BS ISO 12256-2002 Aerospace - Drives internal cruciform ribbed - Metric series《航空航天 内十字形槽驱动装置 米制系列》.pdf

《BS ISO 12256-2002 Aerospace - Drives internal cruciform ribbed - Metric series《航空航天 内十字形槽驱动装置 米制系列》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 12256-2002 Aerospace - Drives internal cruciform ribbed - Metric series《航空航天 内十字形槽驱动装置 米制系列》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 12256:2002 Aerospace Drives, internal, cruciform, ribbed Metric series ICS 49.030.20 Incorporating corrigendum November 2009National foreword This British Standard is the UK implementation of ISO 12256:2002, incorporating corrigendum November 2009. The start and finish of tex

2、t introduced or altered by corrigendum is indicated in the text by tags. Text altered by ISO corrigendum November 2009 is indicated in the text by . The UK participation in its preparation was entrusted to Technical Committee ACE/12/1, Aerospace fasteners, fastening systems, details and parts (inter

3、national). A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer i

4、mmunity from legal obligations. BS ISO 12256:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 26 September 2002 BSI 2010 Amendments/corrige

5、nda issued since publication Date Comments 30 April 2010 Implementation of ISO corrigendum November 2009 ISBN 978 0 580 69799 9Reference number ISO 12256:2002(E) INTERNATIONAL STANDARD ISO 12256 First edition 2002-09-01 Aerospace Drives, internal, cruciform, ribbed Metric series Aronautique et espac

6、e Empreintes cruciformes, avec saillies antidrapantes Srie mtrique BSISO12256:2002 ii BSISO12256:2002 iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is norm

7、ally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in t

8、he work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare

9、 International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some

10、 of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12256 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 4, Aerospace fastener systems. B

11、SISO12256:2002 1Aerospace Drives, internal, cruciform, ribbed Metric series 1 Scope This International Standard specifies the dimensions of metric internal cruciform ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges used in conjunction with

12、 these drives are defined in ISO 14280 and ISO 14281. 3 Configuration and dimensions See Figures 1, 2, 3 and 4 and Tables 1, 2, 3 and 4. Dimensions and tolerances are expressed in millimetres. The presentation of the location tolerances conforms to ISO 1101. 4 Designation The drive designation shall

13、 be as follows: BSISO12256:2002 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

14、lies. ISO 3202, Aerospace Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions ISO 5856, Aerospace Screws, 100 degrees normal countersunk head, internal o

15、ffset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position ISO 13921, Aerospace Screws, 100

16、degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions 2 aValues of parameters for specified heads are listed in Tables 2

17、, 3 and 4. bThis location tolerance applies to all head configurations. cAs defined in ISO 7913. Figure 1 Configuration Drive BSISO12256:2002 3 Table 1 Dimensions Drive C G M N B F R T V Drive code Drive code nom. tol. 0 01 5 nom. tol. 0,05 0 +K 0 0,05 01 5 0 + max. nom. tol. U nom. tol. inches aR1

18、0,96 0 0,03 138 0,53 0 0,05 1,27 0,3 0,46 7 0,6 0,1 1,83 0 0,2 1 R2 1,47 140 0,74 2,29 0,6 0,84 0,7 0,3 3,12 2 R3 2,41 146 0,81 3,81 1 2,03 5 45 0,8 4,5 3 R4S 6,2 4S R4L 3,48 153 1,27 5,08 1,3 2,44 0,9 0,13 0 0,05 0,4 7,11 0 0,3 4L R5 5,76 0,03 162 46 1,78 0 0,08 7,9 2,1 4,09 7 1,1 0,18 0 0,08 0,6 1

19、0,59 0 0,4 5 aFor information and comparison purposes only. BSISO12256:20024 aGauge penetration Figure 2 Configuration Drive in normal 100 countersunk head Table 2 Dimensions Drive in normal 100 countersunk head H J Gauge penetration Screw normal shank or thread diameteraDrive code max. min. max. mi

