BS EN 3896-2002 Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2 Filler metal for welding《航空航天系列 钢FE-WM1501(X13CrNiMoCo12-3-2-2) 焊接用填充金属》.pdf

《BS EN 3896-2002 Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2 Filler metal for welding《航空航天系列 钢FE-WM1501(X13CrNiMoCo12-3-2-2) 焊接用填充金属》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3896-2002 Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2 Filler metal for welding《航空航天系列 钢FE-WM1501(X13CrNiMoCo12-3-2-2) 焊接用填充金属》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3896:2002 Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) Filler metal for welding The European Standard EN 3896:2001 has the status of a British Standard ICS 49.025.10; 25.160.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 3896:2002 This

2、 British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 11 January 2002 BSI 11 January 2002 ISBN 0 580 38194 3 National foreword This British Standard is t

3、he official English language version of EN 3896:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/48, Heat resisting wrought and cast alloys for aerospace, which has the responsibility to: A list of organizations represented on this committee can be obtained on r

4、equest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility o

5、f the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

6、 aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document

7、 comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEURO

8、PENNE EUROPISCHENORM EN3896 December2001 ICS49.025.10 Englishversion AerospaceseriesSteelFEWM1501(X13CrNiMoCo12322) Fillermetalforwelding SriearospatialeAcierFEWM1501(X13CrNiMoCo12 322)Mtaldapportdesoudage LuftundRaumfahrtStahlFEWM1501 (X13CrNiMoCo12322)Schweizusatz ThisEuropeanStandardwasapprovedby

9、CENon2May2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagement

10、CentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandards

11、bodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassa

12、rt,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3896:2001EEN3896:2001(E) 2 Foreword ThisEuropeanStandardhasbeenpreparedbytheEuropeanAssociationofAerospaceManufacturers (AECMA). Afterinquiriesandvotescarriedoutinaccordancewitht

13、herulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyJune2002

14、,andconflictingnationalstandardsshallbewithdrawnat thelatestbyJune2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,I

15、taly,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN3896:2001(E) 3 0 Introduction ThisstandardispartoftheseriesofENmetallicmaterialstandardsforaerospaceapplications.Thegeneral organisationofthisseriesisdescribedinEN4258. Thisstandardhasbeenpreparedinaccordancew

16、ithEN45005. 1 Scope Thisstandardspecifiestherequirementsrelatingto: SteelFEWM1501(X13CrNiMoCo12322) Fillermetalforwelding foraerospaceapplications. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications. Thesenormativereferencesarecitedattheapp

17、ropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latesteditionofthepublicationreferredtoapplies. EN2043 Aerospaces

18、eriesMetallicmaterialsGeneralrequirementsforsemifinishedproduct qualification(excludingforgingsandcastings) 1) EN3879 AerospaceseriesMetallicmaterialsFillermetalsforweldingTechnicalspecification 1) EN4258 AerospaceseriesMetallicmaterialsGeneralorganizationofstandardizationLinks betweentypesofENstand

19、ardsandtheiruse EN 45005 AerospaceseriesMetallicmaterialsRulesfordraftingandpresentationofmaterial standardsPart5:Specificrulesforsteels 1) 1) PublishedasAECMAPrestandardatthedateofpublicationofthisstandardEN3896:2001(E) 4 1 Materialdesignation SteelFEWM1501(X13CrNiMoCo12322) Element C Si Mn P S Cr

20、Mo Ni Co N 2 VF e min. 0,10 0,25 0,9 11,0 1,5 2,5 1,3 0,020 0,25 2 Chemical composition % max. 0,15 0,45 1,3 0,030 0,030 12,5 2,0 3,0 2,0 0,045 0,40 Base 3 Methodofmelting Airmelted 4.1 Form Fillerwireandfillerrods 4.2 Methodofproduction Colddrawn 4.3 Limitdimension(s) mm 5 Technicalspecification EN

21、3879 Deliverycondition Colddrawnandannealed 6.1 Heattreatment 6.2 Deliveryconditioncode U Usecondition Deliverycondition 7 Heattreatment Characteristics 8.1 Testsample(s) 8.2 Testpiece(s) 8.3 Heattreatment 9 Dimensionsconcerned mm 10 Thicknessofcladdingon eachface % 11 Directionoftestpiece 12 Temper

22、ature C 13 Proofstress R p0,2 MPa 14 Strength R m MPa 15 Elongation A % 16 T Reductionofarea Z % 17 Hardness 18 Shearstrength R c MPa 19 Bending k 20 Impactstrength 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupturestress R MPa 26 C Elongationat rupture A% 27 Notes(seeline98) EN

23、3896:2001(E) 5 44 Externaldefects SeeEN3879 57 Residualstress SeeEN3879 61 Internaldefects SeeEN3879 82 Batchuniformity (Materialverification) SeeEN3879 95 Markinginspection SeeEN3879 96 Dimensionalinspection SeeEN3879 98 Notes 99 Typicaluse EN3896:2001(E) 6 100 Productqualification SeeEN2043 Qualif

24、icationprogrammetobeagreedbetweenmanufacturerandpurchaser.BS EN 3896:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the internation

25、al level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We woul

26、d be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an indi

27、vidual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 700

28、1. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards

29、 BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Cen

30、tre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +

31、44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in a

32、ll BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means e

33、lectronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.