CECC MUAHAG VOL 4 IS 4-1993 Preferred Products List Magnetic Components and Ferrite Materials (En)《首选产品列表 磁组件及铁素体原料 (En)》.pdf
《CECC MUAHAG VOL 4 IS 4-1993 Preferred Products List Magnetic Components and Ferrite Materials (En)《首选产品列表 磁组件及铁素体原料 (En)》.pdf》由会员分享,可在线阅读,更多相关《CECC MUAHAG VOL 4 IS 4-1993 Preferred Products List Magnetic Components and Ferrite Materials (En)《首选产品列表 磁组件及铁素体原料 (En)》.pdf(45页珍藏版)》请在麦多课文档分享上搜索。
1、1974499 00711655 TT2 PROFESSIONAL COMPONENT SERVICES DEFENCE RESEARCH AGENCY PREFERRED PRODUCTS LIST Magnetic Components and Ferrite Materials LISTE PREFERENTIELLE DE COMPOSANTS ELECTRONIQUES Composants Magnetiques et Ferrites LISTE BEVORZUGTER PRODUKTE Magnetkomponente und Ferritelemente COMPILED B
2、Y MUAHAG Military Usage t al 3 o) v) - e O O Copyright CENELEC Electronic Components Committee Provided by IHS under license with CECCNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1974499 O073657 875 VOLTIME 04, ISSUE 4 CHANGE RECORD SHEET Page 3 Date of Issue No
3、v 93 Issue No 4 Description see VOLUME O. 2. SCOPE This volume lists: Magnetic circuit. fiCft Section Silicon Iron Oriented Cores. Magnetic oxide cores Magnetic oxide toroids Radio frequency coils Delay lines Transformers 3. SELECTION OF COMPONENT TYPES The Chapters in this VOLUME select component t
4、ypes chosen from the relevant CECC-Detail Specifications or National Specifications/standards. only for the first selection of a component type. Designers of equipment using component types from this VOLUME shall select preferred components to achieve rationalisation, long term availability must be
5、confirmed with the manufacturer. Data given in the following TABLES are Moreover, that where applicable the designer has to meet MANDATORY SAFETY REQUIREMENTS such as: IEC 65 Safety requirements for mains operated electronic apparatus, IEC 695 Fire hazards testing for electro-technical products. Cop
6、yright CENELEC Electronic Components Committee Provided by IHS under license with CECCNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-= 1974499 0071b59 bY8 VOLUME 04, ISSW 4 PREFACE Page 5 4. GUIDANCE ON USE OF THE TABLES - Components qualified to CECC specificatio
7、ns will be preferred and will be listed at the head of the tables presented, followed by components qualified to National Specifications. It is anticipated that in the future Preferred components will be qualified to CECC European -800 series specifications which will eventually replace manufacturer
8、s CECC specifications and National Specifications. For more detailed information see relevant specification or contact manufacturer. CLIMATIC CATEGORY 55/125/56 are the standard characteristics for component types of this volume. It is given in the column llClimatic categoryll. SPECIFICATIONS For pr
9、ocurement PURPOSE within MUAHAG the IDENTIFICATION NUMBER (Ordering designation) should always start with the complete number of the relevant CECC-Detail Specification. MANUFACTURERS PART NUMBER Identification number used by the manufacturer (Only for information) CAT/. QUAL For CATEGORY please refe
10、r to VOLUME O. Q = Qualified Manufacturer NQ = Not Qualified manufacturer. Manufacturers are expected to complete the qualification process within a two year period otherwise the listed products may be removed for this VOLUME. Copyright CENELEC Electronic Components Committee Provided by IHS under l
11、icense with CECCNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1974499 0073bbO 3bT VOL- 04, ISSUE 4 PREFACE Page 6 CHARACTERISTICS - - Chapter 1 - “Magnetic circuit “Cl Section. C Cores are available in Lamination thickness usually of 0,30 mm, 0,l mm and 0,05 mm.
12、They are also usually supplied in “preferred“ strip width dimensions, ranging from 5 to 200 mm. As a broad guide a lamination thickness of 0,3 mm would be used for wound components at power frequencies in the 50/60 Hz band, 0,l mm at power frequencies in the 400Hz band, and 0,05 mm at high frequenci
13、es or for wound components used in tfpulsell applications. Maximum working flux density is generally around 1,5 Tesla. With 0,3 mm material this would have an iron los of Approx. 2 watts/Kg at a 50 Hz operating frequency with 0,1 mm material, the iron loss would be approx. 20 watts/Kg at a 400Hz ope
14、rating frequency. Chapter 2 - Magnetic oxide cores for wirewound inductors and low power transformers: The different shapes of components fix the electrical, electromagnetic characteristic of the component ie. E shape : E cores and EC cores are used for low or medium power transformers at frequencie
15、s from 10 to 300 KHz. ETD (Economic transformer design) are developed for transformers up to 1OOOW and application frequencies up to 200KHz. Pot core (Round pot) are used to build transformers requiring low leakage inductances. The finished component consists of a coilfomer (one or two sections), tw
16、o cores halves, (high permability and low loss material) and clamps. RM (Rectangular module = Square pot) are used for constructing with a good shielding of magnetic stray field. high density mounting without a mutual coupling. This allows a Chapter 3 - Magnetic oxide toroids for general purposes. M
17、agnetic oxide toroids with high permeability find use in a variety of components ie. pulse transformers, converter transformers, wide band transformer. It has the advantage that no audible noise occurs as a result of magnetostriction as with laminated cores. Due to the high saturation inductance, th
18、ese toroids are also suitable for us as loading coils. The frequency range suggested is less than 100KHz. The diameter range is graded fro 2,5 mm to 100 mm. Copyright CENELEC Electronic Components Committee Provided by IHS under license with CECCNot for ResaleNo reproduction or networking permitted
19、without license from IHS-,-,-D 3974499 OOLbb3 2Tb VOL- 04, ISSW 4 PREFACE Page 7 Chapter 4 Table 1 : Table 2 : Table 3 : Table 4 : Chapter 5 - Radio frequency coils, wirewound adjustable or mn-adjustable. These chokes are manufactured with windings of enamelled copper wire with tinned axials leads.
20、Depending on the value the core consists of a carbonyl iron, ferrite, or non ferrous material. Core chokes are especially suitable to limit the leakage current, for safety requirements for example with a high asymmetric inductance. Adjustable inductance value. board mounting. Suitable for printed wi
21、ring Miniature chip with high temperature-stable enamel copper wire, wound on a square shape ferrite core. These are suitable for automatic placement. - Delays lines. delay linestf delay an analogue or logic signal with minimum of distorsion with a large range of delays and impedance. They are const
22、ructed from “lumped constantIl inductive and capacitive elements. Active delays lines are used with TTL or DTL logic and delay as well as regenerate the signal. Chapter 6 - Transformers for General and Specific Use. The capability “boundaries“ listed in this chapter cover the construction of wound c
23、omponents over a complete spectrum of Power and frequency requirements, ranging from Power frequencies using Laminated cores including ilC1l cores, and Ferrite cores, and Toroids for use at High Frequencies Assemblies range from small PCB mounted products, to Free standing Clamped and Bolted product
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- CECCMUAHAGVOL4IS41993PREFERREDPRODUCTSLISTMAGNETICCOMPONENTSANDFERRITEMATERIALSEN 首选 产品 列表 组件 铁素体 原料

链接地址:http://www.mydoc123.com/p-591598.html