BS EN 62769-101-1-2015 Field Device Integration (FDI) Profiles Foundation Fieldbus H1《现场设备集成 (FDI) 简介 基金会现场总线H1》.pdf

《BS EN 62769-101-1-2015 Field Device Integration (FDI) Profiles Foundation Fieldbus H1《现场设备集成 (FDI) 简介 基金会现场总线H1》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62769-101-1-2015 Field Device Integration (FDI) Profiles Foundation Fieldbus H1《现场设备集成 (FDI) 简介 基金会现场总线H1》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationField Device Integration (FDI)Part 101-1: Profiles Foundation Fieldbus H1BS EN 62769-101-1:2015National forewordThis British Standard is the UK implementation of EN 62769-101-1:2015. Itis identical to IEC 62769-101-1:2015.The UK participation in its preparation was entrusted

2、 to TechnicalCommittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users a

3、re responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82581 1ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、 of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-101-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-101-1 July 2015 ICS 25.040.40; 35.100 English Version Field Device Integrati

5、on (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769-101-1:2015) Intgration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1 (IEC 62769-101-1:2015) Feldgerteintegration (FDI) - Teil 101-1: Profile - Foundation Fieldbus H 1 (IEC 62769-101-1:2015) This Eur

6、opean Standard was approved by CENELEC on 2015-06-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc

7、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE

8、NELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugosl

9、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standa

10、rdization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62769-1

11、01-1:2015 E BS EN 62769-101-1:2015EN 62769-101-1:2015 2 Foreword The text of document 65E/352/CDV, future edition 1 of IEC 62769-101-1, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-C

12、ENELEC parallel vote and approved by CENELEC as EN 62769-101-1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-23 latest date by which the national standard

13、s conflicting with the document have to be withdrawn (dow) 2018-06-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement noti

14、ce The text of the International Standard IEC 62769-101-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 62769-3:2015 NOTE Harmonized as EN 62769-3 1). 1) To

15、be published. BS EN 62769-101-1:2015EN 62769-101-1:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its app

16、lication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies

17、. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61158-5-9 2014 Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition -

18、 Type 9 elements EN 61158-5-9 2014 IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 - IEC 617

19、84-3 2010 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions EN 61784-3 2010 IEC 61804 series Function Blocks (FB) for process control EN 61804 series IEC 62541-100 2015 OPC unified architecture - Part 100: Device Interface EN

20、62541-100 2015 IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI Client - - IEC 62769-4 2015 Field Device Integration (FDI) - Part 4: FDI Packages - - IEC 62769-5 2015 Field Device Integration (FDI) - Part 5: FDI Information Model - - IEC 62769-6 - Field Device Integration (FDI) - Part 6: F

21、DI Technology Mapping - - BS EN 62769-101-1:2015 2 IEC 62769-101-1:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, abbreviated terms and acronyms . 8 3.1 Terms and definitions 8 3.2 Abbreviated terms and acronyms 8 4 Conventions 8 4.1 EDD

22、L syntax . 8 4.2 XML syntax . 8 4.3 Capitalizations 8 5 Profile for CP 1/1 (FOUNDATION H1) 9 5.1 General . 9 5.2 Catalog profile 9 5.2.1 Protocol support file . 9 5.2.2 CommunicationProfile definition . 9 5.2.3 Profile device . 9 5.2.4 Protocol version information 9 5.3 Associating a Package with a

23、CP 1/1 device . 10 5.3.1 Device type identification mapping . 10 5.3.2 Device type revision mapping 10 5.4 Information Model mapping . 10 5.4.1 ProtocolType definition 10 5.4.2 DeviceType mapping . 11 5.4.3 FunctionalGroup Identification definition 11 5.4.4 BlockType property mapping . 11 5.4.5 Mapp

24、ing to Block ParameterSet . 12 5.5 Topology elements 12 5.5.1 ConnectionPoint definition . 12 5.5.2 Communication Device definition . 14 5.5.3 Communication service provider definition . 15 5.5.4 Network definition 16 5.6 Methods 17 5.6.1 Methods for FDI Communication Servers . 17 5.6.2 Methods for

