BS 2543-2004 Upholstery fabrics for end use applications - Classification《最终用户使用的装饰性织物 分类》.pdf

《BS 2543-2004 Upholstery fabrics for end use applications - Classification《最终用户使用的装饰性织物 分类》.pdf》由会员分享，可在线阅读，更多相关《BS 2543-2004 Upholstery fabrics for end use applications - Classification《最终用户使用的装饰性织物 分类》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 2543:2004 Upholstery fabrics for end use applications Classification ICS 59.080.30; 97.140 BS 2543:2004 This British Standard was published under the authority of Standards Policy and Strategy Committee on 15 September 2004 BSI 15 September 2004 First published November 1954 Seco

2、nd edition January 1970 Third edition June 1980 Fourth edition August 1983 Fifth edition March 1987 Sixth edition January 1991 Seventh edition February 1995 Eighth edition 15 September 2004 The following BSI references relate to the work on this British Standard: Committee reference TCI/66 Draft for

3、 comment 04/30112593 DC ISBN 0 580 44390 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/66, Apparel and indoor fabrics, upon which the following bodies were represented: Association of Button Merchants Association

4、of Consulting Engineers Association of Consulting Scientists Association of Suppliers to the British Clothing Industry British Apparel and Textile Association British Clothing Industry Association British Measurement and Testing Association British Textile Technology Group Consumer Policy Committee

5、of BSI Home Laundering Consultative Council Knitting Industries Federation Ltd. Laboratory of the Government Chemist Made-up Textiles Association Mail Order Traders Association National Childrens Wear Association SATRA Technology Centre Society of Dyers and Colourists Textile Institute Zip Fastener

6、Manufacturers Association Amendments issued since publication Amd. No. Date CommentsBS 2543:2004 BSI 15 September 2004 i Contents Page Committee responsible Inside front cover Foreword ii 1S c o p e 1 2 Normative references 1 3T e r m s a n d d e f i n i t i o n s 1 4 Product profile classifications

7、 1 5 Minimum performance levels for product profile classification 2 6M a r k i n g 3 Annex A (normative) Test methods for cut pile woven fabric and flocked fabrics not included in BS EN 14465:2003 4 Bibliography 7 Figure A.1 Arrangement of testing device for scuffing with test specimen in position

8、6 Table 1 Performance levels for product profile classification of flat woven, chenille and pile fabric (BS EN 14465:2003, Table 1 and, for colour-fastness to water, Table 2) 2 Table 2 Performance levels for product profile classification of knitted fabric (BS EN 14465:2003, Table 1 and, for colour-

9、fastness to water, Table 2) 2 Table 3 Performance levels for additional properties for product profile classification of cut pile woven and flocked fabrics not included in BS EN 14465:2003 3 Table A.1 Ratings for pile loss and for scuffing 5BS 2543:2004 ii BSI 15 September 2004 Foreword This British

10、 Standard has been prepared by Technical Committee TCI/66. It is a revision of BS 2543:1995, which is withdrawn. The revision has been prompted by the publication of BS EN 14465:2003, Textiles Upholstery fabrics Specification and methods of test, which specifies a set of properties relevant to the a

11、ssessment of upholstery fabric for indoor furniture and appropriate test methods to determine these properties. However, the European Standard does not provide a designated product profile grading system adapted to each specific type of upholstery end use application. This revision provides the mini

12、mum product profile for upholstery fabric found to be useful to the users of BS 2543:1995 and cross-refers to the categories provided in BS EN 14465:2003. BS 2543:2004 only contains references to properties listed in BS EN 14465:2003 where anything other than the minimum level would be stated. This

13、publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. In particular, attention is drawn to: Sale of Goods Act 1979 The Supply

14、 of Goods and Services Act 1982 Statutory Instrument 1986 No. 26, Trade Descriptions The Textile Products (Indications of Fibre Content) Regulations 1986; Statutory Instrument 1988 No. 1324 The Furniture and Furnishings (Fire) (Safety) Regulations 1988; Statutory Instrument 1989 No. 2358 The Furnitu

15、re and Furnishings (Fire) (Safety) (Amendment) Regulations 1989; Statutory Instrument 1993 No. 207 The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations; Sale and Supply of Goods Act 1994; Sale and Supply of Goods to Consumers Regulations 2002. Summary of pages This document comprise

16、s a front cover, an inside front cover, pages i and ii, pages 1 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.BS 2543:2004 BSI 15 September 2004 1 1 Scope This British Standard provides a classification of covering fabric for d

