BS EN 62264-2-2013 Enterprise-control system integration Objects and attributes for enterprise-control system integration《企业控制系统集成 企业控制系统集成的对象和属性》.pdf

《BS EN 62264-2-2013 Enterprise-control system integration Objects and attributes for enterprise-control system integration《企业控制系统集成 企业控制系统集成的对象和属性》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62264-2-2013 Enterprise-control system integration Objects and attributes for enterprise-control system integration《企业控制系统集成 企业控制系统集成的对象和属性》.pdf（168页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationEnterprise-control system integrationPart 2: Objects and attributes for enterprise-control system integrationBS EN 62264-2:2013National forewordThis British Standard is the UK implementation of EN 62264-2:2013. It is identical to IEC 62264-2:2013. It supersedes BS EN 62264-2

2、:2008 which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publicatio

3、n does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 76226 0ICS 25.040.40; 35.240.50Compliance with a British Standard cannot confer imm

4、unity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62264-2:2013EUROPEAN STANDARD EN 62264-2 NORME EUROPENNE EUROPISC

5、HE NORM October 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any fo

6、rm and by any means reserved worldwide for CENELEC members. Ref. No. EN 62264-2:2013 E ICS 25.040.40; 35.240.50 Supersedes EN 62264-2:2008 English version Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration (IEC 62264-2:2013) Intgration de

7、s systmes entreprise-contrle - Partie 2: Objets et attributs pour lintgration des systmes de commande dentreprise (CEI 62264-2:2013) Integration von Unternehmensfhrungs- und Leitsystemen - Teil 2: Objekte und Attribute fr die Integration von Unternehmensfhrungs- und Leitsystemen (IEC 62264-2:2013) T

8、his European Standard was approved by CENELEC on 2013-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

9、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

10、of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former

11、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62264-2:2013EN 62264-2:2013 - 2 -

12、 Foreword The text of document 65E/290/FDIS, future edition 2 of IEC 62264-2, prepared by SC 65E “Devices and integration in enterprise systems“ of IEC/TC 65 “Industrial-process measurement, control and automation“ and by ISO/TC 184/SC5 “Interoperability, integration and architectures for enterprise

13、 systems and automation applications“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62264-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement

14、 (dop) 2014-05-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-08-01 This document supersedes EN 62264-2:2008. EN 62264-2:2013 includes the following significant technical changes with respect to EN 62264-2:2008: a) update of the first edi

15、tion; b) addition of object models for exchange information used in manufacturing operations management activities, instead of just production operations management actives. The added object models were physical asset, operations definition, operations schedule, operations performance, and operation

16、s capability; c) displacement of the production specific object models in Annex A; d) displacement of the UML object models that were in EN 62264-1:2008 into this standard so that the object models and the associated attribute tables were available in the same document; e) addition of the Hierarchy

17、scope object definition to replace the Location attribute used in the previous edition; f) addition of a value type section to define the exchange of non-simple value types; g) definition of simple value types were defined using the ISO 15000-5. Attention is drawn to the possibility that some of the

18、 elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62264-2:2013 was approved by CENELEC as a European Standard without any modifi

19、cation. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61512-1 NOTE Harmonised as EN 61512-1. ISO 19439 NOTE Harmonised as EN ISO 19439. ISO 19440 NOTE Harmonised as EN ISO 19440. BS EN 62264-2:2013- 3 - EN 62264-2:2013 Annex ZA (norm

20、ative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For unda

21、ted references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62264-1 - Enterprise-control syste

22、m integration - Part 1: Models and terminology EN 62264-1 - ISO/IEC 19501 - Information technology - Open Distributed Processing - Unified Modeling Language (UML) - - BS EN 62264-2:2013 2 62264-2 IEC:2013 CONTENTS INTRODUCTION . 11 1 Scope . 12 2 Normative references . 12 3 Terms, definitions and ab

23、breviations 12 3.1 Terms and definitions 12 3.2 Abbreviations 13 4 Production operations models and generic operations models 13 4.1 Information models 13 4.2 General modeling information 15 4.3 Extensibility of attributes through properties 15 4.4 Object model structure 16 4.5 Explanation of tables

