BS EN 60745-2-13-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for chain saws《手持式电动工具 安全性 链锯的特殊要求》.pdf

《BS EN 60745-2-13-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for chain saws《手持式电动工具 安全性 链锯的特殊要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60745-2-13-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for chain saws《手持式电动工具 安全性 链锯的特殊要求》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHand-held motor-operated electric tools Safety Part 2-13: Particular requirements for chain sawsBS EN 60745-2-13:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/

2、2010 02:25, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60745-2-13:2009. Itwas derived by CENELEC from IEC 60745-2-13:2006. It supersedes BS EN60745-2-13:2007, which withdrawn.The CENELEC common modifications have been implemented at the appro-pria

3、te places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeCPL/116, Portable motor-operated tools.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purpor

4、t to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI ISBN 978 0 580 65766 5 ICS 25.140.20; 65.060.80Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of th

5、e Standards Policy and Strategy Committee onAmendments/corrigenda issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60745-2-13:2009is28 February 201020 01Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 607

6、45-2-13 NORME EUROPENNE EUROPISCHE NORM July 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exp

7、loitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60745-2-13:2009 E ICS 25.140.20; 65.060.80 Supersedes EN 60745-2-13:2007English version Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006

8、, modified) Outils lectroportatifs moteur - Scurit - Partie 2-13: Rgles particulires pour les scies chane (CEI 60745-2-13:2006, modifie) Handgefhrte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-13: Besondere Anforderungen fr Kettensgen (IEC 60745-2-13:2006, modifiziert) This European Stand

9、ard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni

10、ng such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its

11、 own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, I

12、taly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIForeword The text of the Internati

13、onal Standard IEC 60745-2-13:2006, prepared by IEC SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116), was submitted to the CENELEC Unique Accepta

14、nce Procedure and was approved by CENELEC as EN 60745-2-13 on 2007-03-01. A draft amendment (prAB), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to the formal vote. The combined texts were approved by CENELEC as a new edition of EN 60745-2-13 on 2009-06-01. This European Standa

15、rd supersedes EN 60745-2-13:2007. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-12-29 latest date by which the national standards conflicting with the EN have to be wit

16、hdrawn (dow) 2009-12-29 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2: Requirements for p

17、articular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Tr

18、ade Association and covers essential requirements of EC Directives 98/37/EC (Machinery Directive), amended by Directive 98/79/EC, and 2006/42/EC. See Annexes ZZA and ZZB. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and sa

19、fety requirements of the Directives concerned. CEN/TC 144 is producing standards for non-electric chain saws (EN 608). Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this standard. This standard follows the overall requirements of EN

20、 ISO 12100-1 and EN ISO 12100-2. This Part 2-13 is to be used in conjunction with EN 60745-1:2009. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Subclauses, items, tables and figures which are additional to those in P

21、art 1 are numbered starting from 101. BS EN 60745-2-13:2009EN 60745-2-13:2009 2 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSISubclauses, notes, tables and figures which are additional to those in IEC 60745-2-13:2006 are prefixed “Z”. Annexes ZA,

22、ZZA and ZZB have been added by CENELEC. NOTE In this standard the following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. _ BS EN 60745-2-13:2009EN 60745-2-13:2009 3 Licensed Copy: Wang Bin, ISO/EXCHANGE

23、 CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIEndorsement notice The text of the International Standard IEC 60745-2-13:2006 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60745-2-13:2009EN 60745-2-13:2009 4 Licensed Copy: Wang Bin, ISO/EXCHANGE

24、 CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSICONTENTS 1 Scope.7 2 Normative references7 3 Terms and definitions8 4 General requirements .9 5 General conditions for the tests.9 6 Void9 7 Classification 12 8 Marking and instructions .12 9 Protection against access to live parts.14 10

25、Starting.14 11 Input and current 14 12 Heating.14 13 Leakage current15 14 Moisture resistance.15 15 Electric strength15 16 Overload protection of transformers and associated circuits 15 17 Endurance 15 18 Abnormal operation.15 19 Mechanical hazards 15 20 Mechanical strength19 21 Construction .19 22

26、Internal wiring .21 23 Components .21 24 Supply connection and external flexible cords .21 25 Terminals for external conductors .21 26 Provision for earthing21 27 Screws and connections .21 28 Creepage distances, clearances and distances through insulation .21 29 Resistance to heat, fire and trackin

27、g .21 30 Resistance to rusting 21 31 Radiation, toxicity and similar hazards.21 Annexes29 Annex K (normative) Battery tools and battery packs 29 Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources .29 Annex AA (normative) Symbols for safety reco

28、mmendations and warnings30 Annex BB (informative) Instructions concerning the proper techniques for basic felling, limbing, and cross-cutting31 Bibliography 38 Normative references to international publications with theircorresponding European publicationsAnnex ZA (normative) 36 Coverage of Essentia

29、l Requirements of EC Directives Annex ZZ (informative) .37 BS EN 60745-2-13:2009EN 60745-2-13:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIFigure 101 Chain saw nomenclature .22 Figure 102 Cutting length .23 Figure 103 Holding the chain saw .2

30、3 Figure 104 Minimum rear hand guard dimensions .24 Figure 105 Straight test probe 24 Figure 106 Chain brake test25 Figure 107 Static test for release force .26 Figure 108 Bar tip guard.26 Figure 109 Handle gripping area.27 Figure 110 Impact text fixture for handle insulation .27 Figure BB.101 Descr

31、iption of felling: escape routes 33 Figure BB.102 Description of felling: undercutting .33 Figure BB.103 Tree limbing 34 Figure BB.104 Log supported along the entire length 34 Figure BB.105 Log supported one end 34 Figure BB.106 Log supported both ends .35 Figure BB.107 Bucking a log.35 Figure Z10 .

