AWS QC5-1991 Standard for Certification of Welding Educators《焊接教员鉴定标准》.pdf

《AWS QC5-1991 Standard for Certification of Welding Educators《焊接教员鉴定标准》.pdf》由会员分享，可在线阅读，更多相关《AWS QC5-1991 Standard for Certification of Welding Educators《焊接教员鉴定标准》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 I AWS aC*5 91 m 07842b5 05028L Tb m bYWOrdS - AWS certified welding educator, training institutions, verification AWS QC 5-91 Standard for Certification Welding Educators Prepared by AWS Qualification and Certification Committee Under the Direction of AWS Education and Certification Council Approve

2、d by AWS Board of Directors April 1991 Abstract This Standard describes a program directed by the American Welding Society for the certification of Welding Educators. A American Welding Society 550 N.W. LeJeune Road, Miami, Florida 33126 AWS QC*5 91 0784265 0502820 bLB Statement on Use of AWS Standa

3、rds Ali standards (codes, specifications, recommended practices, methods, classifications and guides) of the American Welding Society are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute. When AWS standards are either in

4、corporated in, or made a part of, documents that are included in federal, or state laws and regulations, or the regulations of other government bodies, their provisions carry the full legal authority of the statute. In such cases, changes in those AWS standards must be approved by the governmental b

5、ody having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requ

6、irement of an AWS standard must be by agreement between the contracting parties. International Standard Book Number: 0-87171-371-3 American Welding Society, 550 N.W. LeJeune Road, Miami, Florida, 33126 “1991 by American Welding Society. All rights reserved Printed in the United States of America n .

7、Jte: The primary purpose of AWS is to serve and benefit its members. To this end, AWS provides a forum for the exchange, consideration, and discussion of ideas and proposals that are relevant to the welding industry and the consensus of which forms the basis for these standards. By providing such a

8、forum, AWS does not assume any duties to which a user of these standards may be required to adhere. By publishing this standard, the American Welding Society does not insure anyone using the information it contains against any liability arising from that use. Publication of a standard by the America

9、n Welding Society does not carry with it any right to make, use, or sell any patented items. Users of the information in this standard should make an independent investigation of the validity of that information for their particular use and the patent status of any item referred to herein. With rega

10、rd to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered. However, such opinions represent only the personal opinions of the particular individuals giving them. These individuals do not speak on behalf of AWS, nor do these oral opinions constitute offic

11、ial or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation. This standard is subject to revision at any time by the AWS Qualification and with technical and ethical principles. The Welding Educat

12、or should be able to work with the school administrator or a welder with ease and an appreciation of the role of each. The AWS program for the certification of Welding Educators has been developed to define minimum standards for welding educators and to provide a means of recognition for those who d

13、emonstrate that they have the skills, knowledge, and experience in the field of welding education. Comments and suggestions for improvement are welcome. They should be sent in writing to the Secretary, AWS Qualification and Certification Committee, American Welding Society, 550 N.W. LeJeune Road, Mi

14、ami, FL 33126. iv AWS QCX5 91 D 0784265 0502823 327 D Table of Contents Page No . Personnel . iii Foreword . iv 1 . Scope . 1 2 . Levels of Certification 1 3 . Definitions 1 4 . Function . 1 5 . Education and Experience Requirements 2 Examination Requirements 3 7 . Certification 3 8 . Code of Ethics

15、 . 3 6 . . 9 . Revocation 4 10 . Reinstatement 4 11 . Recertification (Renewal) 4 V AWS QC+5 91 m 0784265 0502824 2b3 m AWS QC 5191 AWC Standard for Certification of Welding 1. Scope 1.1 This standard establishes the requirements for the AWS certification of Welding Educators, describes how personne

16、l are qualified, and outlines the principles of conduct and practice by which certification may be maintained. 1.2 In the certification process, the AWS conducts examinations which verifies a persons skill and know- ledge of welding fabrication and requires documen- tation of their teaching skills.

