BS EN ISO 17231-2017 Leather Physical and mechanical tests Determination of water repellency of garment leather《皮革制品 物理和机械试验 服装皮革防水性测定》.pdf

《BS EN ISO 17231-2017 Leather Physical and mechanical tests Determination of water repellency of garment leather《皮革制品 物理和机械试验 服装皮革防水性测定》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 17231-2017 Leather Physical and mechanical tests Determination of water repellency of garment leather《皮革制品 物理和机械试验 服装皮革防水性测定》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017)BS EN ISO 17231:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17231 September 2017 ICS 59.140

2、.30 Supersedes EN ISO 17231:2011English Version Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017) Cuir - Essais physiques et mcaniques - Dtermination de la rsistance au mouillage superficiel des cuirs pour vtements (ISO 17231:2017) This E

3、uropean Standard was approved by CEN on 19 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen

4、ces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN m

5、ember into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

6、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EU

7、ROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17231:2017 ENational forewordThis British Standard is the UK implementation of E

8、N ISO 17231:2017. It is identical to ISO 17231:2017. It supersedes BS EN ISO 17231:2011, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on this committee can be obtained

9、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 97932 3ICS 59.140.30Compliance with a B

10、ritish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN ISO 17231:2017EUROPEAN STAN

11、DARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17231 September 2017 ICS 59.140.30 Supersedes EN ISO 17231:2011English Version Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017) Cuir - Essais physiques et mcaniques - Dtermination de la rsistan

12、ce au mouillage superficiel des cuirs pour vtements (ISO 17231:2017) This European Standard was approved by CEN on 19 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

13、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

14、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

15、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdo

16、m. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17231

17、:2017 EBS EN ISO 17231:2017EN ISO 17231:2017 (E) 3 European Foreword This document (EN ISO 17231:2017) has been prepared by Technical Committee IULTCS “ International Union of Leather Technologists and Chemists Societies“ in collaboration with Technical Committee CEN/TC 289 “Leather” the secretariat

18、 of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018 and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the po

19、ssibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 17231:2011. According to the CEN-CENELEC Internal Regulations, the national standards organizatio

20、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

21、 Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17231:2017 has been approved by CEN as EN ISO 17231:2017 without any modification. ISO 17231:2017(E)IULTCS/IUP 37:2017(E)Foreword

22、 iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Principle 15 Apparatus . 16 Sampling and sample preparation 37 Procedure. 38 Expression of results 49 Test report . 4Annex A (normative) ISO photographic scale . 6Annex B (informative) Sources of apparatus . 7 ISO 2017 All rights res

23、erved iiiContents PageBS EN ISO 17231:2017ISO 17231:2017(E)IULTCS/IUP 37:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Principle 15 Apparatus . 16 Sampling and sample preparation 37 Procedure. 38 Expression of results 49 Test report . 4Annex A (normative) ISO phot

24、ographic scale . 6Annex B (informative) Sources of apparatus . 7 ISO 2017 All rights reserved iiiContents PageBS EN ISO 17231:2017ISO 17231:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of

25、preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental,

26、 in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/

27、IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility

28、 that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of paten

29、t declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to confor

30、mity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThis document was prepared by the Physical Test Commission of the International Union of Leather

31、Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna

32、 Agreement). It is based on IUP 37 published in J. Soc. Leather Tech. Chem., 86(7), p. 339, 2002, and declared an official method of the IULTCS in May 2003.IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science

33、and technology. IULTCS has three Commissions, which are responsible for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather.This second edition replaces the first edit

34、ion, ISO 17231:2006. Editorial changes have been made to Clauses 5, 7, 9a, 9e, Annex A and Annex B.IULTCS/IUP 37:2017(E)iv ISO 2017 All rights reservedBS EN ISO 17231:2017ISO 17231:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards

35、 bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organiza

36、tions, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its furt

37、her maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiv

38、es).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Int

39、roduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specifi

40、c terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThis document was prepared by the Physical Test Commissi

41、on of the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI, in accordance with the Agreement on technica

42、l cooperation between ISO and CEN (Vienna Agreement). It is based on IUP 37 published in J. Soc. Leather Tech. Chem., 86(7), p. 339, 2002, and declared an official method of the IULTCS in May 2003.IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to fu

43、rther the advancement of leather science and technology. IULTCS has three Commissions, which are responsible for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather.Th

44、is second edition replaces the first edition, ISO 17231:2006. Editorial changes have been made to Clauses 5, 7, 9a, 9e, Annex A and Annex B.IULTCS/IUP 37:2017(E)iv ISO 2017 All rights reserved INTERNATIONAL STANDARDISO 17231:2017(E)IULTCS/IUP 37:2017(E)Leather Physical and mechanical tests Determina

45、tion of water repellency of garment leather1 ScopeThis document specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method does not determine the resistance of leather to water penetration.2 Normative ref

46、erencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

47、 applies.ISO 2418, Leather Chemical, physical and mechanical and fastness tests Sampling locationISO 2419, Leather Physical and mechanical tests Sample preparation and conditioningISO 3696, Water for analytical laboratory use Specification and test methods3 Terms and definitionsFor the purposes of t

48、his document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at http:/www.iso.org/obp IEC Electropedia: available at http:/www.electropedia.org/3.1spray ratingmeasu

49、re of the resistance of the surface of a leather to wetting4 PrincipleA specified volume of distilled or deionized water is sprayed onto a test piece, which has been mounted on a ring and placed at an angle of 45 so that the centre of the test piece is at a specified distance below the spray nozzle. The spray rating is determined by comparing the appearance of the test piece with descriptive and photographic standards. The mass of water absorbed by the test piece is determined by weighing before and after applying the water spray.5