CAN CSA-C22 2 NO 745-2-31-1995 Safety of portable electric tools - Part 2 Particular requirements for diamond core drills (First Edition).pdf

《CAN CSA-C22 2 NO 745-2-31-1995 Safety of portable electric tools - Part 2 Particular requirements for diamond core drills (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 745-2-31-1995 Safety of portable electric tools - Part 2 Particular requirements for diamond core drills (First Edition).pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CSA-C22.2 No. 745-2-31-95A National Standard of Canada(reaffirmed 2014)Safety of portable electric tools Part 2: Particular requirements for diamond core drillsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards dev

2、elopment process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus,

3、 it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concern

4、ing this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no repre

5、sentations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DA

6、MAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY O

7、F LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional

8、 or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no res

9、ponsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance wi

10、th the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are pr

11、otected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized

12、 use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licenc

13、e or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights.

14、Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is autho

15、rized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable indi

16、viduals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is c

17、apable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The res

18、ponsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is st

19、ated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Canadian Standards Association CAN/CSA-C22.2 No. 745-2-31 First Edition Underw

20、riters Laboratories Inc. UL 745-2-31 First Edition Particular Requirements for Diamond Core Drills March 23, 1995 Approved by Standards Council of Canada Commitment for Amendments This Standard is issued jointly by Canadian Standards Association and Underwriters Laboratories Incorporated. Amendments

21、 to this Standard will be made only after processing according to the Standards writing procedures by both Canadian Standards Association and Underwriters Laboratories Incorporated. ISSN 0317-5669 ISBN 1-55989-777-5 Copyright 1995 Canadian Standards Copyright 1995 Underwriters Association Laboratori

22、es Incorporated Inc. All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. March 23, 1995 CSA-C22.2 No. 745-2-31 UL 745-2-31 3 Contents Preface 5 Foreword (CSA) 7 Foreword (UL) 9

23、11 2 Definitions 11 3. General requirement 11 4. General notes on tests 11 5 Rating 11 8:c.ESlfkatk . .M.atk.frS 8 9:EStfr9 iOD1IIIWa1d.cUfrreInt 1:1HEitii19 16. .EidUranc 17. Abnormal operation 18. Mectianilhzard 1tMhiaL strength 20. Construction 21. Internal wirIng 22. bmpohents 11 12 12 12 12 12

24、12 12 12 12 12 12 12 13 13 13 13 4 CSA-C22.2 No. 745-2-31 UL 745231 March 23, 1995 fl. Supply connection and external flexible cbleS.and cords 13 24. Terminals for external conductors 13 25. Provision for earthing 13 26:Screws and connections 13 27. creepaeda es,.i:deara IQS and disti4ces through in

25、sUlation 13 28. Resistance to heM, fire indfrbking 13 29. ResiStince to rusting. 13 3O.Tests by Manufacturers 14 31.: instructions 14 Appendix A Thermal cut.outs and overload releases 15 Apndix: B Electronic circuits 15 AppendfrlC Construction of safety isolating transformers 15 Appendix:D t:Measure

26、ment of creepage distances and cf earances 15 Appendix.E Rfernce. standards 15 Appendix F Attachments and accessones 15 Appendix C Seq ueh.l4i.tests 15 Appendix 11 Translations 15 March 23, 1995 CSA-C22.2 No. 745-2-31 UL 745-2-31 5 Preface This is the common CSA and UL Standard for portable electric

27、 diamond core drills. It is the first edition of CSA Standard CANICSA-C22.2 No. 745-2-31, Safety of portable electric tools Part 2: Particular requirements for diamond core drills and UL 745-2-31, Safety of portable electric tools Part. 2: Particular requirements for diamond core drills. It is writt

28、en in SI (metric) units. It will coexist with the CSA Standard CANICSA-C22.2 No. 71.1 for the period given in CSA Certification Notice Electrical Tools No. 6. This Standard was prepared by the Canadian Standards Association and Underwriters Laboratories Inc. It contains particular requirements and i

29、s intended to be used in conjunction with the general Standard CAN/CSA-C22.2 No. 745-1/UL 745-1. Where a clause of the general Standard (CAN/CSA-C22.2 No. 745-1/UL 745-1) is not mentioned in this Standard, the clause applies as far as is reasonable. Where this particular Standard states addition, mo

30、dification, or replacement, the relevant requirement, test specification, or explanatory matter in the general Standard (CAN/CSA-C22.2 No. 745-1/UL 745-1) should be adapted accordingly. If the functions of a tool are covered by dferent particular Standards, the relevant particular Standard is applie

31、d to each function separately, so far as is reasonable. If applicable, the influence of one function on the other is taken into account. This Standard was reviewed by the CSA Subcommittee on Portable Electric Tools of the Technical Committee on Consumer and Commercial Products under the jurisdiction

32、 of the Standards Steering Committee on the Canadian Electrical Code, Part Il, and was formally approved by these Committees. This Standard was processed and reviewed in accordance with the method of development, revision, and implementation of UL Standards for safety. This Standard has been approve

33、d by the Standards Council of Canada as a National Standard of Canada and it will be submitted to the American National Standards Institute (ANSI) for publication as an American National Standard. March 23, 1995 UL Effective Date As of June 1, 2007, all products Listed or Recognized by UL must compl

34、y with the requirements in this Standard. Between June 1, 2002 and June 1, 2007, new product submittals to UL must be evaluated under all requirements in this standard. Between March 23, 1995 and June 1, 2002, new product submittals to UL may be evaluated under all requirements in this Standard or,

35、it requested in writing, evaluated under presently effective requirements only. The presently effective requirements are contained in the seventh edition of UL 45. CSA Effective Date The effective date for CSA will be announced through CSA Certification Notice Electrical Tools No. 6. Note: Although

36、the intended primaly application of this Standard is stated in its Scope, ft is important to note that ft remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. 6 CSA-C22.2 No. 745-2-31 UL 745-2-31 March 23, 1995 March 23, 1995 CSA-C22.2 No. 74

37、5-2-31 IJL 745-2-31 7 Foreword (CSA) Certification organizations, as accredited by the Standards Council of Canada, have their own criteria procedures for certification services. The following paragraphs define CSA Certification policies. The Canadian Standards Association provides certification ser

38、vices for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of qua

39、lity, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is d

40、esired by producers, consumers or other interests. In performing its functions in accordance with its objectives, CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement

41、 given with due consideration to the necessity limitations of practical operation and state of the art at the time the Standard is processed. Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the featu

42、re or difference is found acceptable utilizing appropriate CSA Certification Division Operating Procedures. Products which comply with this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be cer

43、tifiable if they are discovered to contravene applicable Federal laws or regulations. Testing techniques, test procedures and instrumentation frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. In addition to markin

44、gs specified in the Standard the CSA Certification and Testing Division may require special cautions, markings and instructions that are not specified by the Standard. Some tests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for

45、 any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility or personnel for in connection with the test is furnished by the manufacturer or the Ass

46、ociation. Manufacturers should note that, in the event of the failure of the CSA Certification and Testing Division to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadia

47、n Standards Association. If this Standard is to be used in obtaining CSA Certification please remember, when making application for certification, to request all current Amendments, Bulletins, Notices and Technical Information Letters that may be applicable and for which there may be a nominal charg

48、e. For such information or for further information concerning details about CSA Certification please address your inquiry to the Applications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1R3. March 23, 1995 CSA-C22.2 No. 745-2-31 UL 745-2

49、-31 9 Foreword (UL) A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field experience, a