CAN CSA-ISO 1996-2-2005 Acoustics Description and measurement of environmental noise Part 2 Acquisition of data pertinent to land use (First Edition).pdf

《CAN CSA-ISO 1996-2-2005 Acoustics Description and measurement of environmental noise Part 2 Acquisition of data pertinent to land use (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO 1996-2-2005 Acoustics Description and measurement of environmental noise Part 2 Acquisition of data pertinent to land use (First Edition).pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of CanadaCAN/CSA-ISO 1996-2:05(ISO 1996-2:1987)International Standard ISO 1996-2:1987 (first edition, 1987-04-15), including Amendment 1:1998, hasbeen adopted without modification (IDT) as CSA Standard CAN/CSA-ISO 1996-2:05, which has beenapproved as a National Standard of Canada b

2、y the Standards Council of Canada.ISBN 1-55397-823-4 February 2005Reference numberISO 1996-2:1987(E)Acoustics Description and measurementof environmental noise Part 2:Acquisition of data pertinent to land useAcoustique Caractrisation et mesurage du bruit de lenvironnement Partie 2 : Saisie des donne

3、s pertinentes pour lutilisation des solsThe Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, vol

4、untary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widel

5、y by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs st

6、andards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chos

7、en. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Asso

8、ciation regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association

9、has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to m

10、eet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, a

11、utonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety,

12、 and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which r

13、eflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It nor

14、mally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not r

15、efer to the technical content of the standard; this remains the continuing responsibility of the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic re

16、view; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Can

17、ada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards Associa

18、tionCAN/CSA-ISO 1996-2:05Acoustics Description and measurement of environmentalnoise Part 2: Acquisition of data pertinent to land useFebruary 2005 Canadian Standards Association CSA/1CAN/CSA-ISO 1996-2:05Acoustics Description and measurement of environmental noise Part 2: Acquisition of data pertin

19、ent to land useCSA PrefaceThis is the first edition of CAN/CSA-ISO 1996-2, Acoustics Description and measurement of environmental noise Part 2: Acquisition of data pertinent to land use, which is an adoption without modification of the identically titled ISO (International Organization for Standardi

20、zation) Standard 1996-2 (first edition, 1987-04-15), including Amendment 1:1998.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Acoustics and Noise Control, under the jurisdiction of the Strategic Steering Committee on the Environment, and has been formally approve

21、d by the Technical Committee. A list of the members of the Technical Committee is available upon request. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.February 2005 Canadian Standards Association 2005All rights reserved. No part of this publicat

22、ion may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National S

23、tandard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044www.csa.caINTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXP,YHAPOAH

24、Afl OPTAHM3AMfl l-l0 CTAHAPTM3AMM Acoustics - Description and measurement of environmental noise - Part 2 : Acquisition of data pertinent to land use Acoustique - Caracthsation et mesurage du bruit de lenvironnement - Partie 2 : Saisie des donnhes pertinen tes pour lutiiisation des sols 1996-2 First

25、 edition 1987-04-15 Reference number ISO 1996-2: 1987 (E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committe

26、es. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopte

27、d by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 1996-2 wa

28、s prepared by Technical Committee ISO/TC 43, A coustics. ISO 1996-2 together with ISO 1996-1 : 1982 and ISO 1996-3 : 1987 cancel and replace ISO Recommendation R 1996 : 1971, of which they constitute a technical revision. Users should note that all International Standards undergo revision from time

29、to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1987 Printed in Switzerland INTERNATIONAL STANDARD ISO 1996-2: 1987 (E) Acoustics - Description and measurement of envir

30、o.nmentaI noise - . Part 2 : Acquisition of data pertinent to land use 0 Introduction 0.1 ISO 1996 comprises the following three Parts : Part 1 : Basic quantities and procedures. Part 2 : Acquisition of data pertinent to land use. Part 3 : Application to noise Iimits. 0.2 This part of ISO 1996 descr

31、ibes methods to be used for measuring and describing environmental noise relevant to general land use. The use of different measuring methods, such as continuous integration, sampling techniques and measurements under selected meteorological coriditions, is considered. Calculation methods or scale m

32、odel investigations may also be used. This part of ISO 1996 does not deal in detail with calculation methods. If, however, such methods are used to obtain data pertinent to land use, it is important that the noise be described in a way that is consistent with the requirements of this part of ISO 199

33、6. The purpose of this part of ISO 1996 is to provide methods for the acquisition of data for describing environmental noise. Using these data as a basis, authorities may establish a System for selecting the appropriate land use, as far as levels of noise are concerned, for a specified area, or the

