ASTM E1338-2009 Guide for Identification of Metals and Alloys in Computerized Material Property Databases《计算机化材料特性数据库的金属和合金的识别指南》.pdf

《ASTM E1338-2009 Guide for Identification of Metals and Alloys in Computerized Material Property Databases《计算机化材料特性数据库的金属和合金的识别指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM E1338-2009 Guide for Identification of Metals and Alloys in Computerized Material Property Databases《计算机化材料特性数据库的金属和合金的识别指南》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E1338 09Standard Guide forIdentification of Metals and Alloys in Computerized MaterialProperty Databases1This standard is issued under the fixed designation E1338; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the ye

2、ar of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide covers the identification of metals and alloysin computerized material property databases. It establi

3、shesessential and desirable data elements that serve to uniquelyidentify and describe a particular metal or alloy sample as wellas properties that identify a given metal or alloy in general.1.1.1 This guide does not necessarily provide sufficient dataelements to describe weld metal, metal matrix com

4、posites, orjoined metals.1.1.2 The data element identified herein are not all germaneto every metal or alloy group.1.1.3 Different sets of data elements may also be appliedwithin a given metal or alloy group depending on conditions orapplications specific to that metal or alloy group. Further,within

5、 a particular metal or alloy group, different sets of dataelements may be used to identify specific material conditions.1.1.4 Table 1 on Recommended Data Elements and Tables2-17 on values for specific data elements appear at the end ofthis guide.1.2 Some of the data elements in this guide may be use

6、fulfor other purposes. However, this guide does not attempt todocument the essential and desirable data element for anypurpose except for the identification of metals and alloys incomputerized material property databases. Other purposes,such as material production, material procurement, and mate-ria

7、l processing, each may have different material data reportingrequirements distinct from those covered in this guide. Aspecific example is the contractually required report for amaterial property testing series. Such a report may not containall the data elements considered essential for a specificcom

8、puterized database; conversely, this guide may not containall the data elements considered essential for a contracted testreport.1.3 Results from material tests conducted as part of theprocurement process are often used to determine adherence toa specification. While this guide includes a number of

9、testresult data elements, such data elements are included in thisguide only for the purposes of material identification.1.4 Reporting of contracted test results, such as certificationtest results, shall follow the requirements described in thematerial specification, or as agreed upon between the pur

10、chaserand the manufacturer.1.5 This guide contains a limited number of data elementsrelated to material test results. These data elements are formaterial identification purposes and are not intended to replacethe more detailed sets of data elements listed in guides such asGuide E1313 covering data r

11、ecording formats for mechanicaltesting of metals. For material identification purposes, the dataelements in this guide include typical, nominal, or summaryproperties normally derived from a population of individualspecimen tests. If warranted by the scope of a particulardatabase system, the system m

12、ight provide links between thematerial identification data elements given in this guide, andthe individual specimen test results recorded in accordancewith other guides corresponding to particular test methods.1.6 Material ClassesSee ANSI/AWS A9.1-92 for arcwelds, Guide E527 for Metal and Alloys in

13、the UnifiedNumbering System (UNS), Guide E1308 for polymers, GuideE1309 for composite material, and Guide E1471 for fibers,fillers, and core materials.2. Referenced Documents2.1 ASTM Standards:2E8 Test Methods for Tension Testing of Metallic MaterialsE8M Test Methods for Tension Testing of Metallic

14、Materi-als Metric3E380 Practice for Use of the International System of Units(SI) the Modernized Metric System31This guide is under the jurisdiction of ASTM Committee B08 onMetallic andInorganic Coatings and is the direct responsibility of Subcommittee B08.01 onAncillary Activities. This guide was de

15、veloped in cooperation with Committee B07on Light Metals and Alloys.Current edition approved Sept. 1, 2009. Published January 2010. Originallyapproved in 1990. Last previous edition approved in 2008 as E1338 97(2008).DOI: 10.1520/E1338-09.2For referenced ASTM standards, visit the ASTM website, www.a

16、stm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Withdrawn. The last approved version of this historical standard is referencedon www.astm.org.1Copyright ASTM Internation

17、al, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.TABLE 1 Recommended Data Elements for the Identification of Metals and AlloysNumberAData Element Descriptive Name Data Type Category Set, Value Set, or UnitsPrimary Identifiers1 Material class String metal2 Famil

18、y name String Category set in Table 23 Family subclass String Value set in Table 34BCommon nameCString5 Application groupCString6 Product groupCStringMaterial SpecificationC7BUNS Number String Category set defined in Practice E5278BSpecification organization String9BSpecification number String10BSpe

19、cification version String11BDesignation keywordCString Category set in Table 412BDesignation valueCStringComposition RequirementsC13 Element symbol String IUPAC symbol(s)14 Fraction type String mass, volume, or mole15 Composition units String % or ppm16 Minimum specified composition Real17 Maximum s

