CAN CSA-ISO IEC ISP 15124-1-2001 Information Technology - International Standardized Profile FOD126 - Open Document Format Image Applications - Enhanced Document Structure - Charac.pdf

《CAN CSA-ISO IEC ISP 15124-1-2001 Information Technology - International Standardized Profile FOD126 - Open Document Format Image Applications - Enhanced Document Structure - Charac.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC ISP 15124-1-2001 Information Technology - International Standardized Profile FOD126 - Open Document Format Image Applications - Enhanced Document Structure - Charac.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of CanadaCAN/CSA-ISO/IEC ISP 15124-1-01(ISO/IEC ISP 15124-1:1998)International Standardized Profile ISO/IEC ISP 15124-1:1998 (first edition, 1998-07-01), has beenadopted without modification as CSA Standard CAN/CSA-ISO/IEC ISP 15124-1-01, which has beenapproved as a National Standa

2、rd of Canada by the Standards Council of Canada.ISBN 1-55324-353-6 March 2001G35G48G49G48G55G48G51G46G48 G51G58G50G45G48G55G2cG36G32G12G2cG28G26 G2cG36G33 G14G18G14G15G17G10G14G1dG14G1cG1cG1bGbG28GcThe Canadian Standards Association, which The Standards Council of Canada is theoperates under the nam

3、e CSA International coordinating body of the National Standards system, (CSA), under whose auspices this National Standard a federation of independent, autonomoushas been produced, was chartered in 1919 and organizations working towards the furtheraccredited by the Standards Council of Canada to the

4、 development and improvement of voluntaryNational Standards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership association The principal objects of the Council are to foster engaged in standards development and certification and promot

5、e voluntary standardization as a means activities. of advancing the national economy, benefiting theCSA standards reflect a national consensus of health, safety, and welfare of the public, assisting producers and users including manufacturers, and protecting the consumer, facilitating domestic consu

6、mers, retailers, unions and professional and international trade, and furthering internationalorganizations, and governmental agencies. The cooperation in the field of standards.standards are used widely by industry and commerce A National Standard of Canada is a standard whichand often adopted by m

7、unicipal, provincial, and federal has been approved by the Standards Council ofgovernments in their regulations, particularly in the Canada and one which reflects a reasonablefields of health, safety, building and construction, and agreement among the views of a number of capablethe environment. ind

8、ividuals whose collective interests provide to theIndividuals, companies, and associations across greatest practicable extent a balance ofCanada indicate their support for CSAs standards representation of producers, users, consumers, anddevelopment by volunteering their time and skills to others wit

9、h relevant interests, as may be appropriateCSA Committee work and supporting the Associations to the subject in hand. It normally is a standardobjectives through sustaining memberships. The more which is capable of making a significant and timelythan 7000 committee volunteers and the 2000 contributi

10、on to the national interest.sustaining memberships together form CSAs total Approval of a standard as a National Standard ofmembership from which its Directors are chosen. Canada indicates that a standard conforms to theSustaining memberships represent a major source of criteria and procedures estab

11、lished by the Standardsincome for CSAs standards development activities. Council of Canada. Approval does not refer to theThe Association offers certification and testing services technical content of the standard; this remains thein support of and as an extension to its standards continuing respons

12、ibility of the accrediteddevelopment activities. To ensure the integrity of its standards-development organization.certification process, the Association regularly and Those who have a need to apply standards arecontinually audits and inspects products that bear the encouraged to use National Standa

13、rds of CanadaCSA Mark. whenever practicable. These standards are subject In addition to its head office and laboratory complex to periodic review; therefore, users are cautioned in Toronto, CSA has regional branch offices in major to obtain the latest edition from the organizationcentres across Cana

14、da and inspection and testing preparing the standard.agencies in eight countries. Since 1919, the Association The responsibility for approving National Standards has developed the necessary expertise to meet its of Canada rests with thecorporate mission: CSA is an independent service Standards Counc

15、il of Canadaorganization whose mission is to provide an open and 270 Albert Street, Suite 200effective forum for activities facilitating the exchange of Ottawa, Ontario, K1P 6N7goods and services through the use of standards, Canadacertification and related services to meet national andinternational

16、 needs.For further information on CSA services, write toCSA International178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitabil

17、ity for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology International Standardized Profile FOD126 Open Document Format: Image Applications Enhanced documentstructure Character, raster graphics, and geometric graphicsCAN/CSA-ISO/IEC ISP 15124-1-0

18、1 content architecture Part 1: Document Application Profile (DAP)March 2001 CSA/1CAN/CSA-ISO/IEC ISP 15124-1-01Information technology International Standardized ProfileFOD126 Open Document Format: Image Applications Enhanceddocument structure Character,raster graphics, and geometricgraphics content

19、architecture Part 1: Document ApplicationProfile (DAP)CSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committ

