BS EN 60512-2-5-2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance《电子设备连接器 试验和测量 试验2e 接触干扰》.pdf

《BS EN 60512-2-5-2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance《电子设备连接器 试验和测量 试验2e 接触干扰》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60512-2-5-2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance《电子设备连接器 试验和测量 试验2e 接触干扰》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60512-2-5:2003 Connectors for electronic equipment Tests and measurements Part 2-5: Electrical continuity and contact resistance tests Test 2e: Contact disturbance The European Standard EN 60512-2-5:2003 has the status of a British Standard ICS 31.220.10 BS EN 60512-2-5:2003 T

2、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2003 BSI 31 July 2003 ISBN 0 580 42329 8 National foreword This British Standard is the official English language version of EN 60512-2-5:2003. It is identical with IEC 60512-2-5:2003. Th

3、e UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be o

4、btained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facili

5、ty of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

6、 aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages

7、 This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STA

8、NDARD EN 60512-2-5 NORME EUROPENNE EUROPISCHE NORM July 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All

9、rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-2-5:2003 E ICS 31.220.10 English version Connectors for electronic equipment - Tests and measurements Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturba

10、nce (IEC 60512-2-5:2003) Connecteurs pour quipements lectroniques - Essais et mesures Partie 2-5: Essais de continuit lectrique et de rsistance de contact - Essai 2e: Perturbation de contact (CEI 60512-2-5:2003) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren Teil 2-5: Prfunge

11、n des elektrischen Durchgangs und Durchgangswiderstands - Prfung 2e: Kontaktstrungen (IEC 60512-2-5:2003) This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

12、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (Englis

13、h, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Be

14、lgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 48B/1322/FDIS, future edition 1 of IEC 60512-2-5, pr

15、epared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-2-5 on 2003-07-01. The following dates were fixed: latest date by which the EN has to be

16、 implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-07-01 _ Endorsement notice The text of the International Standard IEC 60512-2-5:2003

17、was approved by CENELEC as a European Standard without any modification. _ Page2 EN6051225:200360512-2-5 IEC:2003 3 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 2-5: Electrical continuity and contact resistance tests Test 2e: Contact disturbance 1 Scope and object This part of IEC

18、 60512, when required by the detail specification, is used for testing connectors for electronic equipment within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this test is to define a standard test met

19、hod for detecting contact disturbance of electromechanical components under specified dynamic conditions. NOTE Standard conditions of testing are defined in Part 1 of this standard. 2 Mounting of the test specimen The test specimen shall be mounted in accordance with the requirements of the detail s

20、pecification. 3 Method of measurement The contact disturbance shall be determined under dynamic conditions. The duration of the opening of closed contacts and/or the closing of open contacts shall be determined when the component is subjected to bump, shock, vibration, or acceleration tests. The mon

21、itoring of contact disturbance shall be made during the period specified in the relevant test and/or detail specification. The contacts may be monitored individually or in one or more groups as specified in the detail specification. When monitored in groups, closed contacts may be connected in serie

22、s and open contacts may be connected in parallel. NOTE If failure is indicated when testing contacts in groups, it is permitted to test individual contacts subsequently. 4 Requirements The measurement shall be made with d.c. not exceeding 150 mA. The voltage source shall not exceed 10 V. The duratio

23、n of the contact disturbance shall not exceed the value specified in the relevant test and/or detail specification. Preferred values are 1 s, 10 s, 100 s, 1 ms and 10 ms. A closed contact is considered disturbed when the voltage across it exceeds 50 % of the voltage source. An open contact is consid

24、ered disturbed when the voltage across it drops below 50 % of the voltage source. Page3 EN6051225:200360512-2-5 IEC:2003 4 In the case where the contact disturbance is considered to be a change of contact resistance, this change shall be specified in the detail specification 5 Details to be specifie

25、d When this test is required by the detail specification, the following details shall be specified: a) method of mounting and wiring the test specimen; b) monitoring period, if different from that specified in the relevant test method; c) contacts to be monitored and their operating condition; d) li

26、mit of duration of contact disturbance; e) change of contact resistance, if necessary; f) any deviation from the standard test method. _ Page4 EN6051225:2003BS EN 60512-2-5:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsibl

27、e for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments

28、 or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found o

29、n the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards

30、publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of t

31、hose that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information serv

32、ices are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purcha

33、se price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further in

34、formation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988

35、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details suc

36、h as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.