BS ISO 10457-2002 Textile machinery - Dyeing and finishing machines - Nominal speeds《纺织机械 染色和精整设备 额定速度》.pdf

《BS ISO 10457-2002 Textile machinery - Dyeing and finishing machines - Nominal speeds《纺织机械 染色和精整设备 额定速度》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10457-2002 Textile machinery - Dyeing and finishing machines - Nominal speeds《纺织机械 染色和精整设备 额定速度》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10457:2002 Textile machinery Dyeing and finishing machines Nominal speeds ICS 59.120.50 BS ISO 10457:2002 This British Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was published under the authority of

2、the Standards Policy and Strategy Committee on 18 November 2002 BSI 18 November 2002 ISBN 0 580 40760 8 National foreword This British Standard reproduces verbatim ISO 10457:2002 and implements it as the UK national standard. It supersedes BS ISO 10457:1991 which is withdrawn. The UK participation i

3、n its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications refe

4、rred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provi

5、sions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation,

6、 or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, page 1 and a back co

7、ver. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 10457:2002(E)INTERNATIONAL STANDARD ISO 10457 Second edition 2002-10-15 Textile machinery Dyeing and finishing machines

8、Nominal speeds Matriel pour lindustrie textile Machines de teinture et dapprt Vitesses nominales BSISO10457:2002BSISO10457:2002iiIS:75401 O2002(E) I SO 2002 All irhgts seredevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

9、 (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,

10、governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/

11、IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the me

12、mber bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10457 was prepared by Technical Committee ISO/TC 72, Textile machiner

13、y and machinery for dry- cleaning and industrial laundering, Subcommittee SC 4, Dyeing and finishing machinery and accessories. This second edition cancels and replaces the first edition (ISO 10457:1991), which has been technically revised. BSISO10457:2002iiiINTENRATIONAL TSANDADR IS:75401 O2002(E)I

14、 SO 2002 All irhgts seredevr 1Textile machinery Dyeing and finishing machines Nominal speeds 1 Scope This International Standard specifies nominal speeds for dyeing and finishing machines, with the aim of simplifying the choice of the drive units and facilitating the combination of individual machin

15、es in a production plant. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 nominal speed maximum production speed of the machine or plant 2.2 production speed speed of the fabric, measured at the exit of the machine 2.3 difference speed differ

16、ence between the local speed of the fabric and the production speed, expressed as a percentage of the production speed EXAMPLE Overfeed at a shrinkage/stretch. 2.4 local speed speed of the fabric measured at any point other than the exit of the machine 3 Nominal speeds The range of nominal speeds is

17、 given in Table 1. Table 1 Nominal speeds, in metres per minute 5 10 20 30 40 50 60 80 100 125 150 200 250 300 400 500 600 BSISO10457:20021BS ISO 10457:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing Briti

18、sh Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is t

19、he constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front co

20、ver. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should b

21、e addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been p

22、ublished as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also availab

23、le which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards

24、. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI i

25、s available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be re

26、produced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and siz

27、e, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.