20、pecified composition RealMechanical Properties RequirementsTensile Test RequirementsC18 Orientation of tensile specimen for certification String Value set in Table 519 Location of tensile specimen for certification String Values set in Table 620 Tensile test temperature for certification Real C (F)2

21、1 Minimum ultimate tensile strength Real MPa (ksi)22 Maximum ultimate tensile strength Real MPa (ksi)23 Minimum yield strength Real MPa (ksi)24 Maximum yield strength Real MPa (ksi)25 Yield strength determination method String Category set in Table 726 Yield strength offset or extension Real %27 Min

22、imum elongation Real %28 Maximum elongation Real %29 Original gage length Real mm (in.)30 Minimum reduction of area Real %31 Maximum reduction of area Real %Hardness RequirementsC32 Location of hardness measurement for certification String Value set in Table 633 Minimum hardness Real34 Maximum hardn

23、ess Real35 Hardness scale String Category set in Table 8Charpy Impact Energy to Fracture RequirementsC36 Location of Charpy specimen for certification String Value set in Table 637 Temperature of Charpy test for certification Real C (F)38 Minimum Charpy impact energy Real J (ft-lbf)39 Maximum Charpy

24、 impact energy Real J (ft-lbf)Primary Material Producer40 Original producer String41 Country of origin String42 Producers facility String43 Production date Date44 Primary process type String45 Melt practice String Value set in Table 946 Cast practice String Value set in Table 1047BHeat number String

25、Material ProcessingC48 Processors name String49 Processors country String see ISO 316650 Processors facility name String51 Processors assigned production date Date52BProcess type String53 Process lot number StringHeat TreatmentCE1338 092TABLE 1 ContinuedNumberAData Element Descriptive Name Data Type

26、 Category Set, Value Set, or Units54 Thermal step type String55 Time of thermal step Real h56 Thermal step temperature Real C (F)57 Heating environment String Values set in Table 1158 Heating rate Real C/h (F/h)59 Cooling environment String Value set in Table 1260 Cooling rate Real C/h (F/h)Product

27、Detail61 Product forming method String Value set in Table 1362 Product identifier String63 Product shape String Value set in Table 1464 Product form String Value set in Table 1565 Dimension type String nominal or actual66 Length Real cm (in.)67 Width Real cm (in.)68 Thickness Real cm (in.)69 Outside

28、 diameter Real cm (in.)70 Wall thickness Real cm (in.)71 Weight Real kg (lb)72 Fabrication history String73 Service history StringMeasured Chemical CompositionC74 Source of chemical composition data String75 Element symbol String IUPAC symbol(s)76 Fraction type String mass, volume, or mole77 Composi

29、tion units String % or ppm78 Measured composition RealMeasured Mechanical PropertiesMeasured Tensile PropertiesC79 Source or basis for tensile properties String80 Orientation of test specimen String Value set in Table 581 Location of tensile specimen String Value set in Table 682 Tensile test temper

30、ature Real C (F)83 Ultimate tensile strength Real MPa (ksi)84 Number of tensile strength tests, if averaged Integer85 Yield strength Real MPa (ksi)86 Yield strength method String Category set in Table 787 Yield strength offset or extension Real %88 Number of yield strength tests, if averaged Integer

31、89 Total elongation Real %90 Original gage length Real mm (in.)91 Number of elongation tests, if averaged Integer92 Type of elongation String Value set in Table 1693 Reduction of area Real %94 Number of reduction of area tests, if averaged IntegerMeasured HardnessC95 Source or basis for hardness mea

32、surement String96 Location of hardness measurement String Value set in Table 697 Hardness value Real98 Hardness scale String Category set in Table 899 Number of hardness readings, if averaged IntegerMeasured Charpy Impact Energy to FractureC100 Source or basis for Charpy measurements String101 Locat

33、ion of Charpy specimen String Value set in Table 6102 Temperature of Charpy test Real C (F)103 Charpy specimen size String Category set in Table 17104 Charpy impact energy Real J (ft-lbf)105 Number of Charpy tests, if averaged IntegerMeasured Microstructure DescriptionsC106 Grain size measurement Re

34、al107 Scale for grain size String108 Basis for grain size String109 Description of microstructure StringAData element numbers are provided for information only.BEssential data element, as described in 4.6.CProvisions should be made in the database for repeated values of this data element, or for the

35、 set of data elements in this section.E1338 093E527 Practice for Numbering Metals and Alloys in theUnified Numbering System (UNS)E616 Terminology Relating to Fracture Testing (Discontin-ued 1996)3E1308 Guide for Identification of Polymers (Excludes Ther-moset Elastomers) in Computerized Material Pro

