BS EN 3745-515-2012 Aerospace series Fibres and cables optical aircraft use Test methods Buffer insertion force《航空航天系列 飞行器用光纤和光缆 试验方法 缓冲器插入力》.pdf

《BS EN 3745-515-2012 Aerospace series Fibres and cables optical aircraft use Test methods Buffer insertion force《航空航天系列 飞行器用光纤和光缆 试验方法 缓冲器插入力》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3745-515-2012 Aerospace series Fibres and cables optical aircraft use Test methods Buffer insertion force《航空航天系列 飞行器用光纤和光缆 试验方法 缓冲器插入力》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3745-515:2012Aerospace series Fibres andcables, optical, aircraft use Test methodsPart 515: Buffer insertion forceBS EN 3745-515:2012 BRITISH STANDARDNational forewordThis

2、British Standard is the UK implementation of EN 3745-515:2012.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.Thi

3、s publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 77590 1ICS 49.090Compliance with a British Standard cannot confer immuni

4、ty fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2012.Amendments issued since publicationDate Text affectedBS EN 3745-515:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3745-515 July 2012 ICS 49.090 En

5、glish Version Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force Srie arospatiale - Fibres et cbles optiques usage aronautique - Mthodes dessais - Partie 515: Force dinsertion de la gaine intermdiaire Luft- und Raumfahrt - Faseroptische Leit

6、ungen fr Luftfahrzeuge - Prfverfahren - Teil 515: Steckkraft der Sekundr-Beschichtung This European Standard was approved by CEN on 23 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

7、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

8、 A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cy

9、prus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United K

10、ingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3745-515:2012: E

11、BS EN 3745-515:2012EN 3745-515:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Preparation of specimens .44 Apparatus .45 Method 5BS EN 3745-515:2012EN 3745-515:2012 (E) 3 Foreword This document (EN 3745-515:2012) has been prepared by the Aerospace and Defence Industries Associ

12、ation of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This

13、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013. Attention is drawn to the possibility that some of the

14、 elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement th

15、is European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak

16、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3745-515:2012EN 3745-515:2012 (E) 4 1 Scope This European Standard specifies procedures for the practical measurement of the force required to move the buffer a specified distance relative to the outer jacket. 2 Normative

17、 references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appl

18、ies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 2591-601, Aerospace series Elements of electrical and optical connection Test methods Part 601: Optical elements Insertion loss EN 2591-602, Aerospace series Elements of electrical and

19、optical connection Test methods Part 602: Optical elements Variation of attenuation and optical discontinuity EN 3745-100, Aerospace series Fibres and cables, optical, aircraft use Test methods Part 100: General 3 Preparation of specimens 3.1 The fibre ends shall be terminated with termini designed

20、for semi-loose structure fibre optic cable. 3.2 The length of fibre to be tested shall be in accordance with the applicable product standard. 3.3 The number of specimens shall be in accordance with the applicable product standard. 4 Apparatus 4.1 A micrometre with at least 0,1 mm resolution shall be

21、 used to measure the buffer movement over the distance specified in the applicable product standard. 4.2 A force gauge with at least 0,1 N resolution, capable of measuring the applicable force required to move the buffer the distance specified in the applicable product standard. 4.3 A mechanical fix

22、ture which will hold the terminated specimen in the compression apparatus and not permit any horizontal or vertical movement of the terminus body. A typical arrangement is shown in Figure 1. BS EN 3745-515:2012EN 3745-515:2012 (E) 5 Key 1 Compression distance 2 Force applied 3 Terminus ferrule 4 Ter

23、minus fixture 5 Clamp 6 Fibre optic cable (terminated on one end) Figure 1 5 Method 5.1 Procedure a) Install the terminus, on both cable ends. b) Cut the assembly at the midway point and then clamp the unterminated end with sufficient force to prevent buffer movement. c) Attach the terminated end of

24、 the cable to the compression apparatus. d) Apply sufficient force to compress the ferrule the distance specified in the product standard and record the force required. e) Repeat steps c) and d) on the other terminated end of cable assembly. 5.2 Final measurements and requirements Record the average

25、 of the measured force to move the buffer the specified distance on each specimen end. The average shall not exceed the value in the applicable product standard. This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British S

26、tandards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standa

27、rds Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or e

28、ditions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the insi

29、de frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.

30、Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Serv

31、ices.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on n

32、ational, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and othe

33、r benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the

34、data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BS

35、I for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI

36、. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: