387-1. This new edition of this European Technical Report is a hazard based technical report. In comparison with the previous version, the main changes related to the section on Product information are: When preparing CEN/TR 13387-5, CEN/CLC Guide 11 “Product i

14、nformation relevant to consumers Guidelines for standard developers” and ISO/IEC Guide 50 “Safety aspects - Guidelines for child safety” have been taken into consideration. PD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 4 1 Scope Product information given in standards has a direct impact on safety. I

15、t should contribute to avoiding risks to the child. However, product information is not intended to compensate for design deficiencies and does not in itself make a product safer but is a means for the manufacturer to communicate with the user. Reasonable foreseeable misuse and risks of the product

16、should be made explicit and adequate warnings be given. All product information should be in the language(s) of the country in which the product is sold. It should be presented so that it is unambiguous, legible and easy to read and comprehend. A risk analysis should be applied to identify those haz

17、ards for which safety-related product information is required. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 product information texts and images that may accompany or be associated with a specific child use and care article Note 1 to entry

18、: This includes marking of the product and any packaging, purchase information and instructions for use. Electronic information may be supplied in conjunction with written versions. 2.2 marking of the product product information permanently attached to the child use and care article Note 1 to entry:

19、 Where the packaging creates the risk, marking should be attached to the packaging. All markings belong to one of the categories purchase information and instructions for use, or both. Too much information should be avoided, as this could detract from safety warnings. 2.3 purchase information inform

20、ation provided on the product and/or its packaging at the point of sale that will enable the purchaser to make an informed choice before purchasing the product Note 1 to entry: This information should be provided in mail order catalogues etc. as well as on the product and/or its packaging. 2.4 instr

21、uctions for use information provided regarding safety, assembly, installation, operation, storage, maintenance, repair etc 3 Marking of the product and any packaging 3.1 General Markings should be permanently attached to or on the product. Markings should not hinder product use nor create a new risk

22、. Where packaging could create a risk, it should have warnings permanently attached to it. Safety related information should only be provided in relation to known hazards of the child use and care article under consideration. PD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 5 Too much marking could obs

23、cure important safety information. If marking the product would not be possible (e.g. the product or parts of the product are too small) the information may be presented in an alternative way. However, additional efforts should be made to draw the users attention to the information but without the c

24、reation of a new risk. 3.2 Visible markings Markings indicating warnings should be visible when the product is being used. The following information should be marked on the product: specific warning sentences and symbols which are selected as the basis of the safety philosophy described in Clause 1

25、if the packaging creates a risk of suffocation, it should be marked with a warning, for example: “WARNING!: Keep this (plastic) cover away from your child to avoid suffocation” or with similar words that convey the same meaning. 3.3 Additional markings The product should also be marked with at least

26、 the following information: identification of the product; identification of the manufacturer, importer or organization responsible for its sale; identification of the relevant European standard. 3.4 Durability of markings Suitable requirements and a test method for testing markings should be given

27、in the standard. The warnings should be provided in a permanent/legible format which the consumer would have to take a decisive action to remove or obliterate. 4 Purchase information Purchase information enables the consumer to make an informed choice (e.g. by specifying any age/weight/ability limit

28、ation or compatibility information) when purchasing the child care and use article. Purchase information should be provided at the point of sale. 5 Instructions for use Instructions for use should be provided and include at least information regarding safety, assembly, installation, operation, stora

29、ge, maintenance, repair etc Instructions should be marked: “Read these instructions carefully before use and keep them for future reference.”. The instructions for use should include all purchase information and all markings. Information for safe operation/intended use of the product should be in ac

30、cordance with the results of a risk assessment. Instructions for assembly and/or installation should include, where relevant, an inventory of parts and/or special skills or tools required. PD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 6 Instructions for use should be as simple and brief as possible,

31、 and readily understandable by a carer with no previous experience of the product. The instructions for use should be divided into: warnings which should be given in the form to be stated in the standard; additional information which can be presented in any form. For further information regarding in

32、structions for use reference can be made to EN 82079-1:2012 ” Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements”. 6 Warning sentences 6.1 Warning sentences An informative annex with translation of warnings in the langua

33、ges of CEN members should be provided in products standards. In the case of severe hazards, a signal word, preferably WARNING should be added at the beginning of a warning sentence or at the top of a list of separated warnings. 6.2 Warning symbols Currently the following symbol is used in some child

34、 use and care safety standards to mean: “WARNING Never leave your child unattended.” The symbol in Figure 1 can be used in addition to the safety sentence. Figure 1 Warning symbol PD CEN/TR 13387-5:2015CEN/TR 13387-5:2015 (E) 7 Bibliography 1 EN 82079-1:2012, Preparation of instructions for use - St

35、ructuring, content and presentation - Part 1: General principles and detailed requirements 2 CEN/CLC Guide 11:2012, Product information relevant to consumers Guidelines for standard developers 3 ISO/IEC GUIDE 50, Safety aspects Guidelines for child safety Additional sources of information relating t

36、o warning sentences 4 ISO/IEC Guide 37:2012, Instructions for use of products by consumers 5 Instructions for Consumer Products-Guidelines for Better Instructions & Safety Information for Consumer Products, Consumer Safety Unit, Department of Trade and Industry, HMSO Books, London, England, 1988 6 A

37、NSI Guide for Developing User Product Information. ANSI, New York, USA 7 TROMMELEN M. Products for children: Standardisation of warnings. Consumer Safety Institute, Amsterdam, The Netherlands, 1994 This page deliberately left blankThis page deliberately left blankBSI is the national body responsible

38、 for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick

39、High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refine

40、d through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our we

41、bsite at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need internati

42、onal and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to Briti

43、sh Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts

44、 on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out

45、 more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you

46、 can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity wit

47、hin a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information

48、 used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form o

49、r by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7