25、Gateways . 24 Annex A (normative) Topology scan schema 25 A.1 General . 25 A.2 FoundationH1AddressT 25 A.3 FoundationH1ConnectionPointT 25 A.4 FoundationH1NetworkT 26 A.5 Network 26 A.6 FoundationBlockIdentificationT . 27 A.7 FoundationIdentificationT 27 Annex B (normative) Transfer service paramete

26、rs 29 B.1 General . 29 BS EN 62769-101-1:2015IEC 62769-101-1:2015 IEC 2015 3 B.2 receiveData 29 B.3 sendData 29 B.4 OperationT 30 B.5 ResponseCodeT . 30 B.6 TransferResultDataT . 30 B.7 TransferSendDataT . 31 Annex C (informative) Communication service arguments for Transfer Method 32 Bibliography 3

27、3 Table 1 Capability File part 9 Table 2 CommunicationProfile definition 9 Table 3 Device type catalog mapping . 10 Table 4 ProtocolType Foundation_H1 definition . 10 Table 5 Inherited DeviceType Property mapping 11 Table 6 Identification Parameters . 11 Table 7 Inherited BlockType property mapping.

28、 12 Table 8 ConnectionPointType ConnectionPoint_Foundation_H1 definition . 12 Table 9 Communication device ParameterSet definition . 15 Table 10 Method Connect arguments . 18 Table 11 Method Disconnect arguments 19 Table 12 Method Transfer arguments . 20 Table 13 Method GetPublishedData arguments 22

29、 Table 14 Method SetAddress arguments 23 Table A.15 Attributes of FoundationH1ConnectionPointT . 26 Table A.16 Elements of FoundationH1ConnectionPointT 26 Table A.17 Elements of FoundationH1NetworkT 26 Table A.18 Attributes of FoundationBlockIdentificationT . 27 Table A.19 Attributes of FoundationId

30、entificationT . 28 Table B.1 Elements of receiveData 29 Table B.2 Enumerations of OperationT 30 Table B.3 Attributes of ResponseCodeT 30 Table B.4 Attributes of TransferResultDataT 31 Table B.5 Attributes of TransferSendDataT 31 BS EN 62769-101-1:2015 4 IEC 62769-101-1:2015 IEC 2015 INTERNATIONAL EL

31、ECTROTECHNICAL COMMISSION _ FIELD DEVICE INTEGRATION (FDI) Part 101-1: Profiles Foundation Fieldbus H1 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The ob

32、ject of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specificat

33、ions (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liai

34、sing with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters expres

35、s, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committe

36、es in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National

37、Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not

38、provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the

39、 latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever,

40、 whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications

41、is indispensable for the correct application of this publication. International Standard IEC 62769-101-1 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this stand

42、ard is based on the following documents: CDV Report on voting 65E/352/CDV 65E/415/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part

43、2. A list of all parts in the IEC 62769 series, published under the general title Field Device Integration (FDI), can be found on the IEC website. BS EN 62769-101-1:2015IEC 62769-101-1:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain unchanged until the sta

44、bility date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62769-101-1:2015 6 IEC 62769-101-1:2015 IEC 2015 INTRODUCTION The Int

45、ernational Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning a) Method for the Supplying and Installation of Device-Specific Functionalities, see Patent Family DE10357276; b) Method and device

46、 for accessing a functional module of automation system, see Patent Family EP2182418; c) Methods and apparatus to reduce memory requirements for process control system software applications, see Patent Family US2013232186; d) Extensible Device Object Model, see Patent Family US12/893,680. IEC takes

47、no position concerning the evidence, validity and scope of this patent right. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the worl

48、d. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Phoenix Contact GmbH therefore the browse name of each LIST in the LIST_ITEMS is the item name

49、 of the list. 5.5 Topology elements 5.5.1 ConnectionPoint definition The ConnectionPoint type ConnectionPoint_Foundation_H1 shall be used to identify CP 1/1 network communication and is defined in Table 8. The ConnectionPoint_Foundation_H1 type is a sub type of the abstract type ConnectionPointType defined in IEC 62541-100. The Address property shall be the H1 node address. The OrdinalNumber property reflects the position of the VFD within the SMIB VFD li