BS 7519-1995 Mechanical vibration - Symbols for balancing and associated instrumentation《机械振动 平衡试验及相关仪器用符号》.pdf

《BS 7519-1995 Mechanical vibration - Symbols for balancing and associated instrumentation《机械振动 平衡试验及相关仪器用符号》.pdf》由会员分享，可在线阅读，更多相关《BS 7519-1995 Mechanical vibration - Symbols for balancing and associated instrumentation《机械振动 平衡试验及相关仪器用符号》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 7519:1995 ISO 3719:1994 Mechanical vibration Symbols for balancing and associated instrumentationBS7519:1995 This British Standard, having been prepared under the directionof the Engineering SectorBoard (E/-), was publishedunder the authorityofthe Standards Boardand comesinto eff

2、ect on 15 March 1995 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference GME/21 Draft for comment 91/82700 DC ISBN 0 580 23925 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committe

3、e GME/21, Mechanical vibration and shock, upon which the following bodies were represented: Federation of Civil Engineering Contractors Imperial College of Science and Technology Institute of Sound and Vibration Research Institution of Mechanical Engineers Lloyds Register of Shipping Ministry of Def

4、ence Open University Power Generation Contractors Association PGCA (BEAMA Ltd.) Railway Industry of Great Britain Society of British Aerospace Companies Limited Society of Environmental Engineers The following bodies were also represented in the drafting of the Standard, through subcommittees and pa

5、nels: Electricity Association University of Cranfield Amendments issued since publication Amd. No. Date CommentsBS7519:1995 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative references 1 3 Defintions and symbols 2 4 Basic symbols 3 5 Rec

6、ommended letters 9 6 Examples of symbols, using basic symbols, applicable to balancing machines with horizontal axis 10 7 Examples of symbols, using basic symbols, applicable to balancing machines with vertical axis 15 8 Symbols for use on computer periphery 18 Annex A (normative) Machine and electr

7、ical symbols of general applications taken from ISO 7000, IEC 417 and IEC 617-2 21 Annex B (informative) Recommended colours on colour monitors 28 Annex C (informative) Equivalent terms 30 Alphabetical index 37 List of references Inside back coverBS7519:1995 ii BSI 08-1999 National foreword This Bri

8、tish Standard has been prepared by Technical Committee GME/21. It is identical with ISO 3719:1994 Mechanical vibration Symbols for balancing machines and associated instrumentation published by the International Organization for Standardization (ISO). ISO 3719 was prepared by Technical Committee ISO

9、/TC 108, Mechanical vibration and shock, in which the UK played an active part. For ease of reproduction the French and Russian text has been retained. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their corr

10、ect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International Standard Corresponding British Standard ISO 1925:1990 BS 3851:1990 Glossary of terms used in the mechanical balancing of rotating machinery (Identical) ISO 20

11、41:1990 BS 3015:1991 Glossary of terms relating to mechanical vibration and shock (Identical) ISO 7000:1989 BS 7324:1990 Guide to graphical symbols for use on equipment (Identical) IEC 417:1973 BS 6217:1981 Guide to graphical symbols for use on electrical equipment (Identical) IEC 617-2:1983 BS 3939

12、-2:1985 Symbol elements, qualifying symbols and other symbols having general application (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi and ii, pages1to38, an inside back cover and a back cover. This standard has been updated (see copyright date) an

13、d may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS7519:1995 BSI 08-1999 1BS7519:1995 2 BSI 08-1999BS7519:1995 BSI 08-1999 3BS7519:1995 4 BSI 08-1999BS7519:1995 BSI 08-1999 5BS7519:1995 6 BSI 08-1999BS7519:1995 BSI 08-1999 7BS7519:1995 8

14、 BSI 08-1999BS7519:1995 BSI 08-1999 9BS7519:1995 10 BSI 08-1999BS7519:1995 BSI 08-1999 11BS7519:1995 12 BSI 08-1999BS7519:1995 BSI 08-1999 13BS7519:1995 14 BSI 08-1999BS7519:1995 BSI 08-1999 15BS7519:1995 16 BSI 08-1999BS7519:1995 BSI 08-1999 17BS7519:1995 18 BSI 08-1999BS7519:1995 BSI 08-1999 19BS7

15、519:1995 20 BSI 08-1999BS7519:1995 BSI 08-1999 21BS7519:1995 22 BSI 08-1999BS7519:1995 BSI 08-1999 23BS7519:1995 24 BSI 08-1999BS7519:1995 BSI 08-1999 25BS7519:1995 26 BSI 08-1999BS7519:1995 BSI 08-1999 27BS7519:1995 28 BSI 08-1999BS7519:1995 BSI 08-1999 29BS7519:1995 30 BSI 08-1999BS7519:1995 BSI 0

16、8-1999 31BS7519:1995 32 BSI 08-1999BS7519:1995 BSI 08-1999 33BS7519:1995 34 BSI 08-1999BS7519:1995 BSI 08-1999 35BS7519:1995 36 BSI 08-1999BS7519:1995 BSI 08-1999 37BS7519:1995 38 BSI 08-1999BS7519:1995 BSI 08-1999 List of references See national foreword.BS 7519:1995 ISO3719:1994 BSI 389 Chiswick H

17、igh Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendme

18、nt or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would

19、inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of stand

20、ards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publish

21、ed as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available whic

22、h give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits

23、contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 n

24、o extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such

25、as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.