BS ISO 4724-2004 Oil of cedarwood Virginian type (Juniperus virginiana L )《弗吉尼亚柏木(北美圆柏Juniperus virginiana L )油》.pdf

《BS ISO 4724-2004 Oil of cedarwood Virginian type (Juniperus virginiana L )《弗吉尼亚柏木(北美圆柏Juniperus virginiana L )油》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 4724-2004 Oil of cedarwood Virginian type (Juniperus virginiana L )《弗吉尼亚柏木(北美圆柏Juniperus virginiana L )油》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 4724:2004 Oil of cedarwood, Virginian type (Juniperus virginiana L.) ICS 71.100.60 BS ISO 4724:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2004 BSI 30 June 2004 ISBN 0 580 43989 5 National foreword Thi

2、s British Standard reproduces verbatim ISO 4724:2004 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AW/54, Essential Oils, which has the responsibility to: A list of organizations represented on this committee can be obtain

3、ed on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Ele

4、ctronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to

5、 understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document co

6、mprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Co

7、mments Reference number ISO 4724:2004(E) OSI 4002INTERNATIONAL STANDARD ISO 4724 Second edition 2004-06-01 Oil of cedarwood, Virginian (Juniperus virginiana L.) Huile essentielle de bois de cdre, type Virginie (Juniperus virginiana L.)BSISO4724:2004IS:4274 O4002(E) DPlcsid Fremia ihTs PDF file may c

8、tnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnops

9、iiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion

10、marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto ssw

11、rehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypot

12、hg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrBSISO4724:2004IS:4274 O4002(E) I SO 4002 All irthgs ersedevr iiiForeword ISO (the International Organization fo

13、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

14、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Internati

15、onal Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication

16、as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

17、ISO 4724 was prepared by Technical Committee ISO/TC 54, Essential oils. This second edition cancels and replaces the first edition (ISO 4724:1984), which has been technically revised. BSISO4724:2004INTENRATIONAL TSANDADR IS:4274 O4002(E)I SO 4002 All irthgs ersedevr 1Oil of cedarwood, Virginian (Jun

18、iperus virginiana L.) 1 Scope This International Standard specifies certain characteristics of the oil of cedarwood, Virginian (Juniperus virginiana L.), in order to facilitate assessment of its quality. 2 Normative references The following referenced documents are indispen- sable for the applicatio

19、n of this document. For dated references, only the edition cited applies. For un- dated references, the latest edition of the referenced document (including any amendments) applies. ISO/TR 210, Essential oils General rules for packaging, conditioning and storage ISO/TR 211, Essential oils General ru

20、les for la- belling and marking of containers ISO 212, Essential oils Sampling ISO 279, Essential oils Determination of relative density at 20 C Reference method ISO 280, Essential oils Determination of refrac- tive index ISO 592, Essential oils Determination of optical rotation ISO 875, Essential o

21、ils Evaluation of miscibility in ethanol ISO 11024-1, Essential oils General guidance on chromatographic profiles Part 1: Preparation of chromatographic profiles for presentation in stan- dards ISO 11024-2, Essential oils General guidance on chromatographic profiles Part 2: Utilization of chromatogr

22、aphic profiles of samples of essential oils 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 oil of cedarwood, Virginian essential oil obtained by steam distillation of the wood of Juniperus virginiana L., of the Cupressaceae family, growing i

23、n the United States of America from the South Eastern part of Virginia to Eastern Texas NOTE For information on the CAS number, see ISO/TR 21092. 4 Requirements 4.1 Appearance Slightly viscous liquid, sometimes containing crystals. 4.2 Colour Almost colourless to pale yellow. 4.3 Odour Characteristi

24、c, warm and woody. 4.4 Relative density at 20 C, 20 20 dMinimum: 0,941 0 Maximum: 0,965 0 4.5 Refractive index at 20 C Minimum: 1,501 0 Maximum: 1,510 0 4.6 Optical rotation at 20 C Between 36 and 16. BSISO4724:2004IS:4274 O4002(E) 2 I SO 4002 All irthgs ersedevr4.7 Miscibility in ethanol, 95% (volu

25、me fraction), at 20 C It shall not be necessary to use more than 5 volumes of ethanol, 95 % (volume fraction), to obtain a clear solution with 1 volume of essential oil. 4.8 Chromatographic profile Analysis of the essential oil shall be carried out by gas chromatography. In the chromatogram obtained

26、, the representative and characteristic components shown in Table 1 shall be identified. The proportions of these components, indicated by the integrator, shall be as shown in Table 1. This constitutes the chromatographic profile of the essential oil. Table 1 Chromatographic profile Component Minimu