20、ee (CAC) on ISO/IEC Joint Technical Committee 1 onInformation Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada part

21、icipates in the International Telegraph andTelephone Consultative Committee (ITU-T). This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is av

22、ailable on request from the CSA Project Manager.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representati

23、ve. This Standard has been formally approved, without modification, bythese Committees and has been approved as a National Standard of Canada by the Standards Council ofCanada.March 2001 CSA International 2001All rights reserved. No part of this publication may be reproduced in any form whatsoever w

24、ithout the prior permissionof the publisher. ISO/IEC material is reprinted with permission. Inquiries regarding this National Standard of Canadashould be addressed to CSA International, 178 Rexdale Boulevard, Toronto, Ontario, M9W 1R3.B CReference numberISO/IEC ISP 15124-1:1998(E)INTERNATIONALSTANDA

25、RDIZEDPROFILEISO/IECISP15124-1First edition1998-07-01Information technology InternationalStandardized Profile FOD126 OpenDocument Format: Image Applications Enhanced document structure Character,raster graphics, and geometric graphicscontent architecture Part 1:Document Application Profile (DAP)Tech

26、nologies de linformation Profil normalis international FOD126 Format de document ouvert: Applications dimage Structure dedocument amliore Architecture du contenu des caractres, desgraphiques raster et des graphiques gomtriques Partie 1: Profil dapplication de documentISO/IEC ISP 15124-1:1998(E) ISO/

27、IEC 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.ISO/IEC Copyright Office Case postale 56 CH-

28、1211 Genve 20 SwitzerlandiiContents1 SCOPE 12 NORMATIVE REFERENCES.12.1 IDENTICAL RECOMMENDATIONS | INTERNATIONAL STANDARDS22.2 PAIRED RECOMMENDATIONS|INTERNATIONAL STANDARDS EQUIVALENT IN TECHNICAL CONTENT .22.3 ADDITIONAL REFERENCES33 DEFINITIONS AND TERMINOLOGY53.1 DEFINITIONS 53.2 CONSTITUENT NA

29、MES 53.3 CONVENTIONS .54 RELATIONSHIP TO OTHER INTERNATIONAL STANDARDIZED PROFILES.65 CONFORMANCE .65.1 DATA STREAM CONFORMANCE 65.2 IMPLEMENTATION CONFORMANCE.76 CHARACTERISTICS SUPPORTED BY THIS PART OF ISO/IEC ISP 15124.76.1 OVERVIEW.76.2 LOGICAL CONSTITUENTS 86.3 LAYOUT CONSTITUENTS.86.3.1 Overv

30、iew of the layout characteristics96.3.2 DocumentLayoutRoot .96.3.3 Page characteristics96.3.3.1 CompositePage 106.3.3.2 Page dimensions 106.3.3.3 Nominal page sizes 106.3.4 OriginalImage.106.3.5 RevisionAnnotation.106.3.6 SpecificBlock.116.3.7 GenericBlock.116.4 DOCUMENT LAYOUT CHARACTERISTICS.156.5

31、 CONTENT LAYOUT AND IMAGING CONTROL .156.5.1 Raster graphics content 156.5.1.1 Introduction .156.5.1.2 Raster graphics content architecture.166.5.1.3 Raster graphics encoding methods 166.5.1.4 Raster presentation 176.5.2 Character content .176.5.2.1 Character content architecture class .176.5.2.2 Ch

32、aracter repertoires 186.5.2.3 Code extension techniques.186.5.2.4 Line spacing.206.5.2.5 Character spacing206.5.2.6 Character path and line progression .216.5.2.7 Character orientation 21 ISO/IEC ISO/IEC ISP 15124-1:1998(E)iii6.5.2.8 Emphasis216.5.2.9 Tabulation226.5.2.10 Alignment.226.5.2.11 Fonts

33、226.5.2.12 Reverse character strings.236.5.2.13 Superscripts and subscripts .236.5.2.14 Substitution of characters 236.5.2.15 Use of control functions .246.5.3 Geometric graphics content246.6 MISCELLANEOUS FEATURES.246.6.1 Resource documents246.6.2 Application comments.256.7 DOCUMENT MANAGEMENT FEAT

34、URES .256.7.1 Document constituent information256.7.2 Document characteristics .256.7.3 Non-basic document characteristics.266.7.3.1 Profile character sets.266.7.4 Document management attributes 277 SPECIFICATION OF CONSTITUENT CONSTRAINTS 287.1 NOTATION287.2 DOCUMENT PROFILE CONSTITUENT CONSTRAINTS

