BS EN 50131-4-2009 Alarm systems - Intrusion and hold-up systems - Warning devices《报警系统 入侵和拦截系统 报警装置》.pdf

《BS EN 50131-4-2009 Alarm systems - Intrusion and hold-up systems - Warning devices《报警系统 入侵和拦截系统 报警装置》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50131-4-2009 Alarm systems - Intrusion and hold-up systems - Warning devices《报警系统 入侵和拦截系统 报警装置》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationAlarm systems Intrusion andhold-up systems Part 4: Warning devicesBS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c

2、) BSINational forewordThis British Standard is the UK implementation of EN 50131-4:2009. It super-sedes DD CLC/TS 50131-4:2006 which is withdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGW/1, Electronic security systems, to Subcommittee GW/1/1, Alarm compo-nents.A

3、 list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62769 9ICS 13.320Compliance with a British

4、 Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EX

5、CHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50131-4 NORME EUROPENNE EUROPISCHE NORM June 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung

6、Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50131-4:2009 E ICS 13.320 Supersedes CLC/TS 50131-4:2006English version Alarm systems - Intrusion and hold-up systems -

7、Part 4: Warning devices Systmes dalarme - Systmes dalarme contre lintrusion et les hold-up - Partie 4: Dispositifs davertissement Alarmanlagen - Einbruch- und berfallmeldeanlagen - Teil 4: Signalgeber This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply w

8、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secreta

9、riat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the

10、 official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Por

11、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSIEN 50131-4:2009 - 2 - Foreword This European Standard was prepared by the Technical Committee CE

12、NELEC TC 79, Alarm systems. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50131-4 on 2009-05-01. This document supersedes CLC/TS 50131-4:2006. The following dates were fixed: latest date by which the EN has to be implemented at national leve

13、l by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-05-01 EN 50131 will consist of the following parts, under the general title “Alarm systems Intrusion and hold-up s

14、ystems“: Part 1 System requirements Part 2-2 Intrusion detectors - Passive infrared detectors Part 2-3 Requirements for microwave detectors Part 2-4 Requirements for combined passive infrared and microwave detectors Part 2-5 Requirements for combined passive infrared and ultrasonic detectors Part 2-

15、6 Opening contacts (magnetic) Part 2-7-1 Intrusion detectors - Glass break detectors (acoustic) Part 2-7-2 Intrusion detectors - Glass break detectors (passive) Part 2-7-3 Intrusion detectors - Glass break detectors (active) Part 3 Control and indicating equipment Part 4 Warning devices Part 5-3 Req

16、uirements for interconnections equipment using radio frequency techniques Part 6 Power supplies Part 7 Application guidelines Part 8 Security fog devices/systems BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSI- 3 - EN 50131-4:2009

17、 Contents 1 Scope . 5 2 Normative references . 5 3 Definitions and abbreviations . 6 3.1 Definitions 6 3.2 Abbreviations . 7 4 General considerations 7 5 Requirements 7 5.1 Functional 7 5.2 Tamper . 9 5.3 Environmental 11 5.4 EMC .11 5.5 Safety .11 5.6 Electrical 12 5.7 Self test requirements 14 5.8

18、 Marking 15 5.9 Documentation .15 6 Test section .15 6.1 Functional 16 6.2 Reduced functional test .16 6.3 Response to events .17 6.4 Acoustic .19 6.5 Tamper .19 6.6 Electrical tests 23 6.7 Marking 29 6.8 Documentation .30 6.9 Environmental 30 Annex A (normative) Sound level test for warning devices

19、 .33 Annex B (informative) Example remote test protocol .36 BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSIEN 50131-4:2009 - 4 - Figures Figure A.1 Suggested method of mounting 34 Figure A.2 Measurement positions Surface mounted d

20、evices 35 Figure A.3 Measurement positions Pole mounted devices . 35 Tables Table 1 Warning device functionality 7 Table 2 Warning device responses 8 Table 3 Acoustic output levels 9 Table 4 Enclosure construction 10 Table 5 Tool dimension for tamper detection . 10 Table 6 Tamper detection. 11 Table

21、 7 Removal from mounting 11 Table 8 Storage device standby duration . 13 Table 9 Recharge periods 13 Table 10 Self test monitoring 14 Table 11 Environmental tests selection 32 BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSI- 5 - E

22、N 50131-4:2009 1 Scope This European Standard includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to each of the four security grades given in EN 50131-1. Requirements

23、 are also given for four environmental classes covering applications in internal and outdoor locations as specified in EN 50130-5. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. F

24、or undated references, the latest edition of the referenced document (including any amendments) applies. EN 50130-4:1995, Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems A1:1998 A2:2003 EN 50

25、130-5:1998, Alarm systems Part 5: Environmental test methods EN 50131-1:2006, Alarm systems Intrusion and hold-up systems Part 1: System requirements EN 50131-6:2008, Alarm systems Intrusion and hold-up systems Part 6: Power supplies EN 60065:2002, Audio, video and similar electronic apparatus Safet

26、y requirements (IEC 60065:2001, mod.) EN 60068-1:1994, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corrigendum October 1988 + A1:1992) EN 60068-2-75:1997, Environmental testing Part 2-75: Tests Test Eh: Hammer tests (IEC 60068-2-75:1997) EN 60529:1993 + corrigendum May 199

27、1, Degrees of protection provided by enclosures (IP codes) (IEC 60529:1989) EN 60950-1:2006, Information technology equipment Safety Part 1: General requirements (IEC 60950-1:2005, mod.) EN 61000-6-3:2007, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for resident

28、ial, commercial and light-industrial environments (IEC 61000-6-3:2006) EN 61672-1:2003, Electroacoustics Sound level meters Part 1: Specifications (IEC 61672-1:2002) EN 62262:2002, Degrees of protection provided by enclosure for electrical equipment against external mechanical impacts (IK code) (IEC

