BS EN 13272-2012 Railway applications Electrical lighting for rolling stock in public transport systems《轨道交通 公共运输系统中机车车辆用电力照明》.pdf

《BS EN 13272-2012 Railway applications Electrical lighting for rolling stock in public transport systems《轨道交通 公共运输系统中机车车辆用电力照明》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13272-2012 Railway applications Electrical lighting for rolling stock in public transport systems《轨道交通 公共运输系统中机车车辆用电力照明》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13272:2012Railway applications Electrical lighting for rolling stock in public transport systemsBS EN 13272:2012 BRITISH STANDARDNational forewordThis British Standard is t

2、he UK implementation of EN 13272:2012. It supersedes BS EN 13272:2001, which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway applications, to Panel RAE/1/-7, Railway applications - Lighting.A list of organizations represented on this committee

3、 can be obtained on request to its secretary.Normative: A (mandatory) requirement defined as an expression in the content of a document conveying criteria to be fulfilled if compliance with the document is to be claimed and from which no deviation is permitted CEN/CENELEC Internal Regulations, Part

4、3: Rules for the Structure and Drafting of European Standards (PNE-Rules).Informative: Information (not mandatory) intended to assist the understanding or use of the document. Informative annexes shall not contain requirements, except as optional requirements. (For example, a test method that is opt

5、ional may contain requirements but there is no need to comply with these requirements to claim compliance with the document.)This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2

6、012Published by BSI Standards Limited 2012ISBN 978 0 580 65808 2 ICS 29.140.99; 45.060.01; 91.160.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 201

7、2.Amendments/corrigenda issued since publicationDate Text affected BS EN 13272:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13272 February 2012 ICS 45.060.01; 91.160.10 Supersedes EN 13272:2001English Version Railway applications - Electrical lighting for rolling stock in public transpor

8、t systems Applications ferroviaires - Eclairage lectrique pour matriel roulant des systmes de transport public Bahnanwendungen - Elektrische Beleuchtung in Schienenfahrzeugen des ffentlichen Verkehrs This European Standard was approved by CEN on 16 December 2011. CEN members are bound to comply with

9、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage

10、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat

11、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal

12、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any m

13、eans reserved worldwide for CEN national Members. Ref. No. EN 13272:2012: EBS EN 13272:2012EN 13272:2012 (E) 2 Contents Page Foreword 3g31g3 Scope 4g32g3 Normative references 4g33g3 Terms and definitions .4g34g3 Requirements for lighting in passenger areas .6g34.1g3 General lighting 6g34.2g3 Stand-b

14、y lighting. 10g34.3g3 Emergency lighting. 10g35g3 Lighting in service areas 12g35.1g3 General lighting . 12g35.2g3 Stand-by lighting. 13g35.3g3 Emergency lighting. 13g36g3 Measuring equipment, conditions and measuring points 15g36.1g3 General . 15g36.2g3 Measuring equipment . 15g36.3g3 Conditions fo

15、r illuminance measurement 15g36.4g3 Locations for illuminance measurement 15g36.5g3 Measurement of illuminance and glare 16g37g3 Further requirements on the design of lighting systems . 16g37.1g3 General . 16g37.2g3 Maintenance 17g37.3g3 Electromagnetic compatibility (EMC) . 17g3Annex A (normative)

16、Contractual statements 18g3A.1g3 Information and requirements to be agreed and documented 18g3Annex B (normative) Definition of the door and access step width requirement for illuminance measurements . 19g3Annex C (informative) Test pulse characteristics . 20g3Annex ZA (informative) Relationship bet

17、ween this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 21g3Bibliography . 24g3BS EN 13272:2012EN 13272:2012 (E) 3 Foreword This document (EN 13272:2012) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DI

18、N. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some

19、of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13272:2001. This document has been prepared under a mandate given to CEN by the European Commission and th

20、e European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main changes with respect to the previous edition are: technical requirements have been brought

21、in line with the applicable TSIs; and requirements permitting new lighting technologies. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czec

22、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13272:2012EN 13272:2012 (E) 4 1

23、 Scope This European Standard contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport railway rolling stock under all operating and emergency conditions. This European Standard does not address lighting installed in instruments or co

24、ntrols. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CEN/TS 45

25、545 (all parts), Railway applications Fire protection on railway vehicles EN 50121 (all parts), Railway applications Electromagnetic compatibility EN 50153, Railway applications Rolling Stock Protective provisions relating to electrical hazards CIE S 008/E:2001/8995-1:2002(E) Lighting of Work Places

26、 Part 1: Indoor incl. Technical Corrigendum ISO 8995:2002/Cor.1 2005(E) CIE Publication No 17.4, International Lighting Vocabulary 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 General 3.1.1 passenger area all areas designed for passenger u

27、se 3.1.2 service area all areas which are intended to be occupied by service personnel only 3.1.3 seating area passenger area intended for seated persons, including wheelchair spaces 3.1.4 open gangway wide gangway designed to be occupied by travelling passengers Note 1 to entry: This excludes the g

28、angways that are only to be used to pass from one vehicle to another. 3.1.5 vehicle access step first fixed part of the floor threshold inside the vehicle BS EN 13272:2012EN 13272:2012 (E) 5 3.1.6 luminance (in a given direction at a given point of surface) (L) luminous intensity of the light emitte

29、d in a given direction from an element of the surface, divided by the area of the element projected in the same direction Unit: candela per square metre (cd/m2) Note 1 to entry: Adapted from EN 12665. 3.1.7 luminous flux () quantity derived from radiant flux (radiant power) by evaluating the radiati

