BS ISO 15903-2002 Soil quality - Format for recording soil and site information《土壤质量 记录土壤和现场信息的格式》.pdf

《BS ISO 15903-2002 Soil quality - Format for recording soil and site information《土壤质量 记录土壤和现场信息的格式》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 15903-2002 Soil quality - Format for recording soil and site information《土壤质量 记录土壤和现场信息的格式》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 15903:2002 Soil quality Format for recording soil and site information ICS 13.080.01 BS ISO 15903:2002 This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the

2、Standards Policy and Strategy Committee on 30 September 2002 BSI 30 September 2002 ISBN 0 580 40480 3 National foreword This British Standard reproduces verbatim ISO 15903:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee

3、 EH/4, Soil quality, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue un

4、der the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap

5、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;

6、 monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 5 and a back cover. The BSI copyright date displayed in this document indicates when t

7、he document was last issued. Amendments issued since publication Amd. No. Date CommentsINTERNATIONAL STANDARD ISO 15903 First edition 2002-09-01 Reference number ISO 15903:2002(E) Soil quality Format for recording soil and site information Qualit du sol Format denregistrement des donnes relatives au

8、x sols et aux sitesBSISO15903:2002BSISO15903:2002iiISO 09512002:3)E( ISO 2002 r llAithgs reservde iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normall

9、y carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the

10、work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical

11、 committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rig

12、hts. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 15903 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 1, Evaluation of criteria, terminology and codification. BSISO15903:2002iiiISO :30951(2002)E vi ISO 200

13、2 Ar llithgr seresvde Introduction In any system where soil data are handled, but particularly in determinations of soil quality and evaluations for soil protection or sustainable uses of soil, it is essential that reliable and compatible information is obtained and recorded. This information must e

14、nable the site to be clearly identified and located. The documentation should include information collected about the nature of the site at the time of the site investigation and the nature of sampling. Details on the sampling include the place, date and mode of sampling, the size of the sample, whe

15、ther single or composite and the storage and transportation conditions. In addition, details of the sample preparation and of the results of test methods undertaken on the samples should be recorded. Information should also be provided on the test methods used and their precision, as well as details

16、 of the laboratory undertaking the test methods together with information about the laboratorys accreditation and involvement in quality assurance schemes. BSISO15903:2002ivANRETNIITOTS LANDNADRA ISO 09512002:3)E( ISO 2002 r llAithgs reservde 1 Soil quality Format for recording soil and site informa

17、tion 1 Scope The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides instructions for correctly specifying the quantities and

18、 units used to express results of analyses, the methods used and their precision. This International Standard also provides information to allow unique referencing of the sample, in both field and laboratory contexts, in order to ensure the traceability of the results. 2 Normative references The fol

19、lowing normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Internation

20、al Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid Internatio

21、nal Standards. ISO 11074-1, Soil quality Vocabulary Part 1: Terms and definitions relating to the protection and pollution of the soil ISO 11074-2, Soil quality Vocabulary Part 2: Terms and definitions relating to sampling 3 Terms and definitions For the purposes of this International Standard, term

22、s and definitions given in ISO 11074-1 and ISO 11074-2 apply. 4P r e a m b l e Given the large amount of data which result from site investigation, sampling, analysis of physical, chemical and biological properties of the sample and in the future evaluation of the risks to particular targets or part

23、icular land uses, it is essential that these data be recorded systematically. This approach will generate the basis of a codified information system for soil quality investigations. These data are most appropriately stored in a Geographical Information System (GIS). 5 List of parameters 5.1 General

24、The range of parameters which can be recorded as a result of observations of on-site characteristics, on-site analysis and laboratory analysis of soil samples is large. It may be necessary to produce subsets of parameter listings, depending upon the hypotheses developed about the soils and sites and

25、 the questions to be answered by the analyses. There will be substantial differences in the content of the documentation, depending upon whether the data relate to preliminary or detailed investigations. The broad layout should however be similar, irrespective of the amount of detail reported. BSISO

26、15903:20021ISO :30951(2002)E 2 ISO 2002 Ar llithgr seresvde In addition to the presentation of factual information, there may be an additional interpretative report. In most cases, particularly where any risk assessment will be undertaken, an interpretative report is likely to be required. In some c

27、ases the report will also indicate why the selection of parameters for observation has been made. In broad terms, a codified information system for soil quality investigations will require the information given in 5.2 to 5.11. 5.2 Objectives of the investigation The reasons for the investigation, in