27、m % Maximum % -Cedrene + -funebrene 20 35 -Cedrene + -caryophyllene 4 8 Thujopsene 10 25 Cuparene 1,5 7 Cedrol 16 25 Widdrol 2 5 NOTE 1 The chromatographic profile is normative, contrary to typical chromatograms given for information in Annex A. NOTE 2 Cedrol and widdrol only appear as individual pe

28、aks in the chromatogram taken on a polar column. 4.9 Flashpoint Information on the flashpoint is given in Annex B. 5 Sampling See ISO 212. Minimum volume of test sample: 25 ml. NOTE This volume allows each of the tests specified in this International Standard to be carried out at least once. 6 Test

29、methods 6.1 Relative density at 20 C, 20 20 dSee ISO 279. 6.2 Refractive index at 20 C See ISO 280. 6.3 Optical rotation at 20 C See ISO 592. 6.4 Miscibility in ethanol, 95% (volume fraction), at 20 C See ISO 875. 6.5 Chromatographic profile See ISO 11024-1 and ISO 11024-2. 7 Packaging, labelling, m

30、arking and storage See ISO/TR 210 and ISO/TR 211. BSISO4724:2004IS:4274 O4002(E) I SO 4002 All irthgs ersedevr 3Annex A (informative) Typical chromatograms of the analysis by gas chromatography of the essential oil of cedarwood, Virginian (Juniperus virginiana L.) Peak identification 1 -Cedrene + -f

31、unebrene 2 -Cedrene + -caryophyllene 3 Thujopsene 4 Cuparene 5 Cedrol 6 Widdrol Operating conditions Column: capillary; length 60 m; internal diameter 0,20 mm Stationary phase: poly(5 % diphenyl/95 % dimethyl siloxane) (SP-5 ) Film thickness: 0,20 m Oven temperature: temperature programming from 100

32、 C to 200 C at a rate of 3 C/min Injector temperature: 250 C Detector temperature: 250 C Detector: flame ionization type Carrier gas: helium Volume injected: 0,1 l Carrier gas flow rate: 30 ml/min Split ratio: 1/100 Figure A.1 Typical chromatogram taken on an apolar column BSISO4724:2004IS:4274 O400

33、2(E) 4 I SO 4002 All irthgs ersedevrPeak identification 1 -Cedrene + -funebrene 2 -Cedrene + -caryophyllene 3 Thujopsene 4 Cuparene 5 Cedrol 6 Widdrol Operating conditions Column: capillary; length 60 m; internal diameter 0,20 mm Stationary phase: poly(ethylene glycol) (Carbowax ) Film thickness: 0,

34、20 m Oven temperature: temperature programming from 100 C to 200 C at a rate of 3 C/min Injector temperature: 250 C Detector temperature: 250 C Detector: flame ionization type Carrier gas: helium Volume injected: 0,1 l Carrier gas flow rate: 30 ml/min Split ratio: 1/100 Figure A.2 Typical chromatogr

35、am taken on a polar column BSISO4724:2004IS:4274 O4002(E) I SO 4002 All irthgs ersedevr 5Annex B (informative) Flashpoint B.1 General information For safety reasons, transport companies, insurance companies, and people in charge of safety services require information on the flashpoints of essential

36、oils, which in most cases are flammable products. A comparative study on the relevant methods of analysis (see ISO/TR 11018) concluded that it was difficult to recommend a single apparatus for stan- dardization purposes, given that: there is wide variation in the chemical composi- tion of essential

37、oils; the volume of the sample needed for certain requirements would be too costly for high- priced essential oils; as there are several different types of equip- ment which can be used for the determination, users cannot be expected to use one specified type only. Consequently, it was decided to gi

38、ve a mean value for the flashpoint in an informative annex to each International Standard in order to meet the require- ments of the interested parties. The equipment with which this value was obtained should be specified. For further information, see ISO/TR 11018. B.2 Flashpoint of the essential oi

39、l of cedarwood, Virginian The mean value is +93 C. NOTE Obtained with “Setaflash“ equipment. BSISO4724:2004IS:4274 O4002(E) 6 I SO 4002 All irthgs ersedevrBibliography 1 ISO/TR 11018:1997, Essential oils General guidance on the determination of flashpoint 2 ISO/TR 21092:2004, Essential oils Characte

40、rization BSISO4724:2004blankBS ISO 4724:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated

41、by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone findi

42、ng an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service calle

43、d PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standar

44、ds are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of

45、 information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111

46、. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44

47、(0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also

48、 holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, reco

49、rding or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then th