BS EN 12061-1999 Plastics piping systems Thermoplastics fittings Test method for impact resistance《塑料管道系统 热塑配件 耐冲击试验方法》.pdf

《BS EN 12061-1999 Plastics piping systems Thermoplastics fittings Test method for impact resistance《塑料管道系统 热塑配件 耐冲击试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12061-1999 Plastics piping systems Thermoplastics fittings Test method for impact resistance《塑料管道系统 热塑配件 耐冲击试验方法》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12061:1999 BS 2782-

2、11: Method 1108D:1999 The European Standard EN 12061:1999 has the status of a British Standard ICS 23.040.45 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Plastics piping systems Thermoplastics fittings Test method for impact resistanceThis British Standard, having been prep

3、ared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 July 1999 BSI 07-1999 ISBN 0 580 32545 8 BS EN 12061:1999 Amendments issued since publication Amd. No. Date Comments National forewor

4、d This British Standard is the English language version of EN 12061:1999. The UK participation in its preparation was entrusted to Technical Committee PRI/61, Plastics piping systems and components, which has the responsibility to: aid enquirers to understand the text; present to the responsible Eur

5、opean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary.

6、Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Elect

7、ronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This do

8、cument comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999

9、CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12061:1999 E EUROPEAN STANDARD EN 12061 NORME EUROPE ENNE EUROPA ISCHE NORM January 1999 ICS 23.040.45 Descriptors: plastic tubes, pipe fittings, thermoplastic resins, impact tests, s

10、hock resistance English version Plastics piping systems Thermoplastics fittings Test method for impact resistance Syste mes de canalisation en plastique Raccords en thermoplastique Me thode dessai de re sistance au choc Kunststoff-Rohrleitungssysteme Formstu cke aus Thermoplasten Pru fverfahren der

11、Schalgza higkeit This European Standard was approved by CEN on 30 November 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

12、ibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit

13、y of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands

14、, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 12061:1999 BSI 07-1999 Foreword This European Standard has been prepared by Technical Committee CEN/TC 155, Plastics piping systems and ducting systems, the Secretariat of which is held by NNI. This European Standard shall b

15、e given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1999, and conflicting national standards shall be withdrawn at the latest by July 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizatio

16、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This standard is based on t

17、he test method described in 6.2.1 of ISO 4435:1991, Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems Specifications, prepared by the International Organization for Standardization (ISO). It is a modification of ISO 4435:1991 for reasons of applic

18、ability to other plastics materials and/or other test conditions and alignment with texts of other standards on test methods. The modifications are: editorial changes have been introduced; the possibility of specifying the position from which the fitting shall be dropped is introduced; assessment of

19、 the effect of the test impact on watertightness is introduced. The material-dependent parameters and/or performance requirements are incorporated in the System Standard(s) concerned. This standard is one of a series of standards on test methods that support System Standards for plastics piping syst

20、ems and ducting systems. Contents Page Foreword 2 1 Scope 3 2 Principle 3 3 Apparatus 3 4 Test pieces 3 5 Conditioning 3 6 Procedure 3 7 Expression of results 4 8 Test report 4Page 3 EN 12061:1999 BSI 07-1999 1 Scope This standard specifies a method for testing the impact resistance of fittings by d

21、ropping them onto a rigid surface. For a fitting with seal retaining components, such as seal retaining caps or rings, the method includes assessment of the watertightness of the fittings when the fixing elements show disturbance as a result of the test. This standard is applicable to fittings made

22、from thermoplastics materials intended to be used for buried and above ground applications. 2 Principle The impact resistance of a fitting is tested by dropping the fitting onto a rigid surface. After impact, the fitting is inspected for any cracks visible without magnification. In the case of fitti

23、ngs with separate fixing elements, e.g. for seal retention, these elements are inspected for any permanent disturbance that could cause loss of watertightness. NOTE It is assumed that the following test parameters are set by the standard making reference to this standard: a) test temperature (see cl

24、ause 3); b) sampling procedure and frequency (see clause 4); c) conditioning time and temperature as applicable (see clause 5); d) the height through which the test piece is to be dropped (see clause 6); e) the point of impact that is to hit the test base when dropped (see clause 6); f) test conditi

25、ons for assessment of watertightness (see clauses 6 and 7). 3 Apparatus 3.1 Refrigerator or liquid bath, capable of maintaining the conditioning temperature within 28C. 3.2 Temperature-controlled environment, capable of maintaining the test temperature within 28C. 3.3 Test base, comprising a solid f

26、loor made of concrete or stone at least 100 mm thick or alternatively a slab of concrete with a minimum thickness of 100 mm and a mass at least 20 times that of the test piece. The surface shall be rigid, flat, smooth and horizontal. 4 Test pieces 4.1 Test piece form The test piece shall comprise a

27、sample fitting complete, where applicable, with the sealing element and any associated means of fixing element(s) in place. 4.2 Sampling The sampling procedure and frequency shall be as specified in the referring standard. 4.3 Number Unless otherwise specified in the referring standard, the number o

28、f test pieces shall be five for sizes up to and including 200 mm and three for sizes greater than 200 mm. 5 Conditioning Determine and measure the maximum wall thickness, e, of the sample fitting. Place the test piece in the refrigerator, liquid bath or temperature-controlled environment (3.1 and 3.

29、2)a t the specified test temperature for at least the applicable minimum period given in Table 1, unless otherwise specified in the referring standard. Table 1 Minimum conditioning period Wall thickness e Minimum conditioning period mm h e 630: 60 Temperature controlled environment (3.2) with refrig

30、erator or liquid bath in the same environment 60 6.2 Release the fitting from the specified drop height in such an attitude that the specified point of impact hits the test base. NOTE The position from which the fitting shall be dropped in order to hit the specified impact point, may be decided by p

31、reliminary testing with each specific fitting type. 6.3 Inspect each fitting for and record the presence and positions of any cracks or splits visible without magnification. Disregard any surface scratches, scuffing or chipping of edges which may occur during the test. Assess the condition and/or as

32、sembly of the test piece for watertightness as necessary using the applicable test method(s) as specified by the referring standard to express the result in accordance with clause 7.Page 4 EN 12061:1999 BSI 07-1999 7 Expression of results 7.1 Unless otherwise specified in the referring standard, if

33、the fitting shows no cracks through the wall and the condition in 7.2 is conformed to, express the result as “No damage”. 7.2 If during the test the fixing element jumps off the fitting body and the element can be restored manually to its correct position, e.g. to give a watertight joint, and the co

34、ndition in 7.1 is conformed to, express the result as “No damage”. 7.3 If the fitting shows cracks through the wall or if the fixing element has jumped off the fitting without the possibility of restoring it in such a way that watertight jointing is achieved, then express the result as “Damage”. 8 T

35、est report The test report shall include the following information: a) a reference to this standard and to the referring standard; b) complete identification of the fitting under test; c) the test temperature; d) the height from which the fitting(s) was (were) dropped; e) the point of impact; f) for

36、 each test piece, the results of the test and any associated information; g) any factors which may have affected the results, such as any incidents or any operating details not specified in this standard; h) the date of the test.blankBS EN 12061:1999 BS 2782-11: Method 1108D:1999 BSI 389 Chiswick Hi

37、gh Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards In

38、stitution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards

39、 should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical co

40、mmittee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for

41、all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unl

42、ess otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its p

43、roducts and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Ad

44、ministration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may b

45、e reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and

46、 size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.