BS EN 908-1999+A1-2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety《农业机械和林业机械 灌溉用卷轴机安全性》.pdf

《BS EN 908-1999+A1-2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety《农业机械和林业机械 灌溉用卷轴机安全性》.pdf》由会员分享，可在线阅读，更多相关《BS EN 908-1999+A1-2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety《农业机械和林业机械 灌溉用卷轴机安全性》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD ICS 65.060.35; 65.060.80

2、NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Agricultural and forestry machinery Reel machines for irrigation Safety BS EN 908:1999 +A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSINational foreword This British Sta

3、ndard is the UK implementation of EN 908:1999+A1:2009. It supersedes BS EN 908:1999, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text alte

4、red by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee AGE/30, Irrigation and drainage equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to

5、include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 908:1999+A1:2009 This British Standard, having been prepared under the direction of the Engineering Sector Co

6、mmittee, was published under the authority of the Standards Committee and comes into effect on 15 April 1999 BSI 2009 Amendments/corrigenda issued since publication Date Text affected 31 October 2009 Implementation of CEN amendment Al:2009 ISBN 978 0 580 62820 7 Licensed Copy: Wang Bin, ISO/EXCHANGE

7、 CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 908:1999+A1 July 2009 ICS 65.060.35 Supersedes EN 908:1999 English Version Agricultural and forestry machinery - Reel machines for irrigation - Safety Matriel agricole et forestier - E

8、nrouleurs dirrigation - Scurit Land- und Forstmaschinen - Beregnungsmaschinen mit Schlauchtrommel - Sicherheit This European Standard was approved by CEN on 14 December 1998 and includes Amendment 1 approved by CEN on 23 May 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

9、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Eu

10、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the

11、national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

12、and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 908:

13、1999+A1:2009: E Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:2009 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 4 2 Normative references 4 3 Definitions 5 4 Safety requirements and/or measures 6 4.1 General 6 4.2 Irrigatio

14、n gun 6 4.3 Guiding system of hose 6 4.4 Spool .6 4.5 Stability .7 4.6 Orientation of the turret 7 4.7 Hydraulic lifting 7 4.8 Accessories 7 4.9 Transport 7 5 Verification of safety requirements and/or measures 7 6 Information for use 8 6.1 Instruction handbook 8 6.2 Marking .8 Annex A (normative) L

15、ist of hazards 10 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ “ “ “ 15 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “ 16 BS EN

16、908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:2009 (E) 3 Foreword This document (EN 908:1999+A1:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry“, the se

17、cretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. This documen

18、t includes Amendment 1, approved by CEN on 2009-05-23. This European Standard supersedes EN 908:1999. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission

19、 and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Annex A is normative and contains the “List of hazards“. According to the CEN/CENEL

20、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

21、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:2009 (E) 4 Introduction The extent t

22、o which hazards are covered is indicated in the scope of this standard. These hazards are specific to reel machines for irrigation. The hazards that are common to all the agricultural machines (self-propelled, mounted, semi-mounted and trailed) will be dealt with in a standard currently in preparati

23、on (prEN 1553). 1 Scope This standard specifies safety requirements and their verification for the design and construction of reel machines for irrigation including self-propelled machines. It describes methods for elimination or reduction of risks which need specific requirements for reel machines

24、for irrigation. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with. Environmental aspects ha

25、ve not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative reference

26、s are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the late

27、st edition of the publication referred to applies. EN 292-1: 1991, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology. EN 292-2:1991, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles and specification

28、s (and amendment A1:1995). EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards. prEN 1553:1998, Agricultural machinery Agri

29、cultural self-propelled, mounted, semi-mounted and trailed machines Common safety requirements. BS EN 908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:2009 (E) 5 3 Definitions For the purpose of this standard, the defi

30、nitions given in EN 292-1:1991 and EN 292-2:1991 apply together with the following: 3.1 reel machine type of traveller irrigation machine featuring a stationary structure with a reel, coiling a hose which carries irrigation water to, and drags, a travelling cart, upon which is affixed the emitting s

31、ystem, which is most often an irrigation gun 3.2 irrigation gun large sprinkler used on reel machines and other systems NOTE The usual flow-rates from guns range from 10 m 3 /h to 100 m 3 /h, and their nozzle diameter from 10 mm to 40 mm. 3.3 coiling one of the actions performed by the reel machine

32、when irrigating: the reel machine is progressively coiling all the polyethylene hose on the drum, causing the irrigation gun to move regularly across the irrigation field. When the irrigation gun reaches the machine, the coiling is completed and the machine stops 3.4 guiding system lateral guiding d

