CAN CSA-ISO IEC 13818-1C-2015 Information technology - Generic coding of moving pictures and associated audio information - Part 1 Systems AMENDMENT 3 Transport of HEVC video over .pdf

《CAN CSA-ISO IEC 13818-1C-2015 Information technology - Generic coding of moving pictures and associated audio information - Part 1 Systems AMENDMENT 3 Transport of HEVC video over .pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 13818-1C-2015 Information technology - Generic coding of moving pictures and associated audio information - Part 1 Systems AMENDMENT 3 Transport of HEVC video over .pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO/IEC 2014. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.Amendment 3:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15(ISO/IEC 13818-1:2013, IDT)National Standard of CanadaAmendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15Information technology Generic coding of m

2、oving pictures andassociated audio information Part 1: SystemsAMENDMENT 3: Transport of HEVC video over MPEG-2 systems(ISO/IEC 13818-1:2013, IDT)Standards Update ServiceAmendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15December 2015Title: Information technology Generic coding of moving pictures an

3、d associated audioinformation Part 1: SystemsAMENDMENT 3: Transport of HEVC video over MPEG-2 systemsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 24

4、24061.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Reference numberISO/IEC 13818-1:2013/Amd.3:2014(E)ISO/IEC 2014INTERNATIONAL STANDARD ISO/IEC138

5、18-1Fourth edition2013-06-15AMENDMENT 32014-04-15Information technology Generic coding of moving pictures and associated audio information Part 1: Systems AMENDMENT 3: Transport of HEVC video over MPEG-2 systems Technologies de linformation Codage gnrique des images animes et du son associ Partie 1:

6、 Systmes AMENDEMENT 3: Transport de vido HEVC sur les systmes MPEG-2ISO/IEC 13818-1:2013/Amd.3:2014(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mecha

7、nical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso

8、.org ii ISO/IEC 2014 All rights reservedAmendment 3:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.3:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardiz

9、ation. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutu

10、al interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordan

11、ce with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standa

12、rd requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 3 to I

13、SO/IEC 13818-1:2013 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration with ITU-T. The identical text is published as Rec. ITU-T H.222.0 (2012)/ Amd.3 (01/2014). ISO/IE

14、C 2014 All rights reserved iiiAmendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.3:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.3 (01/2014) 1 INTERNATIONAL STANDARD RECOMMENDATION ITU-T Information technology Generic coding of moving pictures and associated audio information: Sys

15、tems Amendment 3 Transport of HEVC video over MPEG-2 systems 1) Clause 1.2.2 Add the following references: Recommendation ITU-T H.265 (2013), High efficiency video coding. ISO/IEC 23008-2:2013, Information technology High efficiency coding and media delivery in heterogeneous environments Part 2: Hig

16、h efficiency video coding. 2) Clauses 2.1.95 to 2.1.109 Add the following definitions after clause 2.1.94: 2.1.95 HEVC video stream: A byte stream as specified in Rec. ITU-T H. 265 | ISO/IEC 23008-2 Annex B. 2.1.96 HEVC access unit: An access unit as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2 wit

17、h the constraints specified in 2.17.1. 2.1.97 HEVC 24-hour picture (system): An HEVC access unit with a presentation time that is more than 24 hours in the future. For the purpose of this definition, HEVC access unit n has a presentation time that is more than 24 hours in the future if the differenc

18、e between the initial arrival time tai(n) and the DPB output time to,dpb(n) is more than 24 hours. 2.1.98 HEVC slice: An HEVC independent slice segment and zero or more subsequent HEVC dependent slice segments preceding the next HEVC independent slice segment (if any) within the same HEVC access uni

19、t. 2.1.99 HEVC slice segment: A byte_stream_nal_unit with nal_unit_type in the range of 0 to 9 and 16 to 23, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.100 HEVC dependent slice segment: An HEVC slice segment with the syntax element dependent_slice_segment_flag in the slice header set to a

20、 value equal to 1, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.101 HEVC independent slice segment: An HEVC slice segment with the syntax element dependent_slice_segment_flag in the slice header set to a value 0 or inferred to be equal to 0, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2.