28、cluding information on the intended use of the site and whether the investigation is a preliminary investigation or a detailed investigation, shall be given. A full discussion and description of the hypotheses which have been formulated, should be included. This information may include, for example,

29、 conclusions relating to the presence or absence of (and the type and nature of) any contaminants, if the concern is with a potentially contaminated site. 5.3 General information The following general information shall be provided: a) site reference number or site name; b) location: national code (I

30、SO); administrative division; c) geographical references: coordinates and other relevant information for locating (map) and describing the area of the site; elevation; d) date and time of sampling or site observation; e) name and other details: the sampler or site observer as well as responsible per

31、son; the organization responsible for sampling or observing the site; the owner of the site. 5.4 Site details In describing the soil and site, ISO 11259 should be followed where appropriate. The following site details should be provided: a) surface relief features of the site; b) slope and appearanc

32、e of the site; c) signs of erosion and soil movement; d) climate at the site; e) weather conditions at the time of recording the site information and sampling; f) details about land use, including past and present uses of the site; g) current site plan, for example the presence of concrete or tarmac

33、 pathways, of buildings and remains of demolished buildings, vegetation, refuse, domestic pipelines and underground tanks and services; h) geology of the site; i) hydrology of the site, in particular the groundwater regime and fluctuations, soil water conditions, sea water incursions; BSISO15903:200

34、22ISO 09512002:3)E( ISO 2002 r llAithgs reservde 3 j) soil description: k) any other features and events which might influence the interpretation of the data gathered; l) details of sources of information which have been consulted (including references to background/source material). 5.5 Quantitativ

35、e on-site observations including additional and non-intrusive investigations Information such as strata logs or ground gas profiling and monitoring should be summarized, and where appropriate full information presented in annexes. Details and results of non-intrusive sampling procedures (for example

36、 ground- penetrating radar, magnetic surveys, electrical conductivity resistivity surveys, seismic refraction surveys, and infrared photography) should be presented. 5.6 List of parameters recorded on-site and analyses undertaken on site These might include site survey of elevation, measurements of

37、resistance, infiltration, soil temperature, soil gas sampling and analysis. 5.7 Details concerning the sample The following details concerning the sample shall be provided: a) exact geographic location of the sample; b) design of the sampling plan and location of the samples 1) ; c) safety precautio

38、ns taken 1) ; d) whether the sample is disturbed or undisturbed 1) ; e) tools used to obtain the samples 1) ; f) depth of sample, including upper and lower limits of the horizon/layer if the sample is taken as a representative sample of the layer; g) volume of sample; h) whether a single or composit

39、e sample; if composite, give the number and distribution of sampling points; i) moisture status of sample when collected (for further information, see ISO 11259); j) sample containers used (e.g. polyethylene buckets, wide-mouthed bottles, strong bags); k) labelling; once a sample is obtained, it sha

40、ll be clearly and uniquely labelled 1) ; l) once sampled, a “chain of custody” shall be established and fully documented. This is essential if the samples and analytical results are required for legal purposes; m) qualitative information about the samples, to reflect subjective observations, for exa

41、mple smell, pore distribution in undisturbed soil cores, colour or other observations. Categories might include: not detectable (below detection limit); detectable; readily detectable. 5.8 Transport and storage of samples Full details of transport and sample storage conditions shall be recorded (tem

42、perature, light, humidity, type of bottle, duration of transport, etc.). 1) For further information, see the relevant parts of ISO 10381. BSISO15903:20023ISO :30951(2002)E 4 ISO 2002 Ar llithgr seresvde 5.9 List of laboratory analyses required and appropriate analytical procedures to be used Full sp

43、ecification of methods, including references to the relevant International Standards. 5.10 Laboratory reception and pretreatment The following elements shall be provided: a) name and address of laboratory; b) laboratory number; c) pretreatment 1) : sample drying; grinding and sieving; other pretreat

44、ment. 5.11 Quantitative laboratory information about the samples The following elements shall be propvided: a) results of analysis; b) details of methods used (references to the appropriate International Standards); c) precision of methods; d) limits of detection; e) units used to report results. BS

45、ISO15903:20024ISO 09512002:3)E( ISO 2002 r llAithgs reservde 5 Bibliography 1 ISO 10381 (all parts), Soil quality Sampling 1) 2 ISO 11259, Soil quality Simplified soil description 1) At the time of publication of this International Standard, only ISO 10381-3 and ISO 10381-6 have been published; the

46、other parts are at different stages of preparation. BSISO15903:20025BS ISO 15903:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the

47、 international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and servi

48、ces. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers mem

49、bers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-global.