33、evice of the hose that permits its steady coiling with joined spirals 3.5 drive system of the guiding system mechanism providing power to the guiding system that ensures the even layering of the hose 3.6 sweeping zone envelope of the different positions of the turret corresponding to its different p

34、ossible orientations 1 - Drum of the spool 2 - Turret 3 - Hose guiding system 4 - Irrigation gun Figure 1 BS EN 908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:2009 (E) 6 4 Safety requirements and/or measures 4.1 Gene

35、ral The reel machines for irrigation shall comply as appropriate with EN 292 for hazards which are not dealt with and especially with annex A of EN 292-2:1991/A1:1995 when EN 292 does not give precise requirements. Unless otherwise specified in this standard, the machine shall comply with the requir

36、ements of prEN 1553:1998 and with tables 1, 3, 4 and 6 of EN 294:1992. 4.2 Irrigation gun The adjustment controls of the irrigation gun that have to be operated during the working (for example adjustment of the sector angle and of the rotation speed of the irrigation gun) shall be located at a dista

37、nce less than 1,80 m from the ground or from the access platform, whatever the speed of rotation of the irrigation gun. Irrigation guns with a speed of rotation greater than 1 rad.s -1shall be located at a height equal to or more than 2 m from the ground or from any platform (vertical distance betwe

38、en the ground or the platform and the lowest rotating part of the irrigation gun). This requirement does not apply: when the swivelling range of the irrigation gun is restricted to a maximum of 300 provided that the adjustment platform be located outside the swivelling range; when the irrigation gun

39、 is fitted with a guard providing a safety distance in accordance with EN 294:1992. 4.3 Guiding system of hose When the coiling speed of the hose is greater than 0,4 m.s -1 , access to crushing and shearing points between the hose and the guiding system and between the guiding system and the frame o

40、f the machine shall be prevented by fixed guards according to EN 953 or by the framework of the machine using the safety distances according to table 1 of EN 294:1992. When the uncoiling speed of the hose can be greater than 0,4 m.s-1, access to crushing and shearing points between the guiding syste

41、m and the frame of the machine shall be prevented by fixed guards according to EN 953 or by the framework of the machine using the safety distances of table 1 of EN 294:1992. Access to the drive system of the guiding system shall be prevented by fixed guards according to EN 953. 4.4 Spool If the rot

42、ation of the drum generates crushing or shearing points between the spool and the machine frame, such points shall be guarded. Satisfactory methods include for example: a guard providing the safety distance according to tables 3 and 4 of EN 294:1992; or a full (without opening) side wall without any

43、 prominent feature including the water delivery pipe between the axis of the drum and the hose. Machines equipped with hose speed selector shall be fitted with: BS EN 908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45, Uncontrolled Copy, (c) BSIEN 908:1999+A1:20

44、09 (E) 7 a device which allows for the removal of tension from the hose before changing gear; or a device which enables the operator to change gear under tension. 4.5 Stability Any means needed to ensure stability when working (e.g. jacks, supporting wheels) shall be an integral part of the machine.

45、 They shall comply with 4.3.2.1.1. of prEN 1553:1998. The machine shall be stable when resting on a slope of 8,5 in the following conditions: without using the additional means to ensure stability; hoses full of water and with irrigation gun hooked; in all the directions of the turret around its ver

46、tical axis (if applicable); with the axle positioned parallel, then perpendicular to the slope. Any functional outlet of water, associated with the use of the machine, except the possible leakages, shall be at a minimum distance of 5 m away from the machine. 4.6 Orientation of the turret If applicab

47、le, turrets shall be lockable in both working and transport positions. The centre of gravity of the mobile part shall be located at less than 0,20 m from its rotational axis when the hoses are filled of water. Failing this, the rotation shall be ensured by a hold-to-run control device located outsid

48、e from the sweeping zone. 4.7 Hydraulic lifting When hydraulic lifting systems are used, they shall be fitted with antifall devices to ensure a falling speed of less than 0,1 m.s -1in the event of rupture of a hydraulic pipe. 4.8 Accessories An appropriate housing shall be provided on the machine fo

49、r the storage of specific tools. 4.9 Transport The hose reel or machine shall be provided with means for attaching the hose to the machine during transportation. 5 Verification of safety requirements and/or measures Dimensions, where given, shall be verified by measurements. Controls shall be verified by a functional test and positional measurements; guards by functional tests. BS EN 908:1999+A1:2009 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/12/2009 07:45,