34、sources of noise - existing or planned 7 which are acceptable with respect to land use, existing or planned. This part of ISO 1996 does not give guidance on the estimation of the Overall uncertainty of the results, but this shoutd be considered in each specific case, if possible. lt does not specify

35、 noise limits. 1 Scope and field of application This part of ISO 1996 describes methods for the acquisition of data which provide descriptors that enable a) a description of the environmental noise in a specified area of land to be made in a uniform way; b) the compatibility of any land use activity

36、 or projected activity to be assessed with respect to.existing or predicted noise. 2 References ISO 1996-1, Acoustics - Description and measurement of environmental noise - Part 7 : Basic quantities and procedures. 1 ) IEC Publication 651, Sound level meters. I EC Pu blication 804, lntegating-averag

37、ing Sound level meters. 3 Def initions For the purposes of this part of ISQ 1996, the definitions given in ISO 1996-1 together with the following definitions apply. 3.1 Cand use : An existing or intended use of a delineated area of land. 3.2 noise zone : Region where the long-term average rating lev

38、el lies between two specified levels such as, for example, between 65 and 70 d. The noise zone number for this example is 65-70 dB. 3.3 receiver : Person or group of persons who are or who are expected to be exposed to environmentat noise. 4 Acquisition of data . For the purpose of acquisition of da

39、ta relevant to land use, the following basic information is required : a) geographicat description of the area under consider- ation; 1) Cross-references to specific clauses, sub-clauses, etc. in ISO 1996-1 apply to the first edition published in 1982. ISO 1996-2: 1987 (EI b) description of the main

40、 characteristics of the sources of noise pertinent to this area; 6 dB. If the components are only just detectable by the observer and demonstrated by narrow-band analysis, an adjustment of 2 to 3 dB may be appropriate. c) description of the Situation of the receiver, such as location, occupation, us

41、e and features of the immediate surroundings. 4.1.4 Impulse adjustment, KZ If impulse is an essential characteristic of the Sound within a specified time intervat, an adjustment may be applied, for this time interval, to the measured equivalent continuous A-weighted Sound pressure level. The value o

42、f this adjustment shall be stated. NOTE - If possible, information on prevailing meteorological conditions in the area under consideration should be given, preferably as statistical information on wind Speed and direction, on precipitation and temperature (including the occurrence of temperature inv

43、ersions) for a typical time interval, such as a year or any other suitable time interval. NOTES 1 A method of describing the impulse characteristic of the Sound within the specified time interval is to measure the differente between the A-weighted Sound pressure level, determined with time-weightinq

44、 characteristic I averaged over the same time interval, and LAeq r The Sound pressure levels should be determined simultaneousl;. The Character of the noise may be further illustrated by determining the peak level and the number of impulses during a specified time interval. 4.1 Acoustical data 4.1.1

45、 General Basic acoustical data are equivalent continuous A-weighted Sound pressure levels determined over the reference time intervals and rating levels for the same reference time intervals with additional information on the characteristics of the noise, if required. 2 For large-amplitude noise, su

46、ch as the noise generated by sonic booms, mining or quarry blasts, measurements with C-weighting are used in some countries to determine the rating level. 4.1.2 Rating level 4.2 Meteorological adjustment The rating level shall be determined over reference time intervals related to the characteristic

47、s of the source(s) and receiverk). To extrapolate from a value of the equivalent continuous A-weighted Sound pressure levei measured under selected meteorological conditions to a long-term value, a meteoro- logical adjustment may be used (sec 5.3 in ISO 1996-1). The rating level, (LA, given by the f

48、ormula Sound N LAeq,U- = lo b c 1 o”e 1 (j. Aeq, 7-h i=l 1 4i is a tone interval; adjustment applica ble to the ith reference time where K2,- is an impulse adjustment reference time interval. applica ble to the ith N is the number of samples of the reference time interval; NOTE - If the tone or impu

49、lse characteristics are present for only a part of the reference time intetval, the values of Kl and K2 may be adjusted to take account of the duration. (L 1. Aeq,T I is the equivalent continuous A-weighted Sound pressure level in the ith Sample, in decibels. 4.4 Long-term average rating level 4.1.3 Tone adjustment, K, Jf tonal components are essential characteristics of the Sound within a specified time interval, an adjustment may be applied, for that time interval, to the measured equivalent continuous A-weighted Sound pressure levei. The value of