BOCA IMC-2000-2000 International Mechanical Code《国际机械码》.pdf

《BOCA IMC-2000-2000 International Mechanical Code《国际机械码》.pdf》由会员分享，可在线阅读，更多相关《BOCA IMC-2000-2000 International Mechanical Code《国际机械码》.pdf（121页珍藏版）》请在麦多课文档分享上搜索。

1、Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-T37 CODE COUNCIL. Copyright Building Officials and Code Administrators International Inc. Provided by IHS

2、under license with BOCANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-ICC IMC-2000-ENGL 2000 W 3q75878 O003633 773 W First Printing Publication Date: December 1999 ISBN # 1-892395-33-9 COPYRIGHT O 1999 by INTERNATIONAL CODE COUNCIL. INC ALL RIGHTS RESERVED. T

3、his 2000 International Mechanical Code is a copyrighted work owned by the International Code Council, Inc. Without advance written permission from the copyright owner; no part of this book may be reproduced, distribirted, or transmitted in any form or by any means, including, without limitation, ele

4、ctronic, optical or mechanical means (by way of example and not limitation, photocopying, or recording by or in an information storage retrieval sJvtem). For inforniution on permission to copy material exceeding .fair use, please contact: President, International Code Council, 5203 Leesburg Pike, Su

5、ite 708, Falls Church, Virginia 22041- 3401. (Phone 703-931-4533). Trademarks: “lnternationul Code Council,” the “International Code Council logo and the “International Mechunicul Code I are trademarks of the International Code Council, lnc. The “BOCA” logo is a trademark of Building 0ficiaI.s and C

6、ode Administrutors International, Inc. The “ICBO” logo is a trademark ofthe International Conferente of Building Oficials. The “SBCCI” logo is a trademark ($the Southern Building Code Congress International, Inc. Published in cooperation with: BUILDING OFFICIALS AND CODE ADMINISTRATORS INTERNATIONAL

7、, INC. 4051 West Flossmoor Road Country Club Hills, Illinois 60478-5795 (800) 214-4321 INTERNATIONAL CONFERENCE OF BUILDING OFFICIALS 5360 Workman Mill Road Whittier, California 90601-2298 (800) 284-4406 SOUTHERN BUILDING CODE CONGRESS INTERNATIONAL. INC 900 Montclair Road Birmingham. Alabama 352 13

8、- 1206 (205) 591-1853 PRINTED IN THE U.S.A. Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-ICC IMC-2000-ENGL 2000 3975898 U0Olb39 BOT m PREFACE Intro

9、duction Internationally, code officials recognize the need for a modem, up-to-date mechanical code addressing the design and installation of me- chanical systems through requirements emphasizing performance. The International Mechanicd Code, in this third edition, is designed to meet these needs thr

10、ough model code regulations that safeguard the public health and safety in all communities, large and small. This comprehensive mechanical code establishes minimum regulations for mechanical systems using prescriptive and performance- related provisions. It is founded on broad-based principles that

11、make possible the use of new materials and new mechanical designs. Addi- tionally, the International Mechanical Code is designed to be compatible with the entire family of international Codes published by the In- ternational Code Council. The International Mechanical Code provides many benefits, amo

12、ng which is the model code development process that offers an inter- national forum for mechanical professionals to discuss performance and prescriptive code requirements. This forum provides an excellent arena to debate proposed revisions. This model code also encourages international consistency i

13、n the application of provisions. Development The first edition of the International Mechanical Code was published in 1996 after an extensive process of selection, coordination and ar- rangement of numerous considerations and initial preparations by a development committee appointed by and consisting

14、 of representa- tives of BOCA, ICBO and SBCCI. The intent was to draft a comprehensive set of regulations for mechanical systems consistent with and inclusive of the scope and content of the existing model mechanical codes which incorporate the common mechanical code format estab- lished by the Coun

15、cil of American Building Officials. This format establishes the title, scope, and sequence of the chapters and does not in- volve the order or content of the provisions within the chapter. Technical content of the latest mechanical codes promulgated by BOCA, ICBO and SBCCI was utilized as the basis

16、for the develop- ment of this code. While there were a great many similarities among the three codes, careful consideration was given to identified differ- ences. The principles utilized in the original development of this code were based on the intent to establish provisions consistent with the sco

