BS EN 61167-2016 Metal halide lamps Performance specification《金属卤化物灯 性能规范》.pdf

《BS EN 61167-2016 Metal halide lamps Performance specification《金属卤化物灯 性能规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61167-2016 Metal halide lamps Performance specification《金属卤化物灯 性能规范》.pdf（218页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 61167:2016Metal halide lamps Performance specification (IEC 61167:2015, modified)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61167June 2016ICS 29.140.30 Supersedes EN 61167:2011English VersionMetal halide la

2、mps - Performance specification(IEC 61167:2015 , modified)Lampes aux halognures mtalliques - Spcifications deperformance(IEC 61167:2015 , modifie)Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise(IEC 61167:2015 , modifiziert)This European Standard was approved by CENELEC on 2016-03-07. C

3、ENELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on

4、application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN

5、-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

6、Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropis

7、ches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 61167:2016 EBS EN 61167:2016BS EN 61167:2016 BRITISH STANDARDNational fore

8、wordThis British Standard is the UK implementation of EN 61167:2016. It is derived from IEC 61167:2015. It supersedes BS EN 61167:2011 which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is

9、indicated in the text by tags . The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/1, Electric lamps.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publica

10、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 79544 2ICS 29.140.30Compliance with a British Standard cannot confer immunity

11、from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61167 June 2016 ICS 29.140.30 Supersedes

12、EN 61167:2011 English Version Metal halide lamps - Performance specification (IEC 61167:2015 , modified) Lampes aux halognures mtalliques - Spcifications de performance (IEC 61167:2015 , modifie) Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise (IEC 61167:2015 , modifiziert) This Europe

13、an Standard was approved by CENELEC on 2016-03-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

14、concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENEL

15、EC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

16、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardi

17、zation Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61167:2016

18、 E BS EN 61167:2016EN 61167:2016 2European foreword The text of document 34A/1809/FDIS, future edition 3 of IEC 61167, prepared by SC 34A “Lamps” of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61167:2016. A draft amendment, whi

19、ch covers common modifications to IEC 61167 (34A/1809/FDIS), was prepared by CLC/TC 34A “Lamps” and approved by CENELEC. The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identicalnational standard or by endorsement(dop) 2016-

20、12-10 latest date by which the nationalstandards conflicting with the documenthave to be withdrawn(dow) 2019-06-10 This document supersedes EN 61167:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall no

21、t be held responsible for identifying any or all such patent rights. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 61167:2015 are prefixed “Z”. This document has been prepared under a mandate given to CENELEC by the European Commission and the European

22、Free Trade Association, and supports essential requirements of EU Directives. For the relationship with EU Directives see informative Annexes ZZA, ZZB and ZZC, which are integral parts of this document. This standard provides test methods related to parameters as prescribed by EC Regulation 245/2009

23、, EU Regulation 1194/2012 and EU Regulation 874/2012 while conformity assessment (sampling, conformity procedures as well as limits) for market surveillance are specified in the text of the above Regulations. Endorsement notice The text of the International Standard IEC 61167:2015 was approved by CE

24、NELEC as a European Standard with agreed common modifications. BS EN 61167:2016EN 61167:20167Annex ZA (normative)Normative references to international publications with their corresponding European publicationsThe following documents, in whole or in part, are normatively referenced in this document

25、and areindispensable for its application. For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.NOTE 1 When an International Publication has been modified by common modifications, indicated by (mo

26、d), the relevantEN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:www.cenelec.euPublication Year Title EN/HD YearLight and lighting - Measurement and presentation of photometric data of lampsand luminaires -Part 1: Mea

27、surement and file formatEN 13032-1+A120042012Light and lighting - Measurement and presentation of photometric data of lampsand luminaires -Part 4: LED lamps, modules and luminairesEN 13032-4 2015IEC 60050-845 1987 International Electrotechnical Vocabulary- Chapter 845: Lighting- -IEC 60061-1 - Lamp

28、caps and holders together with gauges for the control ofinterchangeability and safety -Part 1: Lamp capsEN 60061-1 -IEC 60598-1 - Luminaires - General requirements and testsEN 60598-1 -IEC 60923 - Auxiliaries for lamps - Ballasts fordischarge lamps (excluding tubularfluorescent lamps) - Performance