17、omestic and contract upholstery applications. This standard does not include within its scope plastics coated fabrics where the coating is the wear surface, fabrics intended solely for loose covers, leather, fabrics for transport applications and fabrics with a nominal pile length of five millimetre

18、s or more. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the reference cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS 4655:1986,

19、 Method for the determination of pile loss of cut-pile and non-loop pile upholstery fabrics. BS EN 14465:2003, Textiles Upholstery fabrics Specification and methods of test. BS EN ISO 12947-2, Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 2: Determination

20、 of specimen breakdown. 3 Terms and definitions For the purposes of this British Standard, the following terms and definitions apply. 3.1 detachable cover intentionally removable cover which is part of the original design NOTE This differs from a loose cover, which is supplied after market and may b

21、e from a different manufacturer. 3.2 figured weaves fabric in which patterns or motifs are produced by a combination of distinct weaves, requiring a dobby or jacquard mechanism 4 Product profile classifications Fabrics shall be classified for upholstery use by a product profile comprising a twin let

22、ter grouping indicating a technical description for appropriate end-use applications. a) LD light domestic use: suitable only for upholstery intended for occasional or very light usage. NOTE 1 Piping is not recommended and arms should be well padded. NOTE 2 Buttoning is not advisable on fabrics with

23、 a tear strength of less than 20 N. b) GD general domestic use: suitable for most styles of upholstery for general domestic use. c) HD heavy domestic use: suitable for upholstery where increased durability and enhanced performance are required to counter heavy use. d) GC general contract use: suitab

24、le for upholstery likely to be subject to general contract, e.g. environments where the furniture is likely to be used throughout the day. e) SC severe contract use: suitable for all types of upholstery use.BS 2543:2004 2 BSI 15 September 2004 5 Minimum performance levels for product profile classif

25、ication Fabrics shall conform to the appropriate requirements given in Table 1, Table 2 and Table 3, when tested in accordance with the relevant methods of test detailed in BS EN 14465:2003. Table 1 Performance levels for product profile classification of flat woven, chenille and pile afabric (BS EN

26、 14465:2003, Table 1 and, for colour-fastness to water, Table 2) Table 2 Performance levels for product profile classification of knitted fabric (BS EN 14465:2003, Table 1 and, for colour-fastness to water, Table 2) Production profile classification LD GD HD GC SC Physical tensile C C B B B strength

27、 tear E D C C C properties seam slippage C B A A A All flat woven B B B B A fabrics, 15 000 c 20 000 c 25 000 c 30 000 c 40 000 c excluding figured weaves Abrasion Figured B B B B A resistance weaves b 12 000 c 15 000 c 20 000 c 30 000 c 40 000 c properties cut and uncut C C B B B woven pile, 15 000

28、 c 20 000 c 25 000 c 25 000 c 30 000 c flocked and non-woven pile fabric Pilling resistance propertiesCCBBB Colourlight B B B B A related rubbing wet B B B B B properties rubbing dry B B B B B water A A A A A a Pile fabrics include flocked and non-woven fabrics. b Different levels of revolutions for

29、 abrasion resistance are applied to figured weaves because of the raised surface. c Minimum level. Product profile classification LD GD HD GC SC Physical BBBBB strength Burst strength properties Abrasion resistance propertiesBBBBB 15 000 a 20 000 a 25 000 a 25 000 a 30 000 a Pilling resistance prope

30、rtiesCCBBB light B B B B A Colour related rubbing wet B B B B B properties rubbing dry B B B B B water A A A A A a Minimum level.BS 2543:2004 BSI 15 September 2004 3 Table 3 Performance levels for additional properties for product profile classification of cut pile woven and flocked fabrics not incl

31、uded in BS EN 14465:2003 6 Marking Fabrics shall be supplied with the following information, e.g. on a label or swing ticket: a) the number and date of this British Standard, i.e. BS 2543:2004; b) the designated product profile classification of the fabric as given in Clause 4. Product profile class

32、ification LD GD HD GC SC Pile retention Test procedure properties Pile loss reverse Annex A, A.1 AAAAA Surface pile loss Annex A, A.2 BBBBB Surface pile loss Annex A, A.2 B for flocked fabrics Wet and dryBS 2543:2004 4 BSI 15 September 2004 Annex A (normative) Test methods for cut pile woven fabric

