BS EN 16713-3-2016 Domestic swimming pools Water systems Water treatment Requirements《室内游泳池 供水系统 水处理 要求》.pdf

《BS EN 16713-3-2016 Domestic swimming pools Water systems Water treatment Requirements《室内游泳池 供水系统 水处理 要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16713-3-2016 Domestic swimming pools Water systems Water treatment Requirements《室内游泳池 供水系统 水处理 要求》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16713-3:2016Domestic swimming pools W a t e r s y s t e m sPart 3: Water treatment RequirementsBS EN 16713-3:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16713-3:2016.The UK participation in its preparation was entrusted to

2、 TechnicalCommittee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication

3、. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85293 0ICS 97.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on

4、29 February 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16713-3:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16713-3 February 2016 ICS 97.220.10 English Version Domestic swimming pools - Water systems - Part 3: Water treatment - Requirements Pisci

5、nes prives usage familial - Systmes de distribution deau - Partie 3: Traitement - Exigences Schwimmbder fr private Nutzung - Wassersysteme -Teil 3: Aufbereitung - Anforderungen This European Standard was approved by CEN on 5 December 2015. CEN members are bound to comply with the CEN/CENELEC Interna

6、l Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CE

7、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versi

8、ons. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P

9、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitatio

10、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16713-3:2016 EBS EN 16713-3:2016EN 16713-3:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Requirements . 5 4.1 General 5 4.2 Fill water specificati

11、ons 6 4.3 Physical and chemical pool water requirements 6 4.4 Flocculation/coagulation . 7 4.5 Disinfection . 8 4.5.1 General 8 4.5.2 Primary disinfectants 8 4.5.3 Alternative disinfection methods 9 4.6 pH-adjustment . 9 4.7 Water-balance 9 4.8 Dilution 10 4.9 Cleaning . 10 4.9.1 General . 10 4.9.2

12、Pool 10 4.9.3 Overflow channel . 10 4.9.4 Balance tank . 10 4.9.5 Pool surround 10 4.9.6 Swimming pool features and equipment . 11 Annex A (informative) Environmental aspects 12 Annex B (informative) Microbiological parameters . 15 Bibliography . 16 BS EN 16713-3:2016EN 16713-3:2016 (E) 3 European f

13、oreword This document (EN 16713-3:2016) has been prepared by Technical Committee CEN/TC 402 “Domestic Pools and Spas”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

14、the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or

15、 all such patent rights. EN 16713, Domestic swimming pools Water systems, currently comprises: Part 1: Filtration systems Requirements and test methods; Part 2: Circulation systems Requirements and test methods; Part 3: Water treatment Requirements. According to the CEN-CENELEC Internal Regulations,

16、 the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La

17、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16713-3:2016EN 16713-3:2016 (E) 4 1 Scope This European Standard specifies requirements and test methods for equipment and means of

18、 pool water treatment utilized in domestic swimming pools. This standard applies for swimming pools as defined in EN 16582-1 and will be read in conjunction with it. This standard does not apply to: pools for public use covered by EN 15288-1; spas for domestic or public use; paddling pools according

19、 to EN 71-8; natural and nature like pools. NOTE For filtration systems see EN 167131 and for circulation systems see EN 167132. The purpose of this standard is furthermore to ensure a consistently high quality of pool water in terms of hygiene in order to prevent damage to human health, particularl

20、y as a result of pathogens. At the same time, account is also to be taken of the well-being of the bathers (e.g. by minimizing the side effects caused by disinfectants). To this end, requirements are specified for water quality and water treatment. 2 Normative references The following documents, in

21、whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15031, Chemicals used for treatm

22、ent of swimming pool water Aluminium based coagulants EN 15074, Chemicals used for treatment of swimming pool water Ozone EN 15797, Chemicals used for the treatment of swimming pool water Iron based coagulants EN 16380, Chemicals used for treatment of swimming pool water Potassium peroxomonosulfate

23、EN 16400, Chemicals used for treatment of swimming pool water Hydrogen peroxide EN 16582-1:2015, Domestic swimming pools Part 1: General requirements including safety and test methods EN 16582-2:2015, Domestic swimming pools Part 2: Specific requirements including safety and test methods for ingroun

24、d pools EN 16582-3:2015, Domestic swimming pools Part 3: Specific requirements including safety and test methods for aboveground pools EN 167131, Domestic swimming pools Water systems Part 1: Filtration systems Requirements and test methods EN 167132, Domestic swimming pools Water systems Part 2: Ci

25、rculation systems Requirements and test methods BS EN 16713-3:2016EN 16713-3:2016 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16582-1:2015, EN 16582-2:2015 and in EN 16582-3:2015, and the following apply. 3.1 water treatment way to ensure wa

26、ter quality through physical and chemical actions 3.2 pool water water in the swimming or bathing pool 3.3 disinfection killing or inactivating certain microorganisms 3.4 filtrate water after the filtration process 3.5 fill water water used for the initial filling and for topping up 3.6 flow Q volum

27、e of water flowing through a certain cross section per unit time 3.7 pollutants undesirable inorganic and organic substances and microorganisms which enter, or are already present, in the pool water 3.8 free chlorine dominating forms of chlorine (dissolved gas Cl2, hypochlorous acid HOCl, hypochlori

28、te ion OCl-) depending upon the pH-value Note 1 to entry: In the pH-range relevant in the pool application, these forms are HOCl/OCl-. 3.9 active chlorine proportion of free chlorine available as the biologically active hypochlorous acid (HOCl) at a given pH 4 Requirements 4.1 General Depending on t

29、he equipment being installed and type of chemicals used, the necessary instructions and safety requirements (e.g. hazards of using chemicals inappropriately) shall be provided to the pool owner. BS EN 16713-3:2016EN 16713-3:2016 (E) 6 Pool water treatment is essential for the safety of the users but