20、n. max. min. 3 R1 2,97 2,64 1,98 1,57 1,803 1,397 3,5 3,91 3,58 2,18 1,60 1,905 1,321 4 4,29 3,96 2,57 1,98 2,286 1,702 5 R2 4,67 4,34 2,95 2,36 2,667 2,083 6 6,27 5,94 3,43 2,84 2,997 2,413 7 R3 6,81 6,48 3,96 3,38 3,531 2,946 8 8,05 7,72 4,27 3,71 3,759 3,200 10 R4S 8,66 8,33 4,91 4,34 4,394 3,835

21、 12 9,60 9,27 5,84 5,28 5,334 4,775 14 R4L 10,77 10,44 7,01 6,45 6,502 5,944 16 13,11 12,52 7,14 6,48 6,299 5,639 18 14,15 13,56 8,18 7,52 7,341 6,680 20 R5 14,66 14,07 8,69 8,03 7,849 7,188 aNormal 100 countersunk head as defined in ISO 5856. BSISO12256:2002 5aGauge penetration Figure 3 Configurati

22、on Drive in reduced 100 countersunk head Table 3 Dimensions Drive in reduced 100 countersunk head H J Gauge penetration Screw normal shank or thread diameter aDrive code max. min. max. min. max. min. 4 3,91 3,58 2,18 1,60 1,905 1,321 5 4,29 3,96 2,57 1,98 2,286 1,702 6 R2 4,42 4,09 2,69 2,11 2,413 1

23、,829 7 5,92 5,59 3,07 2,49 2,642 2,057 8 R3 6,27 5,94 3,43 2,84 2,997 2,413 10 R4S 8,05 7,72 4,27 3,71 3,759 3,200 12 9,25 8,92 5,49 4,93 4,978 4,420 14 9,98 9,65 6,22 5,66 5,715 5,156 16 R4L 10,77 10,44 7,01 6,45 6,502 5,944 18 13,11 12,52 7,14 6,48 6,299 5,639 20 R5 14,15 13,56 8,18 7,52 7,341 6,6

24、80 aReduced 100 countersunk head as defined in ISO 1392 . BSISO12256:2002 16 aGauge penetration Figure 4 Configuration Drive in pan head Table 4 Dimensions Drive in pan head H J Gauge penetration Screw normal shank or thread diameter aDrive code max. min. max. min. max. min. 3 R1 2,72 2,39 1,73 1,32

25、 1,549 1,143 3,5 3,91 3,58 2,18 1,60 1,905 1,321 4 4,04 3,71 2,31 1,73 2,032 1,448 5 R2 4,80 4,47 3,07 2,49 2,794 2,210 6 6,55 6,22 3,71 3,12 3,277 2,692 7 R3 6,81 6,48 3,96 3,38 3,531 2,946 8 R4S 8,48 8,15 4,72 4,17 4,216 3,658 10 9,60 9,27 5,84 5,28 5,334 4,775 12 R4L 10,39 10,06 6,63 6,07 6,121 5

26、,563 aPan head as defined in ISO 3202. BSISO12256:2002 71) To be published. (Revision of ISO 1101:1983) BSISO12256:2002 Bibliography 1 ISO 1101, Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out 2 ISO 14280, Aerospace Drivers, ribb

27、ed, for internal cruciform ribbed or unribbed drives Metric series 3 ISO 14281, Aerospace Gauges, for internal cruciform ribbed or unribbed drives Metric series BSI Group Headquarters 389 Chiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 standards BSI - British

28、Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of Briti

29、sh Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the

30、technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buyi

31、ng standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ In response to orders for

32、 international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and

33、its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with stand

34、ards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards

35、Online can be found at http:/ Further information about BSI is available on the BSI website at http:/ Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyrig

36、ht, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the st

37、andard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright and Licensing Manager. Tel: +44 (0)20 8996 7070 Email: BS ISO 12256:2002