BS EN 62282-3-200-2016 Fuel cell technologies Stationary fuel cell power systems Performance test methods《燃料电池技术 固定燃料电池动力系统 性能试验方法》.pdf
《BS EN 62282-3-200-2016 Fuel cell technologies Stationary fuel cell power systems Performance test methods《燃料电池技术 固定燃料电池动力系统 性能试验方法》.pdf》由会员分享,可在线阅读,更多相关《BS EN 62282-3-200-2016 Fuel cell technologies Stationary fuel cell power systems Performance test methods《燃料电池技术 固定燃料电池动力系统 性能试验方法》.pdf(80页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationFuel cell technologiesPart 3-200: Stationary fuel cell power systems Performance test methodsBS EN 62282-3-200:2016National forewordThis British Standard is the UK implementation of EN 62282-3-200:2016. Itis identical to IEC 62282-3-200:2015. It supersedes BS EN 62282-3-200:
2、2012,which will be withdrawn on 12 August 2016.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/105, Fuel cell technologies.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all
3、 the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82344 2ICS 27.070Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standa
4、rd was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62282-3-200:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62282-3-200 March 2016 ICS 27.070 Supersedes
5、EN 62282-3-200:2012 English Version Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2015) Technologies des piles combustible - Partie 3-200: Systmes piles combustible stationnaires - Mthodes dessai des performances (IEC 62282-3-200:
6、2015) Brennstoffzellentechnologien - Teil 3-200: Stationre Brennstoffzellen-Energiesysteme - Leistungskennwerteprfverfahren (IEC 62282-3-200:2015) This European Standard was approved by CENELEC on 2015-12-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipula
7、te the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European
8、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC member
9、s are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norwa
10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue
11、Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62282-3-200:2016 E BS EN 62282-3-200:2016EN 62282-3-200:2016 2 European foreword The text of document 105/547/FDIS, future edition 2 of IEC 62282-3-200,
12、 prepared by IEC TC 105 “Fuel cell technologies“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62282-3-200:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or
13、 by endorsement (dop) 2016-09-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-24 This document supersedes EN 62282-3-200:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
14、 rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62282-3-200:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography,
15、the following notes have to be added for the standards indicated: ISO 9000 NOTE Harmonized as EN ISO 9000. ISO 6976:1995 NOTE Harmonized as EN ISO 6976:2005. BS EN 62282-3-200:2016EN 62282-3-200:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding E
16、uropean publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme
17、nts) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Ti
18、tle EN/HD Year IEC 60051 series Direct acting indicating analogue electrical measuring instruments and their accessories EN 60051 series IEC 60359 - Electrical and electronic measurement equipment - Expression of performance EN 60359 - IEC 60688 - Electrical measuring transducers for converting A.C.
19、 and D.C. electrical quantities to analogue or digital signals EN 60688 - IEC 61000-4-7 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connec
20、ted thereto EN 61000-4-7 - IEC 61000-4-13 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests EN 61000-4-13 - IEC 61028 - Electrical measuring instruments - X-Y
21、 recorders EN 61028 - IEC 61143 series Electrical measuring instruments - X-t recorders EN 61143 series IEC 61672-1 - Electroacoustics - Sound level meters - Part 1: Specifications EN 61672-1 - IEC 61672-2 - Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests EN 61672-2 - IEC 62
22、052-11 - Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment EN 50470-1 - IEC 62053-22 - Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) EN 62053-22 -
23、IEC 62282-3-201 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems EN 62282-3-201 - ISO 3648 - Aviation fuels - Estimation of net specific energy - - BS EN 62282-3-200:2016EN 62282-3-200:2016 4 ISO 3744 - Acoustics -
24、 Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane EN ISO 3744 - ISO 4677-1 - Atmospheres for conditioning and testing; Determination of relative humidity; Part 1 : Aspirated p
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN6228232002016FUELCELLTECHNOLOGIESSTATIONARYFUELCELLPOWERSYSTEMSPERFORMANCETESTMETHODS 燃料电池 技术 固定

链接地址:http://www.mydoc123.com/p-578298.html