30、on according to the spectral sensitivity of the human eye (as defined by the CIE standard photometric observer) Unit: lumen (lm) Note 1 to entry: It is the light power emitted by a source. Note 2 to entry: Adapted from EN 12665. 3.1.8 illuminance (E) ratio of the luminous flux incident on a surface

31、to the area of the illuminated surface Unit: lux (lx) = lm/m2Note 1 to entry: Illuminance was previously known as the illumination level or value. Note 2 to entry: The orientation of the surface may be defined, e.g. horizontal, vertical. 3.1.9 average illuminance (Eav) illuminance averaged over the

32、specified surface Unit: lux (lx) Note 1 to entry: Adapted from EN 12665. Note 2 to entry: In practice this may be derived either from the total luminous flux falling on the surface divided by the total area of the surface, or alternatively from an arithmetic average of the illuminances at a represen

33、tative number of points on the surface. 3.1.10 illuminance uniformity ratio of the least favourable illuminance to the average illuminance within the specified measurement surface Note 1 to entry: The least favourable illuminance may be either the minimum or maximum illuminance over all the measurem

34、ent points. 3.1.11 correlated colour temperature (of a light source) (Tcp) temperature of a Planckian radiator whose perceived colour most closely resembles that of the given stimulus at the same brightness and under specified viewing conditions Unit: Kelvin (K) Note 1 to entry: Adapted from EN 1266

35、5. BS EN 13272:2012EN 13272:2012 (E) 6 3.1.12 colour rendering effect of an illuminant on the reflective colour of objects by comparison with their reflective colour under a reference light source Note 1 to entry: Adapted from IEC 60050-845-02-59. 3.1.13 light loss factor ratio of the average illumi

36、nance of the illuminated surface after a certain period of use of a lighting installation to the average illuminance obtained under the same conditions for the installation considered conventionally as new Note 1 to entry: Adapted from IEC 60050-845-09-59. 3.1.14 unified glare rating CIE discomfort

37、glare measure 3.1.15 contractor(s) organization(s) responsible for the design, manufacture or supply of the lighting system, and the purchase, installation or use of the lighting system 3.2 Types of lighting 3.2.1 general lighting lighting of an interior provided for normal operation 3.2.2 stand-by

38、lighting lighting condition below the level of general lighting provided for a specified time limit, taking supply interruptions into account 3.2.3 emergency lighting lighting provided for a specified minimum time limit when the general or the stand-by lighting fails 3.2.4 reduced lighting level of

39、illumination as a design feature for passenger comfort and energy conservation 4 Requirements for lighting in passenger areas 4.1 General lighting 4.1.1 General The quality of lighting influences visual performance, performance attitude, safety at work and general well-being. The lighting for rollin

40、g stock in public transport systems shall enable a range of visual tasks to be performed. BS EN 13272:2012EN 13272:2012 (E) 7 The requirements to be met by the lighting system are based on the following criteria: illuminance; uniformity; limitation of glare; colour temperature and colour rendering.

41、General lighting must achieve the values set out in Table 1 or Table 2. NOTE Where agreed by contractors, it is possible for the general lighting system to adapt to the ambient lighting, provided that the contribution from the general lighting system plus that from the ambient lighting achieves the

42、values set out in Table 1 or Table 2. For high speed trains and conventional trains: general lighting shall be provided in normal operation without interruption; in the event of loss of the main power supply, general lighting shall be provided for a period of not less than 10 minutes. A lighting sys

43、tem can only satisfy specified requirements if all criteria mentioned above have been taken into account. Depending on the type and level of the difficulty of the visual task, orientation of seating, or of the type of accommodation to be lit, priority may be given to one or more of these criteria. 4

44、.1.2 Illuminance and uniformity Different requirements are made concerning the general lighting for rolling stock in public transport systems according to the service and/or location. Two classes of vehicles are defined: (a) high speed and conventional trains and (b) other trains. a) For high speed

45、and conventional trains, which travel on either or both of the high speed and conventional trans-European rail systems, the minimum value of the average illuminance and uniformity requirements shall be in accordance with Table 1. b) For other trains, the minimum value of the average illuminance and

46、uniformity requirements shall be in accordance with Table 2. BS EN 13272:2012EN 13272:2012 (E) 8 Table 1 g650 Minimum values of average illuminance and target uniformity for high speed and conventional trains Location Illuminance aUniformity Eavin lx Seating areas where no additional reading lights

47、are providedb 150 0,7 to 1,3 Seating area with reading lights which are switched off b, c 100 0,7 to 1,3 Reading zone, where reading lights are provided 150 0,7 to 1,3 Side corridors and aisles, at floor level 50 0,5 to 2,5 Side corridors and aisles, at 0,8 m above floor level 75 0,5 to 2,5 Vestibul

48、es 75 0,8 to 1,2 Vehicle access steps d 75 not applicable Toilets, washrooms 150 not applicable Steps and stairs 75 0,8 to 1,2 Standing areas, multifunctional areas, open gangways 75 0,5 to 2,5 Gangways 5 not applicable Tables 150 0,7 to 1,3 aThe values for illuminance are minimum values and may be

49、increased by agreement between contractors. bWhere the average illuminance is greater than 220 lux, the uniformity range 0,7 to 1,5 shall apply. CIn the case of seating areas in dining cars, the uniformity requirements shall not apply and alternative illuminance levels may be agreed between contractors. dMeasured across the central 80 % of the width of the vehicle access step by a light placed within or immediately adjacent to it, according to Annex B (normative). BS EN 13272:2012EN 13272:2012 (E) 9 Table 2 g6