35、 .297.2.1 Macro definitions297.2.2 Constituent constraints .357.2.2.1 DocumentProfile357.3 LOGICAL CONSTITUENT CONSTRAINTS .387.4 LAYOUT CONSTITUENT CONSTRAINTS387.4.1 Macro definitions387.4.2 Factor constraints.387.4.3 Constituent constraints .397.4.3.1 DocumentLayoutRoot 397.4.3.2 CompositePage 39

36、7.4.3.3 OriginalImage407.4.3.4 RevisionAnnotation407.4.3.5 SpecificBlock417.4.3.6 GenericBlock427.5 LAYOUT STYLE CONSTRAINTS437.6 PRESENTATION STYLE CONSTRAINTS .437.6.1 Macro definitions.437.6.2 Factor constraints437.6.3 Presentation style constituent constraint 437.6.3.1 PStyle1 .437.6.3.2 PStyle2

37、 .447.6.3.3 PStyle3 .447.7 CONTENT PORTION CONSTRAINTS 447.7.1 Macro definitions447.7.2 Factor constraints.457.7.3 Constituent constraints .457.7.3.1 Character content portion457.7.3.2 Raster graphics content portion.457.7.3.3 Geometric graphics content portion 467.8 ADDITIONAL USAGE CONSTRAINTS.478

38、 INTERCHANGE FORMAT.478.1 INTERCHANGE FORMAT ODIF (CLASS A) 478.1.1 Interchange format478.1.2 DAP identifier .478.1.3 Encoding of application comments.478.2 INTERCHANGE FORMAT SDIF 488.2.1 Interchange format488.2.2 DAP identifier .48ISO/IEC ISP 15124-1:1998(E) ISO/IECiv8.2.3 Encoding of application

39、comments.488.3 ENCODING OF RASTER CONTENT INFORMATION .48ANNEX A (NORMATIVE) AMENDMENTS AND CORRIGENDA.50A.1 AMENDMENTS.50A.1.1 Amendments to the base standard 50A.2 CORRIGENDA 50A.2.1 Corrigenda to this part of ISO/IEC ISP 15124 50ANNEX B (INFORMATIVE) RECOMMENDED PRACTICES51B.1 TRANSFER METHODS FO

40、R ODA 51B.1.1 Conveyance of ODA over ITU X.400-1984 51B.1.2 Conveyance of ODA over FTAM51B.1.3 Conveyance of ODA over DTAM .52B.1.4 Conveyance of ODA over flexible disks52B.2 FONT REFERENCE52B.3 ISO/IEC 8632 (CGM) CONSTRAINTS FOR THIS INTERNATIONAL STANDARDIZED PROFILE 53B.3.1 Delimiter elements54B.

41、3.2 Metafile descriptor elements54B.3.3 Picture descriptor elements 54B.3.4 Control elements54B.3.5 Graphical primitive elements 54B.3.6 Attribute elements55B.3.7 External elements 56B.4 INTEROPERABILITY WITH SGML APPLICATIONS57ANNEX C (INFORMATIVE) REFERENCES TO OTHER STANDARDS AND REGISTERS58List

42、of figuresFigure 1 - Constituents 8Figure 2 - Document layout structure 9Figure 3 - Code extension features (basic case) 19Figure 4 - Code extension features (all possible cases) 20List of tablesTable 1 - Dimensions for various page sizes 12Table 2 - Layout attributes 12Table 3 - Content coding attr

43、ibutes 13Table 4 - Presentation attributes 13Table 5 - Document profile attributes 14Table 6 - Symbols to denote shift functions 28 ISO/IEC ISO/IEC ISP 15124-1:1998(E)vForewordISO (the International Organization for Standardization) and IEC (the International ElectrotechnicalCommission) form the spe

44、cialized system for worldwide standardization. National bodies that are members ofISO or IEC participate in the development of International Standards through technical committees establishedby the respective organization to deal with particular fields of technical activity. ISO and IEC technicalcom

45、mittees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition

46、to developing International Standards, ISO/IEC JTC 1 has created a Special Group on FunctionalStandardization for the elaboration of International Standardized Profiles.An International Standardized Profile is an internationally agreed, harmonized document which identifies astandard or group of stan

47、dards, together with options and parameters, necessary to accomplish a function or setof functions.Draft International Standardized Profiles are circulated to national bodies for voting. Publication as anInternational Standardized Profile requires approval by at least 75 % of the national bodies cas

48、ting a vote.International Standardized Profile ISO/IEC ISP 15124-1 was prepared with the collaboration of- Asia-Oceania Workshop (AOW);- European Workshop for Open Systems (EWOS);- Open Systems Environment Implementors Workshop (OIW).ISO/IEC ISP 15124 consists of the following part, under the genera

49、l title Information technology - InternationalStandardized Profile FOD126 - Open Document Format: Image Applications - Enhanced document structure -Character, raster graphics, and geometric graphics content architecture: Part 1: Document Application Profile (DAP)Further parts may be added.Annex A forms an integral part of th