24、 . 16 4.5.1 Tables of attributes 16 4.5.2 Object identification . 16 4.5.3 Data types . 17 4.5.4 Presentation of examples 17 4.5.5 References to resources 18 4.5.6 Object relationships . 19 4.6 Relationship of models 19 4.7 Hierarchy scope 20 4.8 Value types . 20 4.8.1 Value use 20 4.8.2 Value synta

25、x 21 4.8.3 Simple value types 21 4.8.4 Unit of measure . 22 4.8.5 Array value types . 22 4.8.6 Range value types . 22 4.8.7 Series value types . 22 4.8.8 Structured value types . 22 5 Common object models 23 5.1 Personnel information . 23 5.1.1 Personnel model 23 5.1.2 Personnel class . 24 5.1.3 Per

26、sonnel class property . 24 5.1.4 Person . 25 5.1.5 Person property . 26 5.1.6 Qualification test specification . 27 5.1.7 Qualification test result 28 5.2 Role based equipment information 29 5.2.1 Role based equipment model. 29 5.2.2 Equipment class 30 5.2.3 Equipment class property 31 5.2.4 Equipme

27、nt . 32 5.2.5 Equipment property . 32 5.2.6 Equipment capability test specification 33 BS EN 62264-2:201362264-2 IEC:2013 3 5.2.7 Equipment capability test result . 34 5.3 Physical asset information . 35 5.3.1 Physical asset model . 35 5.3.2 Physical asset . 36 5.3.3 Physical asset property . 37 5.3

28、.4 Physical asset class 37 5.3.5 Physical asset class property. 38 5.3.6 Physical asset capability test specification . 38 5.3.7 Physical asset capability test result . 39 5.3.8 Equipment asset mapping 40 5.4 Material information . 40 5.4.1 Material model . 40 5.4.2 Material class 41 5.4.3 Material

29、class property 42 5.4.4 Material definition 43 5.4.5 Material definition property 44 5.4.6 Material lot 45 5.4.7 Material lot property . 47 5.4.8 Material sublot . 47 5.4.9 Material test specification 49 5.4.10 Material test result . 50 5.4.11 Assemblies 51 5.5 Process segment information 52 5.5.1 P

30、rocess segment model 52 5.5.2 Process segment . 53 5.5.3 Personnel segment specification . 54 5.5.4 Personnel segment specification property 55 5.5.5 Equipment segment specification. 56 5.5.6 Equipment segment specification property . 56 5.5.7 Material segment specification . 57 5.5.8 Material segme

31、nt specification property . 59 5.5.9 Physical asset segment specification . 59 5.5.10 Physical asset segment specification property . 60 5.5.11 Process segment parameter 61 5.5.12 Process segment dependency . 61 5.6 Containers, tools and software 63 5.6.1 Containers . 63 5.6.2 Tools . 63 5.6.3 Softw

32、are 63 6 Operations management information 63 6.1 Operations definition information . 63 6.1.1 Operations definition model . 63 6.1.2 Operations definition . 64 6.1.3 Operations material bill 65 6.1.4 Operations material bill item 66 6.1.5 Operations segment 67 6.1.6 Parameter specification . 68 6.1

33、.7 Personnel specification 69 BS EN 62264-2:2013 4 62264-2 IEC:2013 6.1.8 Personnel specification property 70 6.1.9 Equipment specification . 71 6.1.10 Equipment specification property . 72 6.1.11 Physical asset specification . 73 6.1.12 Physical asset specification property . 74 6.1.13 Material spe

34、cification . 75 6.1.14 Material specification property . 76 6.1.15 Operations segment dependency . 77 6.2 Operations schedule information . 77 6.2.1 Operations schedule model . 77 6.2.2 Operations schedule 78 6.2.3 Operations request 80 6.2.4 Segment requirement 81 6.2.5 Segment parameter . 82 6.2.6

35、 Personnel requirement 83 6.2.7 Personnel requirement property . 84 6.2.8 Equipment requirement 85 6.2.9 Equipment requirement property 86 6.2.10 Physical asset requirement 87 6.2.11 Physical asset requirement property 89 6.2.12 Material requirement 89 6.2.13 Material requirement property 91 6.2.14

