CAN CSA-ISO IEC 10746-1-2013 Information technology - Open Distributed Processing - Reference model Overview.pdf

《CAN CSA-ISO IEC 10746-1-2013 Information technology - Open Distributed Processing - Reference model Overview.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 10746-1-2013 Information technology - Open Distributed Processing - Reference model Overview.pdf（94页珍藏版）》请在麦多课文档分享上搜索。

1、Information technology Open Distributed Processing Reference model: OverviewCAN/CSA-ISO/IEC 10746-1:13(ISO/IEC 10746-1:1998, IDT)National Standard of CanadaNOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develop

2、s standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rule

3、s to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitat

4、ion, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information publish

5、ed in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIAB

6、LE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT

7、(INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Gr

8、oup is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and app

9、ly its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, no

10、r does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licens

11、ee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for

12、patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or

13、disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible fo

14、r identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial

15、 use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC ref

16、lects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject

17、in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from

18、 the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intend

19、ed primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”TMA trade-mark of the Canadian St

20、andards Association, operating as “CSA Group”National Standard of CanadaPublished in January 2013 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caApproved byStand

21、ards Council of CanadaCAN/CSA-ISO/IEC 10746-1:13Information technology Open Distributed Processing Reference model: OverviewPrepared by InternationalOrganizationforStandardization/ International Electrotechnical CommissionReviewed byCAN/CSA-ISO/IEC 10746-1:13Information technology Open DistributedPr

22、ocessing Reference model: OverviewCSA/4 2012 CSA Group January 2013CAN/CSA-ISO/IEC 10746-1:13Information technology Open Distributed Processing Reference model: OverviewCSA PrefaceStandards development within the Information Technology sector is harmonized with international standards development. T

23、hrough the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the C

24、anadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).This International Standard was reviewed by the TCIT under the jurisdiction of the Strategic St

25、eering Committee on Information Technology and deemed acceptable for use in Canada. From time to time, ISO/IEC may publish addenda, corrigenda, etc. The TCIT will review these documents for approval and publication. For a listing, refer to the Current Standards Activities page at standardsactivities

26、.csa.ca. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada. 2013 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever witho

27、ut the prior permission of thepublisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCSA Gr

28、oup5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000http:/csa.caTo purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.This Standard is subject to periodic review, and suggesti

29、ons for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure num

30、ber;(c) wording of the proposed change; and(d) rationale for the change.B CReference numberISO/IEC 10746-1:1998(E)INTERNATIONALSTANDARDISO/IEC10746-1First edition1998-12-15Information technology Open DistributedProcessing Reference model: OverviewTechnologies de linformation Traitement rparti ouvert

31、 Modle derfrence: PrsentationISO/IEC 10746-1 : 1998 (E) ISO/IEC 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing fro

32、m the publisher.ISO/IEC Copyright Office Case postale 56 CH-1211 Genve 20 SwitzerlandiiContentsPage1 Scope and field of application 12 Normative references 12.1 Identical Recommendations | International Standards . 12.2 Paired Recommendations | International Standards equivalent in technical content

33、 . 22.3 International Standards 23 Definitions 23.1 Definitions in this Recommendation | International Standard 23.2 Definitions from other Recommendations | International Standards . 24 Abbreviations 65 Conventions 76 ODP standardization. 76.1 Objectives and motivation. 76.2 Realization. 86.2.1 Obj

34、ect modelling . 86.2.2 Viewpoint specifications .96.2.3 Distribution transparency. 96.2.4 Conformance . 96.3 Standards . 106.3.1 The Reference Model 106.3.2 Specific standards 107 Foundations 107.1 Basic modelling concepts 117.1.1 Objects. 117.1.2 Interfaces and interaction points 117.1.3 Behaviour

35、and state . 127.2 Specification concepts. 127.2.1 Composition/Decomposition . 127.2.2 Behavioural compatibility . 137.2.3 Type and class . 137.2.4 Templates 137.2.5 Roles 137.2.6 Base classes and derived classes 147.3 Structuring concepts 147.3.1 Groups and domains 147.3.2 Naming 147.3.3 Contract .