29、 62262:2002) BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSIEN 50131-4:2009 - 6 - 3 Definitions and abbreviations 3.1 Definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 audible alarm di

30、stinctive sound generated in response to an alarm condition 3.1.2 warning device device that gives an audible alarm in response to a notification NOTE A warning device may also provide alert indications. 3.1.3 external warning device warning device designed to be located outside the supervised premi

31、ses which gives an external audible alarm in response to a notification 3.1.4 internal warning device warning device designed to be located within the supervised premises which gives an internal audible alarm in response to a notification 3.1.5 enclosure housing that contains the components, normall

32、y comprises a backplate and a cover 3.1.6 external power source energy supply external to the I whichever is the shorter. At the end of this time, the individual acoustic output 1 m from the warning device at, at least, one of the measurement points specified in 5.1.2, shall meet the requirements of

33、 Table 3. BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSI- 13 - EN 50131-4:2009 5.6.3.2 Storage device standby time The storage device shall have sufficient capacity to maintain the warning device in standby condition for the peri

34、ods specified in Table 8. Table 8 Storage device standby duration Type Remote power source Storage device type Integral recharge capability Grade 1 Grade 2 Grade 3 Grade 4 W None Non rechargeable Not applicable 1 year 1 year 1 year 1 year X Yes Non rechargeable Not applicable 24 h 24 h 120 h 120 h Y

35、 None Rechargeable Yes 24 h 24 h 120 h 120 h Z Yes Rechargeable Yes, from remote power source 12 h 12 h 60 h 60 h NOTE 1 A type W warning device could, for example, have a dry cell as its only means of power. This storage device has no means of recharge, and will need replacing before it is complete

36、ly exhausted. NOTE 2 A type X warning device could, for example, be remotely powered from the I b) type of warning device (i.e. internal or external, remote or self powered); c) installation requirements, (e.g. wall or pole mounting); d) method of adjustment/configuration; e) operating instructions;

37、 f) connection details, including sufficient detail to enable effective interface and operation as part of the I g) supply voltage range and nominal supply voltage(s); h) quiescent and peak current consumption on each connection in the alarm sounding and non alarm sounding states, at the nominal sup

38、ply voltage; i) suitable storage device type, capacity and low voltage failure threshold (where applicable); j) response of the warning device to loss of remote power, and trigger command interconnection integrity (where applicable); k) for type Y devices the conditions required to guarantee the sto

39、rage device recharge time; l) type of acoustic output, (e.g. tone, voice etc); m) maximum sound duration time (where applicable). 6 Test section All the test parameters specified shall carry a general tolerance of 10 % unless otherwise stated. All tests shall be performed at the manufacturers specif

40、ied nominal supply voltage, unless otherwise stated. BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 08:19, Uncontrolled Copy, (c) BSIEN 50131-4:2009 - 16 - 6.1 Functional 6.1.1 General conditions The general atmospheric conditions in the measurement and tests lab

41、oratory shall be those specified in EN 60068-1:1994, 5.3.1, unless stated otherwise. Temperature: 15 C to 35 C Relative humidity: 25 % RH to 75 % RH Air pressure: 86 kPa to 106 kPa 6.1.2 General mounting The warning device shall be mounted in accordance with the manufacturers instructions. 6.1.3 Gen

42、eral testing procedures Manufacturers documented instructions regarding operation shall be read and applied to all tests. 6.2 Reduced functional test 6.2.1 Purpose To check that the warning device is operational before undergoing other tests and that it continues to function after these tests, e.g.

43、impact, environmental etc. 6.2.2 Conditions The general test conditions of 6.1.1 shall apply. 6.2.3 Mounting The mounting conditions shall be sufficient to conduct a reduced functional test, and the requirements of 6.1.2 do not necessarily apply. 6.2.4 Stimuli Apply a trigger command. Once the warni

44、ng device has activated, remove the trigger command. Open the warning device by normal means. 6.2.5 Measurement Monitor the acoustic output in response to the input stimuli. Monitor the tamper signal or message output. BS EN 50131-4:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/20

45、10 08:19, Uncontrolled Copy, (c) BSI- 17 - EN 50131-4:2009 6.2.6 Pass/Fail criteria The warning device shall generate a sound output in response to the trigger command. There is no requirement to measure this, unless there is concern that the sound output is inadequate, in which case the full sound

46、output shall be measured in accordance with 6.4.1. A tamper signal or message shall be generated when the warning device is opened by normal means. 6.3 Response to events 6.3.1 Response to trigger command 6.3.1.1 Purpose To verify that after application of a stimulus as indicated by the manufacturer

47、 the warning device responds within the correct time frame. 6.3.1.2 Conditions The general test conditions of 6.1.1 shall apply. 6.3.1.3 Mounting The general mounting conditions of 6.1.2 shall apply. 6.3.1.4 Stimuli Apply a trigger command, of greater than 400 ms where appropriate. Wait for a period

48、 greater than 10 s but less than 1 min, and cancel the trigger command, in accordance with the manufacturers instructions. 6.3.1.5 Measurement Monitor the acoustic output in response to the input stimuli, and the time from the initial application of the trigger command. 6.3.1.6 Pass/Fail criteria Th

49、e warning device shall activate within 1 s of the application of the trigger command. The warning device shall continue to sound until no more than 1 s after the cancellation of the trigger command. 6.3.2 Response to loss of trigger command interconnection integrity 6.3.2.1 Purpose To verify the correct response, according to Table 2 and as specified by the manufacturer, to removal of trigger command interconnection 6.3.2.2 Conditions The general test conditions of 6.1.1 shall