36、pertyDatabases (Discontinued 2000)3E1309 Guide for Identification of Fiber-ReinforcedPolymer-Matrix Composite Materials in DatabasesE1313 Guide for Recommended Formats for Data RecordsUsed in Computerization of Mechanical Test Data forMetals (Discontinued 2000)3E1443 Terminology Relating to Building

37、 and AccessingMaterial and Chemical Databases (Discontinued 2000)3E1471 Guide for Identification of Fibers, Fillers, and CoreMaterials in Computerized Material Property Databases2.2 Other Standards:TABLE 2 Category Set for Family Name as Listed in PracticeE527Aluminum and aluminum alloys Zinc and zi

38、nc alloysCopper and copper alloys Cast ironsRare earth and rare earth-like metals Cast steelsand alloys Carbon steelsLow melting point metals and alloys Alloy steelsNickel and nickel alloys AISI H-steelsPrecious metals and alloys Heat and corrosion-resistantReactive and refractory metals and (stainl

39、ess) steelsalloys Tool steelsCobalt alloysTABLE 3 Example Value Sets for Family Subclass Name forAluminum, Copper, Steel, and Other Metals and AlloysAluminum: Copper:Commercially pure aluminum CopperAluminum-copper alloy High copper alloyAluminum-manganese alloy Beryllium copperAluminum-silicon allo

40、y Chromium copperAluminum-manganese-silicon alloy Copper-zinc alloy (brass)Aluminum-magnesium alloy Copper-zinc-lead-alloy (leadedAluminum-magnesium-silicon alloy brass)Aluminum-zinc alloy Copper-zinc-tin alloy (tin brass)Other aluminum alloy Copper-tin-phosphorus alloy(phosphor bronze)Steel: Copper

41、-tin-lead-phosphorus alloyChromium-molybdenum (leaded phosphor bronze)Low carbonHigh carbonAusteniticFerriticMartensiticPrecipitation hardeningTABLE 4 Category Set for Designation KeywordGradeTypeCompositionTemperConditionClassTABLE 5 Value Set for Specimen OrientationUnnotched Specimen:Longitudinal

42、 (parallel to working direction)Transverse (perpendicular to working direction)Long transverseShort transverseTangenitalRadialDiagonal (to rolling direction)Cracked or Notched Specimen:See Terminology E616 for orientation codesTABLE 6 Value Set for Location Within ProductOuter surfaceInternalInside

43、surfaceSurfaceQuarter thicknessCenter of thicknessLeading edgeTrailing edgeTABLE 7 Category Set for Yield Strength Method (as explainedin Test Methods E8 or E8M)OffsetExtension under loadUpperLowerTABLE 8 Category Set for Hardness ScaleBrinellKnoopRockwell ARockwell BRockwell CRockwell ERockwell FSh

44、oreVickersRockwell 15tRockwell 30tRockwell 45tRockwell 15NRockwell 30NRockwell 45NTABLE 9 Value Set for Melt PracticeArgon oxygen decarburizationBasic oxygen furnaceOpen hearthElectric furnaceRemeltLadle refiningVacuum degassingVacuum arc remeltVacuum oxygen decarburizationVacuum induction meltingAi

45、r induction meltingElectroslag remeltElectroflux remeltElectron beam meltingReverbatory furnaceTABLE 10 Value Set for Cast PracticeContinuousIngotPowder metallurgySpinE1338 094ISO Standard: 3166 Codes for Representation of Names ofCountries Quantities, Units and Symbols in PhysicalChemistryIUPAC4ANS

46、I/AWS A9.1-92 Standard Guide for Describing ArcWelds in Computerized Material Property and Nonde-structive Examination Databases53. Terminology3.1 Computer-related technical terms in this guide aredefined in Terminology E1443.4. Significance and Use4.1 This guide describes the types of information t

47、hat areindispensable for uniquely identifying a metal or alloy in acomputerized database. The purpose is to facilitate standard-ized storage and retrieval of the information with a computer,and allow meaningful comparison of data from differentsources.4.2 Many numbering systems for metals and alloys

48、 havebeen developed which are based on their chemical composi-tions. Separate systems have also evolved to describe thethermomechanical condition of metals and alloys in order tonarrow their description. It is the separation into logical dataelements from these complex, historically significant, and

49、overlapping systems of identification that is the challenge inthe identification of metals and alloys within computerizeddatabases.4.3 This guide is intended to provide a common startingpoint for designers and builders of materials property data-bases. This guide generally identifies the contents of thedatabase in terms of data elements, but does not recommendany particular logical or physical database design. A databasebuilder has considerable flexibility in designing a databaseschema, and it is intended that this guide support that flexibil-ity.4.4 It is