32、28 Position of transducers.BS EN 60745-2-13:2009EN 60745-2-13:2009 6Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIHAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-13: Particular requirements for chain saws 1 Scope This clause of Part 1 is app

33、licable, except as follows: Addition: This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or

34、transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners. 2 Normative references This clause of Part 1 is applicable, except as follows: Addition: ISO 3864-31), Graphical symbols Safety colours and safety signs Part 3: Des

35、ign principlesfor graphical symbols for use in safety signs ISO 6533:2001, Forestry machinery Portable chain-saw front hand-guard Dimensions and clearances ISO 6534:1992, Portable chain-saws Hand-guards Mechanical strength ISO 7914:2002, Forestry machinery Portable chain-saws Minimum handle clearanc

36、e and sizes ISO 7915:1991, Forestry machinery Portable chain-saws Determination of handle strength ISO 8334:1985, Forestry machinery Portable chain-saws Determination of balance ISO 9518:1998, Forestry machinery Portable chain-saws Kickback test ISO 10726:1992, Portable chain-saws Chain catcher Dime

37、nsions and mechanical strength ISO 11681-2:1998, Machinery for forestry Portable chain-saws Safety requirements and testing Part 2: Chain-saws for tree service _ 1)ISO 3864-3 is currently at the DIS stage. The chain saws covered by this standard are designed only to be operated with the right hand o

38、n the rear handle and the left hand on the front handle. ISO 22868:2005, Forestry machinery Noise test code for portable hand-held machines with an internal combustion engine Engineering method (Grade 2 accuracy) BS EN 60745-2-13:2009EN 60745-2-13:2009 7 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA S

39、TANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSI3 Terms and definitions This clause of Part 1 is applicable, except as follows: 3.101 chain saw tool designed to cut wood with a saw chain and consisting of an integrated unit of handles, motor and cutting attachment, designed to be supported wit

40、h two hands (see Figure 101) 3.102 chain brake device for stopping or locking the saw chain activated manually or non-manually when kickback occurs 3.103 bar tip guard shield that prevents contact with the saw chain at the tip of the guide bar, for reducing the incidence of kickbacks 3.104 chain bra

41、ke lever device, usually the front hand guard, used to activate the chain brake 3.105 chain catcher device for restraining the saw chain if it breaks or degrooves (see Figure 101) 3.106 drive sprocket chain drive wheel with teeth 3.107 front handle support handle located at or towards the front of t

42、he motor housing (see Figure 101) 3.108 front hand guard guard between the front handle and the saw chain for protecting the hand from injuries if the hand slips off the handle (see Figure 101) 3.109 guide bar part that supports and guides the saw chain (see Figure 101) 3.110 kickback rapid upward a

43、nd/or backward motion of the chain saw which can occur when the moving saw chain near the tip of the guide bar contacts an object such as a log or branch 3.111 rear hand guard extension on the lower part of the rear handle for protecting the hand from the saw chain if it breaks or degrooves (see Fig

44、ure 101) BS EN 60745-2-13:2009EN 60745-2-13:2009 8 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSI3.112 rear handle support handle located on the housing or towards the rear of the motor housing (see Figure 101) 3.113 saw chain chain, serving as a

45、cutting tool, consisting of drive links, cutters and side links, held together by rivets (see Figure 101) 3.114 spiked bumper device, fitted in front of the guide bar mounting point, acting as a pivot when in contact with a tree or log (see Figure 101 and Figure 102) 3.115 cutting length distance fr

46、om the root of the spiked bumper, along the guide bar axis to the outside edge of the cutting link, or on the inside part of the bar tip guard with the chain tension adjuster set at mid- position (see Figure 102) 3.116 run down time elapsed time from the release of the mains switch until the saw cha

47、in stops 4 General requirements This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable, except as follows: 5.2 Addition: For the tests of 19.113 one additional sample may be provided. 5.14 Addition: For tests carried out at normal load, the saw ch

48、ain and the guide bar may be removed and the drive sprocket of the chain saw loaded by means of a brake. 6 Environmental requirements This clause of Part 1 is applicable, except as follows: 6.1.2.2 Replacement: The sound power level shall be measured according to EN ISO 3744, where the acoustic envi

49、ronment, instrumentation, quantities to be measured, quantities to be determined, and the measurement procedure are specified. BS EN 60745-2-13:2009EN 60745-2-13:2009 9 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:25, Uncontrolled Copy, (c) BSIThe sound power level shall be given as A-weighted sound power level in dB reference 1 pW. The A-weighted sound pressure levels, from wh