BS EN 4192-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Tees reduced bulkhead branch《航空航天系列 钛合金830管连接件 带有缩短闷头套管的三通管》.pdf

《BS EN 4192-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Tees reduced bulkhead branch《航空航天系列 钛合金830管连接件 带有缩短闷头套管的三通管》.pdf》由会员分享，可在线阅读，更多相关《BS EN 4192-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Tees reduced bulkhead branch《航空航天系列 钛合金830管连接件 带有缩短闷头套管的三通管》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 4192:2001 Pipe coupling 8 30 in titanium alloy Tees, reduced bulkhead branch The European Standard EN 4192:2001 has the status of a British Standard ICS 49.080 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 4192:2001 This British S

2、tandard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 14 November 2001 BSI 14 November 2001 ISBN 0 580 37610 9 National foreword This British Standard is the offic

3、ial English language version of EN 4192:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/12/1, Aerospace Fasteners, Fastening Systems, Details and Parts (International), which has the responsibility to: A list of organizations represented on this committee can b

4、e obtained on request to its secretary. Cross-references The British Standards which implement international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Stan

5、dards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers

6、 to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document

7、 comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEURO

8、PENNE EUROPISCHENORM EN4192 October2001 ICS49.080 Englishversion AerospaceseriesPipecoupling830intitaniumalloyTees, reducedbulkheadbranch SriearospatialeSystmederaccordement830en alliagedetitaneRaccordsent,rduitspourtraversede cloisonenpied LuftundRaumfahrtRohrverschraubung830aus TitanlegierungTVers

9、chraubungen,reduziertseitlicher AuslassalsSchottanschluss ThisEuropeanStandardwasapprovedbyCENon19April2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibli

10、ographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedt

11、otheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDA

12、RDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN4192:2001EEN4192:2001(E) Foreword ThisEuropeanStandardhasbeenpreparedbytheEuropeanAs

13、sociationofAerospaceManufacturers(AECMA). AfterinquiriesandvotescarriedoutinaccordancewiththerulesofthisAssociation,thisStandardhasreceivedthe approvaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesofAECMA,priortoitspresentation toCEN. ThisEuropeanStandardshallbegiventhestatusofa

14、nationalstandard,eitherbypublicationofanidenticaltextorby endorsement,atthelatestbyApril2002,andconflictingnationalstandardsshallbewithdrawnatthelatestbyApril2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesare boundtoimplementthisEuropeanSt

15、andard:Austria,Belgium,CzechRepublic,Denmark,Finland,France,Germany, Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnited Kingdom 2EN4192:2001(E) 1Scope Thisstandardspecifiesthecharacteristicsoftees,reduced,bulkheadbranch,forpipecouplings830,intita

16、niumalloy,for aerospaceapplications. Nominalpressure:upto28000kPa Temperaturerange: 55Cto135C 2Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications.Thesenormative referencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedherea

17、fter.Fordatedreferences, subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropeanStandardonlywhen incorporatedinitbyamendmentorrevision.Forundatedreferences,thelatesteditionofthepublicationreferredtoapplies (includingamendments). ISO58553, AerospaceseriesMJthreadsPart3:Limitdimen

18、sionsforfittingsforfluidsystems. EN2424, AerospaceseriesMarkingofaerospaceproducts. EN2491, AerospaceseriesMolybdenumdisulphidedrylubricantsCoatingmethods. EN3267, AerospaceseriesWashers,bulkhead,intitaniumalloy. EN3274, AerospaceseriesPipecoupling830ThreadendsGeometricconfiguration. EN3275, Aerospa

19、ceseriesPipecoupling830upto28000kPaDynamicbeamsealMetricseriesTechnical specification. EN3311, AerospaceseriesTitaniumalloyTIP64001AnnealedBarformachining D 150mm. 1) EN3312, AerospaceseriesTitaniumalloyTIP64001Grade2AnnealedForgings D e 150mm. 1) EN3314, AerospaceseriesTitaniumalloyTIP64001Solution

20、treatedandagedBarformachining D 75mm. 1) EN3315, AerospaceseriesTitaniumalloyTIP64001SolutiontreatedandagedForgings D e 75mm. 1) 3Requiredcharacteristics 3.1ConfigurationDimensionsMass Accordingtofigures1and2andtables1and2.Thevaluesapplybeforelubricating. Dimensionsnotspecifiedareatmanufacturersopti

21、onprovidedthatthequalificationandacceptancerequirements ofEN3275,type IIaremet. Connection1shallbe connection2. 1 )PublishedasAECMAPrestandardatthedateofpublicationofthisstandard 3EN4192:2001(E) 3.2Surfaceroughness Accordingtofigure1,unlessotherwisespecifiedinthedesigndocumentation. 3.3Materials Acc