29、requirementsEN 60923 -IEC 60927 - Auxiliaries for lamps - Starting devices(other than glow starters) - Performance requirementsEN 60927 -IEC/TR 61341 - Method of measurement of centre beamintensity and beam angle(s) of reflectorlampsEN 61341 -IEC 62035 - Discharge lamps (excluding fluorescentlamps)

30、- Safety specificationsEN 62035 -IEC 62321-4 Determination of certain substances in electrotechnical products -Part 4: Mercury in polymers, metalsand electronics by CV-AAS, CV-AFS,ICP-OES and ICP-MSEN 62321-4IEC 62471 - Photobiological safety of lamp and lamp systemsEN 62471 -BS EN 61167:2016 2 BS E

31、N 61167:2016EN 61167:2016EN 61167:20162European forewordThe text of document 34A/1809/FDIS, future edition 3 of IEC 61167, prepared by SC 34A “Lamps” ofIEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote andapproved by CENELEC as EN 61167:2016.A draft amendment, wh

32、ich covers common modifications to IEC 61167 (34A/1809/FDIS), wasprepared by CLC/TC 34A “Lamps” and approved by CENELEC.The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identicalnational standard or by endorsement(dop) 2016-1

33、2-10 latest date by which the nationalstandards conflicting with the documenthave to be withdrawn(dow) 2019-06-10This document supersedes EN 61167:2011.Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be

34、 held responsible for identifying any or all suchpatent rights.Clauses, subclauses, notes, tables, figures and annexes which are additional to those inIEC 61167:2015 are prefixed “Z”.This document has been prepared under a mandate given to CENELEC by the European Commissionand the European Free Trad

35、e Association, and supports essential requirements of EU Directives.For the relationship with EU Directives see informative Annexes ZZA, ZZB and ZZC, which are integralparts of this document.This standard provides test methods related to parameters as prescribed by EC Regulation 245/2009,EU Regulati

36、on 1194/2012 and EU Regulation 874/2012 while conformity assessment (sampling,conformity procedures as well as limits) for market surveillance are specified in the text of the aboveRegulations.Endorsement noticeThe text of the International Standard IEC 61167:2015 was approved by CENELEC as a Europe

37、anStandard with agreed common modifications.BS EN 61167:2016EN 61167:2016 7Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispen

38、sable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relev

39、ant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measureme

40、nt and file format EN 13032-1 +A1 2004 2012 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires EN 13032-4 2015 IEC 60050-845 1987 International Electrotechnical Vocabulary - Chapter 845: Lighting - - IEC 60061-1 -

41、 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60598-1 - Luminaires - General requirements and tests EN 60598-1 - IEC 60923 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps)

42、- Performance requirements EN 60923 - IEC 60927 - Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements EN 60927 - IEC/TR 61341 - Method of measurement of centre beam intensity and beam angle(s) of reflector lamps EN 61341 - IEC 62035 - Discharge lamps (exclu

43、ding fluorescent lamps) - Safety specifications EN 62035 - IEC 62321-4 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS EN 62321-4 IEC 62471 - Photobiological safety of lamp and lamp systems E

44、N 62471 - BS EN 61167:2016 3 BS EN 61167:2016EN 61167:2016EN 61167:2016 8 Publication Year Title EN/HD Year CIE 84 - The measurement of luminous flux - - CIE 13.3 Method of Measuring and Specifying Colour Rendering Properties of Light Sources - - BS EN 61167:2016EN 61167:2016 9 Annex ZZA (informativ

45、e) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EC) No 245/2009 aimed to be covered This European Standard has been prepared under a Commissions standardization request M/495 to provide one voluntary means of conforming to the ecodesign require

46、ments of Commission Regulation (EC) No 245/2009 of 18 March 2009 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaire

47、s able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council 2009 OJ L76. Once this standard is cited in the Official Journal of the European Union under that Regulation, compliance with the normative clauses of this standard given in Table ZZA.1 con

48、fers, within the limits of the scope of this standard, a presumption of conformity with the corresponding ecodesign requirements of that Regulation and associated EFTA Regulations. Table ZZA.1 Correspondence between this European Standard and Commission Regulation (EC) No 245/2009 of 18 March 2009 i

49、mplementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council 2009 OJ L76 and Commissions standardization request M/495 Ecodesign requirements of Regulation No 245/2009 2009 OJ L76 Clause(s) / sub-clause(s) of this EN Remarks / Notes Annex III, Article 2 Annex B o