BS EN 3243-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Ferrule welded with dynamic beam seal end《航空航天系列 钛合金830管连接件 带动力横梁密封端头的焊接环箍》.pdf

《BS EN 3243-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Ferrule welded with dynamic beam seal end《航空航天系列 钛合金830管连接件 带动力横梁密封端头的焊接环箍》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3243-2001 Aerospace series - Pipe coupling 8 30 in titanium alloy - Ferrule welded with dynamic beam seal end《航空航天系列 钛合金830管连接件 带动力横梁密封端头的焊接环箍》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3243:2001 Pipe coupling 8 30 in titanium alloy Ferrule, welded, with dynamic beam seal end The European Standard EN 3243:2001 has the status of a British Standard ICS 49.080 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 3243:2001

2、This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 14 November 2001 BSI 14 November 2001 ISBN 0 580 37123 9 National foreword This British Standar

3、d is the official English language version of EN 3243:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/12/1, Aerospace Fasteners, Fastening Systems, Details and Parts (International), which has the responsibility to: A list of organizations represented on this c

4、ommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or b

5、y using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer imm

6、unity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate the

7、m in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROP

8、EANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3243 October2001 ICS49.080 Englishversion AerospaceseriesPipecoupling830intitaniumalloy Ferrule,welded,withdynamicbeamsealend SriearospatialeSystmederaccordement830en alliagedetitaneOlivesoudeavecjointlvre LuftundRaumfahrtRohrverschraubung830aus Titanlegie

9、rungAnschweistutzenmitDichtlippe ThisEuropeanStandardwasapprovedbyCENon6January2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconc

10、ernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehast

11、hesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDE

12、NORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3243:2001EEN3243:2001(E) 2 Foreword ThisEuropeanStandardhasbeenpreparedbytheEuropeanAssociationofAerospaceMa

13、nufacturers (AECMA). AfterinquiriesandvotescarriedoutinaccordancewiththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eith

14、erbypublicationofanidentical textorbyendorsement,atthelatestbyApril2002,andconflictingnationalstandardsshallbewithdrawnat thelatestbyApril2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgiu

15、m,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN3243:2001(E) 3 1 Scope Thisstandardspecifiesthecharacteristicsofweldedferruleswithdynamicbeamsealendforpipecouplings 8 30,intitaniumalloy

16、,foraerospaceapplications. Nominalpressure:upto28000kPa Temperaturerange:55 Cto135 C 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fo

17、rdatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferences,the latesteditionofthepublicationreferredtoapplies(includingamendments). EN2424 AerospaceseriesMarkingofaerospaceproducts EN2656 Ae

18、rospaceseriesPipecouplingCouplingends,weldedGeometricconfiguration EN3272 AerospaceseriesPipecoupling8 30Dynamicbeamsealendforferrules,welded Geometricconfiguration EN3275 AerospaceseriesPipecoupling8 30upto28000kPaDynamicbeamsealMetric seriesTechnicalspecification EN3311 AerospaceseriesTitaniumallo

19、yTIP64001AnnealedBarformachining D 150mm 1) EN3314 AerospaceseriesTitaniumalloyTIP64001SolutiontreatedandagedBarfor machining D 75mm 1) 1 )PublishedasAECMAPrestandardatthedateofpublicationofthisstandardEN3243:2001(E) 4 3 Requiredcharacteristics 3.1 ConfigurationDimensionsMass Accordingtofigure1andta

20、ble1 Dimensionsnotspecifiedareatthemanufacturersoptionprovidedthatthequalificationandacceptance requirementsofEN3275,type IIaremet. 3.2 Surfaceroughness Accordingtofigure1,unlessotherwisespecifiedinthedesigndocumentation. 3.3 Materials AccordingtoEN3311orEN3314 Dimensionsinmillimetres a Areaformarki

21、ng b AccordingtoEN2656 c AccordingtoEN3272 Figure1EN3243:2001(E) 5 Table1 Dimensionsinmillimetres l Mass l Mass l Mass g/piece Code ab g/piece Code ab g/piece Code ab 0 0,2 max. 0 0,2 max. 0 0,2 max. 1805 5,35 2816 22,21 0504 0505 18 1,08 1,17 1807 6,26 2820 29 25,72 0605 17 1,57 1810 7,55 3210 18,7

22、3 0805 1,98 1813 22 8,78 3212 30 20,96 0806 17 2,12 2006 8,52 1005 2,44 2007 9,08 1008 17 2,98 2012 11,70 1205 3,05 2015 24 13,21 1206 3,29 2208 10,56 1209 18 3,98 2212 13,11 1405 3,69 2216 26 15,56 1408 4,63 2508 13,36 1410 20 5,21 2509 14,19 1605 4,73 2514 18,27 1606 5,14 2518 29 21,42 1610 6,68 2

23、808 14,85 1612 22 7,42 2810 29 16,71 a Correspondstothepipenominaloutsidediameterandwallthickness b RelationshipbetweencodeandpressureclassificationaccordingtoEN2656and/orEN3272 4 Designation EXAMPLE: Descriptionblock Identityblock FERRULE,WELDED EN32430806 Numberofthisstandard Code(seetable1) NOTE:

24、Ifnecessary,thecode I9005shallbeplacedbetweenthedescriptionblockandtheidentityblock. 5 Marking AccordingtoEN2424,styleFplusmanufacturingdateorbatchnumberandfigure1. AccordingtoEN2424,styleG. 6 Technicalspecification AccordingtoEN3275,type IIBS EN 3243:2001 BSI 389 Chiswick High Road London W4 4AL BS

25、I British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. User

26、s of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secreta

27、ry of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying

28、 standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy t

29、o supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Var

30、ious BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the

31、 purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the c

32、opyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or oth

33、erwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.