36、147.3.4 Liaison and binding . 158 Architecture 158.1 Architectural framework 158.1.1 Viewpoints. 158.1.2 Distribution transparencies 168.2 Enterprise language . 17CAN/CSA-ISO/IEC 10746-1:13 ISO/IECISO/IEC 10746-1 : 1998 (E)iii8.3 Information language. 198.4 Computational language 208.4.1 Computation

37、al interfaces.218.4.2 Binding model . 218.4.3 Typing and subtyping for computational interfaces. 238.4.4 Portability 248.5 Engineering language 248.5.1 Clusters, capsules and nodes 258.5.2 Channels 258.5.3 Interface references . 288.5.4 Binding 298.5.5 Channel establishment . 298.5.6 Management inte

38、rfaces308.5.7 Interceptors 308.5.8 Conformance points. 328.6 Technology language. 328.7 Consistency between viewpoints . 328.7.1 Enterprise viewpoint consistency with other viewpoints . 348.7.2 Correspondences between computational and engineering specifications. 358.8 ODP functions . 378.8.1 Manage

39、ment functions.388.8.2 Coordination functions 388.8.3 Repository functions 398.8.4 Security functions 398.9 ODP distribution transparencies 408.9.1 Access transparency 408.9.2 Failure transparency 408.9.3 Location transparency 408.9.4 Migration transparency 408.9.5 Persistence transparency 418.9.6 R

40、elocation transparency 418.9.7 Replication transparency .418.9.8 Transaction transparency.419 Conformance assessment 419.1 Conformance assessment and the development process 419.2 Conformance assessment: Relevant relationships 429.3 Conformance points and related concepts . 429.4 ODP conformance spe

41、cifications 439.4.1 Level of abstraction . 439.4.2 Use of multiple reference points 439.5 Conformance implications of viewpoint languages . 449.6 Conformance assessment activities 4410 Management of ODP systems. 4410.1 Management domains 4510.2 Management policy . 4510.3 Modelling management structu

42、res. 4511 The use of standards in ODP systems. 4611.1 Enterprise viewpoint 4611.1.1 Enterprise specification . 4611.1.2 The application of standards4711.2 Information viewpoint . 4711.2.1 Information specification. 4711.2.2 The application of standards4811.3 Computational viewpoint. 4811.3.1 Computa

43、tional specification 4811.3.2 The application of standards4911.4 Engineering viewpoint. 49CAN/CSA-ISO/IEC 10746-1:13ISO/IEC 10746-1 : 1998 (E) ISO/IECiv11.4.1 Engineering specification 4911.4.2 The application of standards5111.5 Technology viewpoint . 5111.5.1 Technology specification. 5111.5.2 The

44、application of standards5212 Examples of ODP specifications. 5212.1 Multimedia Conferencing System . 5312.1.1 Introduction . 5312.1.2 Enterprise specification . 5412.1.3 Information specification. 5512.1.4 Computational specification 5512.1.5 Engineering specification 5812.1.6 Technology specificati

45、on. 6012.2 Multiparty audio/video stream binding 6012.2.1 General description 6012.2.2 Enterprise specification . 6112.2.3 Information specification. 6212.2.4 Computational specification 6412.2.5 Engineering specification 6712.2.6 Technology specification. 6812.3 A management example Metric Object 6

46、812.3.1 Enterprise specification . 6912.3.2 Information specification. 7012.3.3 Computational specification 7112.4 Database example 7212.4.1 Enterprise specification . 7212.4.2 Information specification. 7212.4.3 Computational specification 72Annex A Bibliography . 76CAN/CSA-ISO/IEC 10746-1:13 ISO/I

47、ECISO/IEC 10746-1 : 1998 (E)vForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) formthe specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in thedevelopment of Internationa

48、l Standards through technical committees established by the respective organization to dealwith particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest.Other international organizations, governmental and non-governmental, in liaison with ISO

49、 and IEC, also take part in thework.In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. DraftInternational Standards adopted by the joint technical committee are circulated to national bodies for voting. Publicationas an International Standard requires approval by at least 75 % of the national bo