33、and flocked fabrics not included in BS EN 14465:2003 NOTE See Table 3. A.1 Method of test for pile tuft and/or fibre loss by reverse abrasion Carry out the test in accordance with the test detailed in BS EN ISO 12947-2 with a pressure of 12 kPa 3 kPa, with the following modifications. a) Interchange

34、 the positions of the fabric test specimens and the reference abradant. Mount the test specimens 150 mm square or 150 mm in diameter over the backing felt on the abrading table, with the face of each specimen in contact with the felt, and mount the 38 mm diameter pieces of reference abradant in the

35、specimen holders over the disc of polyetherurethane foam in all cases. b) Carry out the test for 5 000 cycles then remove the test specimens. Place them face downwards on a laboratory light-box or over a similar source of illumination. Assess the pile loss against the scale given in Table A.1 NOTE R

36、emoval of pile tufts is manifested by transmission of light through any holes produced. c) Reverse the test specimens and assess the effect of the test on the face of the fabric against the scale given in Table A.1. A.2 Method of test for scuffing (surface pile loss) A.2.1 General Carry out the test

37、 in accordance with BS 4655:1986 with the modifications shown in A.2.2 to A.2.5. A.2.2 Principle The face side of a fabric, which is supported over a piece of reference abradant fabric is rubbed, under controlled conditions, by the edge of a metal disc. The test is intended to assess the tendency of

38、 all types of cut or non-loop pile upholstery to lose substantially complete lengths of pile from the surface of the fabric. To the extent that this tendency generally requires a harsh abrasive force from a relatively keen edged object, it often relates to minor unspecified abuse of the upholstery.

39、A.2.3 Apparatus The finger of the testing device is replaced by a similar attachment containing a slot that is capable of accommodating a metal disc having the material properties and dimensions of an unused 2 pence coin (7), allowing the disc to project forward from the face of the attachment and t

40、o subtend an angle of 45 to the plane of the platform (see Figure A.1). The disc is rotated through 90 immediately on completion of a test on one specimen to present an unused quadrant. When four such tests have been carried out the disc may be reversed to enable four more tests to be performed. Aft

41、er eight tests have been completed, the disc is replaced by a new one. A.2.4 Preparation of test specimens Select warpwise and weftwise specimens such that in the case of the following types of fabric representative areas of pattern or pile are tested: a) multi-patterned fabrics; b) figured velvets;

42、 c) fabrics containing mixtures of “V” and “W” tufts; d) other varying types of pile. In the case of figured velvets, representative areas include maximum available areas of uninterrupted pile and, in the case of velvets containing patterned and plain areas, parts of the pattern containing the large

43、st areas of plain pile available are sampled, as well as patterned areas. Where more than one area needs to be tested, the test is carried out on three test specimens from each area.BS 2543:2004 BSI 15 September 2004 5 A.2.5 Procedure Mount the test specimen face side uppermost over a similar sized

44、piece of reference abradant fabric as described in 3.3 of BS 4655:1986. Position the abradant fabric with its expanded PVC face uppermost, i.e. in contact with the test specimen. Position both the specimen and the abradant fabric with their longest edges parallel to the longitudinal axis of the plat

45、form of the testing device such that the direction of the lay of the pile is away from the tension wheel. Secure both fabrics at the mounting pins and tension wheel ends of the testing device. For fabrics other than flocked pile fabrics, after 30 rub cycles have been applied (i.e. 30 movements in ea

46、ch direction), raise the movable arm of the testing device to assess the effect on the pile. For flocked pile fabrics, test both dry and wet specimens. Test dry specimens for 60 rub cycles. Prepare wet specimens by immersing fresh dry specimens in water and allowing each to drain until it contains i

47、ts own mass of water. Transfer the specimen immediately to the testing device and subject to 15 rub cycles. After testing, assess the specimens as indicated in Table A.1. Table A.1 Ratings for pile loss and for scuffingA.3 Test report Record the pile or fibre loss rating, with an indication of the t

48、est specimen direction (e.g. warpwise or weftwise) appropriate to each result. If a test result in one specific area of the sample is rated significantly higher than that in the remaining areas, mention it in the report. Additionally, in the case of patterned velvets, indicate in the report whether

49、the loss of pile is restricted to, or is more noticeable on, specific areas of pattern. NOTE In assessing the significance of the results, it should be noted that pile loss will occur more easily on test specimens which have lost pile fibre generally due to abrasive wear. Thus, a velvet with a relatively low abrasion test result (A.1) can lose pile tufts rather more quickly in use than one which is more resistant to attritive forms of abrasive wear. Pile l