17、pe of a mechanical code that adequately protects public health, safety and welfare; provisions that do not unnecessarily increase con- struction costs; provisions that do not restrict the use of new materials, products or methods of construction; and provisions that do not give preferential treatmen

18、t to particular types or classes of materials, products or methods of construction. This third edition incorporates ap- proved changes to the 1998 edition from the 1998 and 1999 ICC Code Development Cycles. Marginal Markings Solid vertical lines in the margins within the body of the code indicate a

19、change from the requirements of the 1998 edition except where a change was minor. Deletion indicators (e) are provided in the margin where aparagraph or item listing has been deleted if the deletion re- sulted in a change of requirements. Letter Designations in Front of Section Numbers In each code

20、development cycle, proposed changes to this code are considered at the First Public Hearing by the International Mechanical Code Development Committee, whose action constitutes a recommendation to the voting membership for final action on the proposed change. Proposed changes to a code section whose

21、 number begins with a letter in brackets are considered by a different code development committee. For instance, proposed changes to code sections which have the letter FI in front (e.g., FI 502.2), are considered by the Inter- national Fire Code Development Committee at the First Public Hearing. Wh

22、ere this designation is applicable to the entire content of a main section of the code, the designation appears at the main section number and title and is not repeated at every subsection in that section. The content of sections in this code which begin with a letter designation are maintained by a

23、nother code development committee in ac- cordance with the following: BI = International Building Code Development Committee; FI = International Fire Code Development Committee; PMI = International Property Maintenance Code Development Committee; PI = International Plumbing Code Development Committe

24、e; RBE = International Residential Code Building and Energy Development Committee; RMP = International Residential Code Mechanical/Plumbing Development Committee; E = International Energy Conservation Code Development Committee; and EL = ICC Electrical Code Development Committee. Adoption The intern

25、ational Mechanical Code is available for adoption and use by jurisdictions internationally. Its use within a governmentaljuns- diction is intended to be accomplished through adoption by reference in accordance with proceedings establishing the jurisdictions laws. At the time of adoption, jurisdictio

26、ns should insert the appropriate information in provisions requiring specific local information, such as the name of the adopting jurisdiction. These locations are shown in bracketed words in small capital letters in the code and in the sample adoption ordinance. The sample adoption ordinance on pag

27、e v addresses several key elements of a code adoption ordinance, including the information required for insertion into the code text. 2000 INTERNATIONAL MECHANICAL CODE iii Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo

28、 reproduction or networking permitted without license from IHS-,-,-STD-ICC IMC-2000-ENGL ZOO0 M 3475898 000Lb35 74b Maintenance The Internurional Mechanical Code is kept up to date through the review o proposed changes submitted by code enforcement officials. in- dustry representatives, design profe

29、ssionals and other interested parties. Proposed changes arc carefully considered through an open code development process in which all interested and affected parties may participate. The contents of this work are subject to change both through the Code Development Cycles and the governmental body t

30、hat enacts the code into law. For more information regarding the code development process, contact: BOCA, ICBO or SBCCI. While the development procedure of the Internatinna Mechanical Code assures the highest degree of care, BOCA, ICBO, SBCCI, their members and those participating in the development

31、 of this code do not accept any liability resulting from compliance or noncoinpli- ance with the provisions because BOCA, ICBO and SBCCI do not have the power or authority to police or enforce compliance with the contents of this code. Only the governmental body that enacts the code into law has suc

32、h authority. 2000 INTERNATIONAL MECHANICAL CODE Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-ICC IflC-2000-ENGL 2000 E 3475898 0001b3b bA2 SAMPLE O

33、RDINANCE FOR ADOPTION OF THE INTERNATIONAL MECHANICAL CODE ORDINANCE NO. An ordinance of the JURISDICTION adopting the 2000 edition of the International Mechanical Code, regulating and controlling the design, construction, quality of materials, erection, installation, alteration, repair, location, r

34、elocation, replacement, addition to, use or maintenance of mechanical systems in the JURISDICTION ; providing for the issuance of permits and collection of fees therefore; repealing Ordinance No. of the uRlSDlcTloN and all other ordinances and parts of the ordinances in conflict therewith. The GOVER

35、NING BODY Of the JURISDICTIONL does ordain as follows: Section 1. That certain documents, three (3) copies of which are on file in the office of the JURISDICTIONS KEEPER OF RECORDS and the JJURICDICTION , being marked and designated as the International Mechanical Code, including Appendix Chapters f