21、 2.1.102 HEVC tile of slices: One or more consecutive HEVC slices which form the coded representation of a tile, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.103 HEVC still picture (system): An HEVC still picture consists of an HEVC access unit containing an IDR picture preceded by VPS, SPS

22、 and PPS NAL units, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2, that carry sufficient information to correctly decode this IDR picture. Preceding an HEVC still picture, there shall be another HEVC still picture or an end of sequence NAL unit terminating a preceding coded video sequence, as def

23、ined in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.104 HEVC video sequence (system): A coded video sequence as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.105 HEVC video sub-bitstream: A subset of the NAL units of an HEVC video stream in their original order. Amendment 3:2015 (IDT) to CAN/CSA-IS

24、O/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.3:2014 (E) 2 Rec. ITU-T H.222.0 (2012)/Amd.3 (01/2014) 2.1.106 HEVC temporal video sub-bitstream: An HEVC video sub-bitstream that contains all VCL NAL units and associated non-VCL NAL units of the temporal sub-layer, as specified in Rec. ITU-T H.265 | ISO/IE

25、C 23008-2, associated with TemporalId equal to 0 and which may additionally contain all VCL NAL units and associated non-VCL NAL units of all temporal sub-layers associated with a contiguous range of TemporalId from 1 to a value equal to or smaller than sps_max_sub_layers_minus1 included in the acti

26、ve sequence parameter set, as specified in Rec. ITU-T H.265 | ISO/IEC 23008-2. 2.1.107 HEVC temporal video subset: An HEVC video sub-bitstream that contains all VCL NAL units and the associated non-VCL NAL units of one or more temporal sub-layers, as specified in Rec. ITU-T H.265 | ISO/IEC 23008-2,

27、with each temporal sub-layer not being present in the corresponding HEVC temporal video sub-bitstream and TemporalId associated with each temporal sub-layer forming a contiguous range of values. NOTE According to the constraints for the transport of HEVC specified in 2.17.1, each temporal sub-layer

28、of an HEVC video stream is present either in the HEVC temporal video sub-bitstream or in exactly one HEVC temporal video subset which is carried in a set of elementary streams that are associated by hierarchy descriptors. This prevents the multiple inclusion of the same temporal sub-layer and allows

29、 aggregation of the HEVC temporal video sub-bitstream with associated HEVC temporal video subsets according to the hierarchy descriptors, as specified in 2.17.3. 2.1.108 HEVC highest temporal sub-layer representation: The sub-layer representation of the temporal sub-layer with the highest value of T

30、emporalId, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2, in the associated HEVC temporal video sub-bitstream or HEVC temporal video subset. 2.1.109 HEVC complete temporal representation: A sub-layer representation as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2 that contains all temporal sub-la

31、yers up to the temporal sub-layer with TemporalId equal to sps_max_sub_layers_minus1+1 as included in the active sequence parameter set, as specified in Rec. ITU-T H.265 | ISO/IEC 23008-2. 3) Clause 2.4.2.6 Replace the following two paragraphs: Replace: The delay of any data through the system targe

32、t decoder buffers shall be less than or equal to one second except for still picture video data and ISO/IEC 14496 streams. Specifically: tdn(j) t(i) 1 second for all j, and all bytes i in access unit An(j). with: The delay of any data through the system target decoder buffers shall be less than or e

33、qual to one second except for still picture video data, ISO/IEC 14496 and ISO/IEC 23008-2 streams. Specifically: tdn(j) t(i) 1 second for all j, and all bytes i in access unit An(j). Replace: For ISO/IEC 14496 streams, the delay is constrained by tdn(j) t(i) 10 seconds for all j, and all bytes i in

34、access unit An(j). with: For ISO/IEC 14496 and ISO/IEC 23008-2 streams, the delay is constrained by tdn(j) t(i) 10 seconds for all j, and all bytes i in access unit An(j). 4) Clause 2.4.2.11 Add the following new clause immediately after clause 2.4.2.10: 2.4.2.11 T-STD extensions for carriage of HEV

35、C T-STD extensions and T-STD parameters for the decoding of HEVC video streams are defined in 2.17.2 and 2.17.3. Program stream support including P-STD extensions and P-STD parameters are not specified for HEVC video streams. Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/A

36、md.3:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.3 (01/2014) 3 5) Clause 2.4.3.5In the paragraph specifying the discontinuity_indicator, add at the end of the bulleted list introduced by “For the purpose of this clause, an elementary stream access point is defined as follows“: HEVC video streams or HEVC

37、temporal video sub-bitstreams The first byte of an HEVC access unit.The VPS, SPS and PPS parameter sets, as defined in Rec. ITU-T H.265 | ISO/IEC 23008-2, referenced in this and all subsequent HEVC access units in the HEVC video sequence shall be provided after this access point in the byte stream a