22、ordingtoEN3311orEN3314,EN3312orEN3315. 3.4Surfacetreatment Lubrication:accordingtoEN2491,onthreadsandsealingfaces. Priortoapplicationofthelubricant,thesurfaceshallbeabrasiveblastedusingnonmetallicgrit. Filmthickness0,005mmto0,013mm. 3.5Internalsurfacefinishing FinishingshallgivearadiusRof0,3mmto1,0m

23、mandasurfaceroughnessof0,8m.Handdeburringisnot permitted. Dimensionsinmillimetres a Connection1 f Thread b Connection2 g Areaformarking c Connection3 h Acrossflats s d AccordingtoEN3274,formC i R0,3to1,0 e AccordingtoEN3274,formD Figure1 4EN4192:2001(E) Table1 Dimensionsinmillimetres Code a Thread b

24、 l 1 c,d l 2 c l 3 c,d l 4 c,e r s f 4g6g 0,2 0,4 0,2 0 0 ,1 h13 05 06 08 MJ101 MJ121,25 MJ141,5 16,3 17,8 20,8 11,0 12,0 14,0 1,2 1,4 1,3 13,8 16,0 17,8 1,0 1,0 1,0 08 09 11 10 12 14 16 18 MJ161,5 MJ181,5 MJ201,5 MJ221,5 MJ241,5 21,8 23,8 23,8 25,8 27,8 14,0 15,0 14,5 15,5 16,5 1,7 2,1 2,2 2,6 3,0

25、18,8 20,8 21,8 23,8 25,8 1,2 1,2 1,2 1,2 1,2 13 15 16 18 21 20 22 25 28 MJ271,5 MJ301,5 MJ331,5 MJ361,5 27,8 30,8 32,8 34,8 15,0 16,0 17,0 17,5 3,5 4,1 4,4 5,1 27,8 28,8 30,8 33,8 1,5 1,5 1,5 1,5 24 27 30 34 32 MJ391,5 36,4 18,0 5,6 39,8 1,5 36 a Correspondstothepipenominaloutsidediameter. b Accordi

26、ngtoISO58553. c Thesedimensionsaredefinedbythelargestconnection. d Horizontaldrilldepthdimension= l 1 + l 3 . e Verticaldrilldepthdimension= l 5 + l 4 ; l 5 accordingtoEN3274,formD. f Acrossflats 3.6Mass Accordingtofigure2andtable2. a Connection1 b Connection2 c Connection3 EXAMPLE1EN4192142205 Figu

27、re2 5EN4192:2001(E) EXAMPLE2 Connection2 Connection1 Connection3 (isinthisexample thelargestconnection) EN4192142205 : Code22 + Code14 + Code05 122,4g = 108,7g + 8,8g + 4,9g Firstpickthemassforthelargestconnectionoutoftheleftpartoftable2. Determineinthesamelineundercode14themassforconnection1andunde

28、rcode05themassforconnection3. Addallthreevaluestoreceivethetotalcouplingmass. Table2 Massforconnections1and3ingrams Code Massfor connection2 ingrams 05 06 08 10 12 14 16 18 20 22 25 28 32 05 9,6 1,6 06 15,3 1,8 2,3 08 23,4 2,0 2,7 3,7 10 27,9 2,1 2,9 3,8 4,4 12 36,2 2,4 3,1 4,2 4,8 5,4 14 58,3 2,6 3

29、,3 4,3 4,9 5,5 6,5 16 63,1 2,9 3,7 4,6 5,3 5,9 7,1 7,7 18 72,0 3,3 4,0 5,1 5,7 6,4 7,6 8,3 8,8 20 90,9 3,4 4,1 5,0 5,6 6,3 7,3 7,9 8,3 10,4 22 108,7 4,9 5,6 6,7 7,2 7,8 8,8 9,4 9,7 11,8 12,7 25 146,1 5,5 6,2 7,3 7,8 8,3 9,5 10,1 10,5 12,5 13,6 16,0 28 176,2 5,5 6,2 7,3 7,8 8,5 9,7 10,3 10,7 13,0 14,

30、1 16,6 17,8 32 221,6 4,6 5,4 6,5 7,1 7,8 9,0 9,7 10,2 12,7 14,0 16,6 18,0 19,8 6EN4192:2001(E) 4Designation EXAMPLE NOTEIfnecessary,thecodeI9005shallbeplacedbetweenthedescriptionblockandtheidentityblock. 5Marking AccordingtoEN2424,styleAandfigure1. 6Technicalspecification AccordingtoEN3275,type II.

31、7EN4192:2001(E) 7Installationdetails Seefigure3. Dimensionsinmillimetres Key 1 Bulkhead 2 WasheraccordingtoEN3267 a Griplength b Thread c Thread+0,5 Figure3 8BS EN 4192:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible fo

32、r preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or

33、editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on th

34、e inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sho

35、uld be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standa

36、rds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on a

37、ll its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membe

38、rship Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodie

39、s. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free u

40、se, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.