36、ill in the applicable Appendix Chapters. (See International Mechanical Code Section 101.2.1,2000 edition), as published by the In- ternational Code Council, be and is hereby adopted as the code of the JuRisDiCTioNLfor regulating the design, construction, qual- ity of materiais, erection, installatio

37、n, alteration, repair, location, relocation, replacement, addition to, use or maintenance of mechanical systems in the JURISDICTION and providing for the issuance of permits and collection of fees therefore; and each and all of the regulations, provisions, conditions and terms of such International

38、Mechanical Code, 2000 edition, published by the In- ternational Code Council, on file in the office of the JURISDICTION are hereby referred to, adopted and made a part hereof as if fully set out in this ordinance. Section 2. The following sections are hereby revised: Section 1 O I. 1. Insert: NAME O

39、F JURISDICTION Section 106.5.2. Insert: APPROPRIATE SCHEDULE Section 1063.3. Insert: PERCENTAGES IN TWO LOCATIONS Section 108.4. Insert: OFFENSE, DOLLAR AMOUNT, NUMBER OF DAYS Section 108.5. Insert: DOLLAR AMOUNT IN TWO LOCATIONS Section 3. That Ordinance No. of JURISDICTIONL entitled (fir in here t

40、he complete title of the present mechanical ordi- nance or ordinances in effect at the present time so that they will be repealed by definite mention) and ail other ordinances or parts of ordinances in conflict herewith are hereby repealed. Section 4. That if any section, subsection, sentence, claus

41、e or phrase of this ordinance is, for any reason, held to be unconstitu- tional, such decision shall not affect the validity of the remaining portions of this ordinance. The GOVERNING BODY hereby de- clares that it would have passed this ordinance, and each section, subsection, clause or phrase ther

42、eof, irrespective of the fact that any one or more sections, subsections, sentences, clauses and phrases be declared unconstitutional. Section 5. That the JURISDICTIONS KEEPER OF RECORDS is hereby ordered and directed to cause this ordinance to be published. (An additional provision may be required

43、to direct the number of times the ordinance is to be published and to specify that it is to be in a newspaper in general circulation. Posting may also be required.) Section 6. That this ordinance and the rules, regulations, provisions, requirements, orders and matters established and adopted hereby

44、shall take effect and be in full force and effect TIME PERIOD from and after the date of its final passage and adoption. 2000 INTERNATIONAL MECHANICAL CODEQ V Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo reproduction

45、or networking permitted without license from IHS-,-,-vi 2000 INTERNATIONAL MECHANICAL CODE Copyright Building Officials and Code Administrators International Inc. Provided by IHS under license with BOCANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-ICC IMC-200

46、0-ENGL 2000 3475878 000Lb38 q55 = CHAPTER 1 ADMINISTRATION 1 Section 101 General . 1 102 Applicability . 1 103 104 Department of Mechanical Inspection . 1 Duties and Powers of the Code Official 2 105 Approval 2 106 Permits 3 107 Inspections and Testing . 4 108 Violations . 5 109 Means of Appeal 6 CH

47、APTER 5 EXHAUST SYSTEMS . 31 Section 501 General 31 502 Required Systems 31 503 Motors and Fans . 37 504 Clothes Dryer Exhaust 37 505 Domestic Kitchen Exhaust 506 Commercial Kitchen Grease Ducts 507 508 509 5 10 Equipment 38 and Exhaust Equipment 38 Commercial Kitchen Hoods 41 Commercial Kitchen Mak

48、eup Air. . 43 Fire Suppression Systems 43 Hazardous Exhaust Systems 43 5 11 Dust. Stock and Refuse Conveying CHAPTER 2 DEFINITIONS. 9 Systems 45 Section 201 General . 9 202 General Definitions 9 5 12 5 13 Subslab Soil Exhaust Systems . 46 Smoke Control Systems . 46 CHAPTER 6 DUCT SYSTEMS . 51 Sectio

49、n CHAPTER 3 GENERAL REGULATIONS 19 Section 301 General 19 302 Protection of Structure 20 303 Equipment and Appliance Location 20 304 Installation 21 305 PipingSuppo rt . 22 306 Access and Service Space 22 307 Condensate Disposal 23 308 Clearance Reduction 24 309 Temperature Control 25 Explosion Venting 25 Smoke and Heat Vents . 25 Heating and Cooling Load Calculations . 25 3 10 31 1 3 12 C