38、nd prior to their activation. In the paragraph specifying the elementary_stream_priority_indicator, add: In the case of HEVC video streams or HEVC temporal video sub-bitstreams or HEVC temporal video subsets, this field may be set to 1 only if the payload contains one or more bytes from a slice with

39、 slice_type set to 2. A value of 0 indicates that the payload has the same priority as all other packets which do not have this bit set to 1. 6) Clause 2.4.3.7In Table 2-22, replace the following line: 1110 xxxx Rec. ITU-T H.262 | ISO/IEC 13818-2, ISO/IEC 11172-2, ISO/IEC 14496-2 or Rec. ITU-T H.264

40、 | ISO/IEC 14496-10 video stream number xxxx with: 1110 xxxx Rec. ITU-T H.262 | ISO/IEC 13818-2, ISO/IEC 11172-2, ISO/IEC 14496-2, Rec. ITU-T H.264 | ISO/IEC 14496-10 or Rec. ITU-T H.265 | ISO/IEC 23008-2 video stream number xxxx At the end of the clause specifying the PTS (presentation time stamp),

41、 add: For HEVC video streams, HEVC temporal video sub-bitstreams and HEVC temporal video subsets, if a PTS is present in the PES packet header, it shall refer to the first HEVC access unit that commences in this PES packet. To achieve consistency between the STD model and the HRD model defined in An

42、nex C of Rec. ITU-T H.265 | ISO/IEC 23008-2, for each HEVC access unit the PTS value in the STD shall, within the accuracy of their respective clocks, indicate the same instant in time as the nominal DPB output time in the HRD, as defined in Annex C of Rec. ITU-T H.265 | ISO/IEC 23008-2. At the end

43、of the clause specifying the DTS (decoding time stamp), add: For HEVC video streams, HEVC temporal video sub-bitstreams and HEVC temporal video subsets, if a DTS is present in the PES packet header, it shall refer to the first HEVC access unit that commences in this PES packet. To achieve consistenc

44、y between the STD model and the HRD model defined in Annex C of Rec. ITU-T H.265 | ISO/IEC 23008-2, for each HEVC access unit the DTS value in the STD shall, within the accuracy of their respective clocks, indicate the same instant in time as the nominal CPB removal time in the HRD, as defined in An

45、nex C of Rec. ITU-T H.265 | ISO/IEC 23008-2. 7) Clause 2.4.4.9In Table 2-34, Stream type assignments, replace the following line: 0x24-0x7E Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Reserved with: 0x24 HEVC video stream or an HEVC temporal video sub-bitstream 0x25 HEVC temporal video subset of an HEVC vi

46、deo stream conforming to one or more profiles defined in Annex A of Rec. ITU-T H.265 | ISO/IEC 23008-2 0x26-0x7E Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Reserved Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.3:2014 (E) 4 Rec. ITU-T H.222.0 (2012)/Amd.3 (01/2014) 8) Clause

47、 2.6.1Replace Table 2-45 with: Table 2-45 Program and program element descriptors descriptor_tag TS PS Identification 0 n/a n/a Reserved 1 n/a X Forbidden 2 X X video_stream_descriptor 3 X X audio_stream_descriptor 4 X X hierarchy_descriptor 5 X X registration_descriptor 6 X X data_stream_alignment_

48、descriptor 7 X X target_background_grid_descriptor 8 X X video_window_descriptor 9 X X CA_descriptor 10 X X ISO_639_language_descriptor 11 X X system_clock_descriptor 12 X X multiplex_buffer_utilization_descriptor 13 X X copyright_descriptor 14 X maximum_bitrate_descriptor 15 X X private_data_indica

49、tor_descriptor 16 X X smoothing_buffer_descriptor 17 X STD_descriptor 18 X X IBP_descriptor 19-26 X Defined in ISO/IEC 13818-6 27 X X MPEG-4_video_descriptor 28 X X MPEG-4_audio_descriptor 29 X X IOD_descriptor 30 X SL_descriptor 31 X X FMC_descriptor 32 X X external_ES_ID_descriptor 33 X X MuxCode_descriptor 34 X X FmxBufferSize_descriptor 35 X multiplexBuffer_descriptor 36 X X content_labeling_descriptor 37 X X metadata_pointer_descriptor 38 X X metadata_descriptor 39 X X metadata_STD_descriptor 40 X X AVC v