17、1.3 It shall be the responsibility of the employer to determine that a person is capable of performing the duties involved in their welding educator assignment. 1.4 This standard is intended to supplement the require- ments of an employer, or of state regulations; it shall not be construed as a pree

18、mption of the employers responsibility for the work or for the performance of the work. 2. Levels of Certification A Certified Welding Educator (CWE) is a person certified by AWS as having met the qualification requirements of 5.1 and section 6. This shall be the only level of certification of Weldi

19、ng Educators. 3. Definitions %rms used in this Standard are defined as follows: Acceptance Criteria. Specified limits placed on one characteristic of an item or process defined in codes, standards or other contract requirement documents. Applicant. A person who applies to the AWS for certification.

20、AWS. The American Welding Society Certificate. A document issued to the candidate on successful completion of the requirements for certification. Certification. The act of determining, verifying, and attesting in writing to the qualification of personnel in accordance with specified requirements. Fa

21、brication. To construct or manufacture to a specification. Inspection. Examination or measurement to ver- ify whether an item or activity conforms to specified requirements. Inspector. A person who performs an inspec- tion function to verify conformance to specified requirements. Ed ucators Other Te

22、rms. All other terms used herein are defined by ANSUAWS A3.0, Standard Welding Terms and Definitions. QdkC Committee. The Qualification and Certifi- cation Committee of the American Welding Society. Q the word should denotes a guideline; and the word may denotes a choice. Training Institution. Organ

23、izations which train people for employment in the field of welding. This in- cludes for fee organizations open to the public or in- house training organizations who train only their own employees. Verification. The act of reviewing, inspecting, testing, checking, auditing or otherwise determining an

24、d documenting whether items, processes, services, or documents conform to specified requirements. Weldment. An assembly whose component parts are joined by welding. 4. Function The Welding Educator has the responsibility to direct and perform operations associated with welder train- ing and classroo

25、m instruction. The activities begin be- fore instruction and continue through the instruction process and do not end until both the students and in- struction process have been evaluated. Each employer is responsible for defining the specific duties of a Weld- ing Educator in the respective place of

26、 employment. The AWS Certified Welding Educator shall be able to dem- onstrate the capability of performing the tasks defined in this standard. The tasks of a Welding Educator include, but are not limited to: 4.1 Welding Codes, Drawings and Specifications. The Welding Educator shall be capable of re

27、ading and AWS OC15 91 - 078Y2b5 0502825 LTT 2 explaining typical welding codes, drawings, and specifi- cations. This requires a knowledge of welding symbols and of welding definitions and terminology. 4.2 Base Material and Welding Materials. The Welding Educator instructs students on base materials

28、and their weldability characteristics and on welding filler metal types and characteristics. 4.3 Welding Equipment. The Welding Educator conducts instruction on the characteristics and opera- tion of various power sources and other related equip- ment, provides basic safety instruction in the use of

29、 the equipment, troubleshoots and demonstrates the proper use of equipment. 4.4 Welding Skills. The Welding Educator shall be qualified per AWS or equal standards with the welding processes to be taught. 4.5 Review of Welding Instructions. The Welding Educator shall review the written welding instru

30、ctional materiais to determine that they comply with the appro- priate code or standard. The Welding Educator may write new welding instruction or lesson plans and shall be able to perform all testing required to qualify weld- ing students. 4.6 Evaluation of Welder lhining. The Welding Educator eval

31、uates the performance of welding students to verify that they are properly trained and qualified in accordance with the applicable welding procedures. The Welding Educator reviews and verifies that the work being performed follows the instructions. 4.7 Inspection. The Welding Educator performs visua

32、l inspections of the “in-process” and completed weldments to confirm that they comply with the documents. 4.8 Reports. The Welding Educator prepares clear and concise reports of the reviews, inspection results, and performance data. 4.9 Welding Safety. The Welding Educator instructs welding safety i

33、n accordance with ANSVASC 249.1, Safety in Welding and Cutting (published by the Ameri- can Welding Society) and with Occupational Safety and Health Administrative Rules as written in the Code of Federal Regulations (CFR) and other approved safe practices. 5. Education and Experience Requirements Th