30、 incorrect treatment can also be the cause of various disorders (e.g. stains, discolorations, corrosion). The different problems related to improper pool water treatment or materials are listed in EN 16582-1:2015, Annex D (as an example for polyester shells but can be in a similar way for other pool

31、 materials e.g. liner, paint, tiles, mineral coating and pool equipment). 4.2 Fill water specifications Water that is obtained from a mains water supply is deemed to be suitable as fill water without testing. Water that is not obtained from a mains water supply should be tested for suitability and t

32、reated, if necessary. The following maximum values are recommended for the fill water: iron: 0,1 mg/l; copper: 0,2 mg/l; manganese: 0,05 mg/l; polyphosphate as phosphorus: 0,01 mg/l; nitrates: 50 mg/l. If these values are exceeded it is recommended to treat the water to achieve the recommended value

33、s. Phosphates introduced into the swimming pool water both with the fill water, and by the swimmers, promote algal growth. By optimization of flow, treatment (e.g. filtration and flocculation) and operation, the growth of microorganisms can be reduced together with the reduction of the phosphates. 4

34、.3 Physical and chemical pool water requirements The following parameters ensure good quality bathing water. To ensure that these parameters can be achieved and maintained, the following shall be considered: a) pool design according to EN 16582 (all parts) and EN 16713-1 and EN 16713-2; b) pool inst

35、allation according to EN 16582 (all parts) and EN 16713-1 and EN 16713-2; c) pool operation and maintenance; d) physical and chemical parameters should be checked regularly with suitable measuring equipment. Basic parameters for good quality bathing water are the pH value, free chlorine (or alternat

36、e disinfectants) and combined chlorine (if applicable). If chlorine is not used or actively measured, the redox potential is one method of measurement. BS EN 16713-3:2016EN 16713-3:2016 (E) 7 Table 1 Indicative physical and chemical parameters when using chlorine disinfectant Parameter Value Water c

37、larity clear view of the pool bottom Colour of the water no colour should be observede, fTurbidity in FNU/NTU max 1,5 (preferably less than 0,5) Nitrate concentration above that of fill water in mg/l max 20 Total organic carbon (TOC) in mg/lamax 4,0 Redox potential against Ag/AgCI 3,5 m KCl in mV mi

38、n 650 pH valuec, d6,8 to 7,6 Free active chlorine (without cyanuric acid) in mg/l 0,3 to 1,5 Free chlorine used in combination with cyanuric acid in mg/l 1,0 to 3,0 Cyanuric acid in mg/l max 100bCombined chlorine in mg/l max 0,5 (preferably close to 0,0 mg/l) When using alternative/additional disinf

39、ectants other appropriate parameters may be considered. aWhen using organic compounds this value may be higher. bIf national regulations allow 100 mg/l then a suitable treatment should be applied (e.g. dilution). cSubject to the flocculant(s) used (if any). dWhen pH is greater than 7,5 the free acti

40、ve chlorine is less than 50 %. eNatural water sources may introduce water colouration. fIntentional water colouration is excluded. 4.4 Flocculation/coagulation The finest of dirt particles, hardly visible or invisible, may be present in the water. Due to their very small size these can pass through

41、the filter under certain circumstances. In order to prevent this, the smallest of dirt particles could be converted into larger particles with the help of a flocculation agent. The use of flocculants/coagulants has long been used to assist in the enhancement of water quality. It is particularly rele

42、vant in the removal of microorganism, e.g. Cryptosporidium cyst, which occurs in human faeces and is virtually impervious to disinfection. Consequently it shall be removed by filtration. The following substances are commonly used as flocculants/coagulants: a) aluminium based coagulant, as in EN 1503

43、1; b) iron based coagulant, as in EN 15797; Special caution is needed with the use of iron based coagulants, to avoid the development of corrosion and stains. These substances all form a gelatinous precipitate by hydrolysis and shall be removed by cleaning. BS EN 16713-3:2016EN 16713-3:2016 (E) 8 Fl

44、occulants are commonly used with granular media filters when necessary, however they are not mandatory. Alternative flocculants can be used, but shall comply with the general requirements regarding effectiveness, reaction and residual effect. The level of contamination of pool water in domestic pool

45、s is very small in comparison with commercial pools. It may be used in certain cases but generally flocculation/coagulation is not required on a permanent basis. 4.5 Disinfection 4.5.1 General In order for a disinfectant to work safely and reliably, it shall be equally effective against viruses, bac

46、teria, fungi and parasites. Indications for the microbiological parameters providing effective disinfection of the pool water is in Annex B. When choosing a disinfectant, differing advantages and disadvantages as regards handling, storage, transport, influence on pH value, etc. shall be taken into a

47、ccount. The safe, simple and economic operation should be at the forefront of that choice. In addition, the disinfectant should react very quickly, have a long-lasting effect (residual effect), as well as be easily and quickly measurable. Taking all of these requirements into consideration, the reco

48、mmended reliable and suitable disinfectant is chlorine or bromine. The chlorine may be supplied in a gaseous, liquid (made onsite or delivered ready-made) or solid form. In order to minimize and reduce disinfectant by-products, special attention should be paid to an effective filtration (see EN 1671

49、3-2). The disinfection of the pool water may require the installation of disinfection equipment. The disinfectant shall be added to the filtrate either using dosing pumps, erosion/soaker feeders, in situ electrochlorination systems, control valves, or other suitable methods. An automatically controlled feeder unit and equipment for determining and recording parameters such as free chlorine, the Redox potential and pH value may also be installed. NOTE The automatic system may need periodic checks according to th