36、Requested segment response . 92 6.3 Operations performance information 92 6.3.1 Operations performance model 92 6.3.2 Operations performance 93 6.3.3 Operations response . 94 6.3.4 Segment response . 95 6.3.5 Segment data 96 6.3.6 Personnel actual 97 6.3.7 Personnel actual property 98 6.3.8 Equipmen

37、t actual . 99 6.3.9 Equipment actual property . 100 6.3.10 Physical asset actual . 101 6.3.11 Physical asset actual property . 102 6.3.12 Material actual . 103 6.3.13 Material actual property . 105 6.4 Operations capability information 105 6.4.1 Operations capability model . 105 6.4.2 Operations cap

38、ability . 106 6.4.3 Personnel capability 107 6.4.4 Personnel capability property. 109 6.4.5 Equipment capability . 109 6.4.6 Equipment capability property 110 6.4.7 Physical asset capability 111 6.4.8 Physical asset capability property 112 6.4.9 Material capability . 113 6.4.10 Material capability p

39、roperty 115 6.5 Process segment capability information . 116 BS EN 62264-2:201362264-2 IEC:2013 5 6.5.1 Process segment capability model . 116 6.5.2 Process segment capability . 117 7 Object model inter-relationships . 118 8 List of objects . 120 9 Compliance 123 Annex A (normative) Production speci

40、fic information 124 Annex B (informative) Use and examples . 132 Annex C (informative) Example data sets . 140 Annex D (informative) Questions and answers about object use 148 Annex E (informative) Logical information flows . 162 Bibliography 165 Figure 1 Production operations management information

41、 models . 14 Figure 2 Operations information models for operations management . 15 Figure 3 Detailed resource relationship in models 18 Figure 4 Hierarchy scope model . 20 Figure 5 Personnel model 24 Figure 6 Role based equipment model . 30 Figure 7 Physical asset model . 35 Figure 8 Physical asset

42、and equipment relationship . 36 Figure 9 Material model . 41 Figure 10 Example of a material with an assembly . 52 Figure 11 Process segment model . 53 Figure 12 Segment dependency examples . 62 Figure 13 Operations definition model 64 Figure 14 Operations schedule model 78 Figure 15 Operations perf

43、ormance model 92 Figure 16 Operations capability Model . 106 Figure 17 Process segment capability object model . 116 Figure 18 Object model inter-relationships . 118 Figure A.1 Product definition model . 124 Figure A.2 Production schedule model . 127 Figure A.3 Production performance model . 129 Fig

44、ure A.4 Production capability model 131 Figure B.1 Personnel model . 133 Figure B.2 Instances of a person class 134 Figure B.3 UML model for class and class properties . 134 Figure B.4 Class property 135 Figure B.5 Instances of a person properties . 135 Figure B.6 Instances of person and person prop

45、erties . 135 Figure B.7 XML schema for a person object . 138 Figure B.8 XML schema for person properties 138 Figure B.9 Example of person and person property 139 BS EN 62264-2:2013 6 62264-2 IEC:2013 Figure B.10 Example of person class information . 139 Figure B.11 Adaptor to map different property

46、IDs and values 139 Figure D.1 Class and property IDs used to identify elements 151 Figure D.2 A property defining overlapping subsets of the capability 152 Figure D.3 Routing for a product 153 Figure D.4 Routing with co-products and material dependencies 154 Figure D.5 Product and process capability

47、 relationships 155 Figure D.6 Time-based dependencies 156 Figure D.7 Mixed operation example 160 Figure E.1 Enterprise to manufacturing system logical information flows 163 Figure E.2 Logical information flows among multiple systems 164 Table 1 UML notation used 16 Table 2 Example table . 17 Table 3

48、 Attributes of hierarchy scope . 20 Table 4 Commonly used CCTS types for exchange 21 Table 5 Attributes of personnel class . 24 Table 6 Attributes of personnel class property . 25 Table 7 Attributes of person . 26 Table 8 Attributes of person property . 27 Table 9 Attributes of qualification test sp

49、ecification 28 Table 10 Attributes of qualification test result . 29 Table 11 Attributes of equipment class 31 Table 12 Attributes of equipment class property . 31 Table 13 Attributes of equipment . 32 Table 14 Attributes of equipment property 33 Table 15 Attributes of equipment capability test specification . 34 Table 16 Attributes of equipment capability test result . 34 Table 17 Attributes of physical asset 36 Ta