34、e following applies to each applicant for certifica- tion as a Certified Welding Educator (CWE): 5.1 The applicant shall be a high school graduate; or hold a state or military approved high school equivalency diploma. 5.2The applicant shall have no less than five years experience in an occupational

35、function that has a direct relationship to weldments fabricated to a code or stan- dard and shall be directly involved in one or more of the fol1owing:z (1) Production. Planning and control of welding materials, welding procedures and welding operations for weldments. (2) Construction. Welding, fabr

36、ication and erection of weldments. (3) Inspection. Detection and measurements of weld discontinuities and the verification of fabrication requirements. (4) Repair. Repair of welds that were found to be defective. 5.3 The applicant shall submit written verification of documented employment with the a

37、pplication. This verification shall be completed and signed by the ap- plicants most recent employment supervisor or the ap- propriate personnel department staff. 5.4 The applicant shall be able to explain and demon- strate the welding and cutting processes to be taught. 5.5 The applicant shall be t

38、horoughly familiar and capable of performing the duties described in section 4, Function. 1. Acceptable Alternatives to 5.1 and 5.2. with support- ing documentation (e.g., copies of transcripts, letters of refer- ence, etc., which specify credited hours of training, quarter hours or semester hours):

39、 (a) A maximum of two years of post high school education may be substituted for an equal number of years of the required five years experience, provided the studies were relevant to any of the functions covered in 5.2. Credits are given as follows: %o years maximum in engineering technology, engine

40、ering, physics or sciences. (b) Engineering/echnical School courses. Wo years maximum of successfully completed courses in a curriculum can be applied to (a) above. (c) hde/Vocational Courses. One year maximum of successfully completed courses in a curriculum related to welding can be applied to (a)

41、 above. “Courses in the curriculum” means courses within a body of courses offered toward a degree, or which can be applied to a degree in (1) above. “Successfully com- pleted courses” means a completed quarter or semester with credit in that course. Documentation of the num- ber of actual hours com

42、pleted is necessary. 2. Relevant teaching experience may be substituted for two years of the five years experience requirement with proper documentation (e.g., photocopied summaries of sub- jects taught, teaching certificates, and letters of reference). Relevant experience shall be considered on the

43、 foilowing basis: Full time teaching of the occupational skill of welding or of subjects related to welding, its application, its control, and its materials and processes in a secondary or post secondary institution. AWS 6. Examination Requirements The following applies to a CWE Applicant: 6.1 The a

44、pplicant shall pass a written examination on fundamental welding principles including welding processes, nondestructive testing processes, safety, basic welding metallurgy, welding symbols, print reading, equipment, process/equipment trouble-shooting, and basic arithmetic or have passed either the C

45、WI or CAWI Closed Book examination. 6.2 The applicant shall pass a test on practical weld- ing inspection including determining qualification stan- dards from a code or specification or have passed either the CWI or CAWI Practical examination. 6.3 The applicant shall have a valid AWS Certified Welde

46、r ID/Certification card or its equal, or shall pass a valid AWS Certified Welder test, for the welding process to be taught. 6.4 The applicant shall furnish evidence of having met the instructional methods requirements of the appli- cants school, college, or training institution. Evidence shall also

47、 be furnished of successful classroom and laboratory instruction. This shall consist of written evaluation by the applicants administrator and recom- mendation that the applicant be recognized as an AWS Certified Welding Educator. 7. Certification The American Welding Society shall issue to each CWE

48、 applicant who complies with the requirements of sections 5.1 and 6, as applicable, a serialized (unique number) certificate and a wallet card stating that the applicant has met the AWS certification requirements. Certification shall be valid for four years unless revoked for reasons defined in 8.6

49、and section 9, Revocation. The certificate shall indicate the date of certification. The wallet card shail incidate the expiration date of cer- tification. 8. Code of Ethics Certified Welding Educator (CWE) Preamble: In order to safeguard the health and well- being of the public and to maintain integrity and high standards of skills, practice and conduct in the occu- pation of welding educator, the American Welding Society CWE shall be cognizant of the following prin- ciples and the scope to which they apply with the understanding that any unauthorized pract