ASTM D7976-2014 9072 Standard Specification for Purified Terephthalic Acid (PTA)《精对苯二甲酸 (PTA) 的标准规格》.pdf

《ASTM D7976-2014 9072 Standard Specification for Purified Terephthalic Acid (PTA)《精对苯二甲酸 (PTA) 的标准规格》.pdf》由会员分享，可在线阅读，更多相关《ASTM D7976-2014 9072 Standard Specification for Purified Terephthalic Acid (PTA)《精对苯二甲酸 (PTA) 的标准规格》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D7976 14Standard Specification forPurified Terephthalic Acid (PTA)1This standard is issued under the fixed designation D7976; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in paren

2、theses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers purified terephthalic acid(PTA) for use in the manufacturing of polymers. Someexamples include the production of polyesters

3、for fiber,filament, yarn, film, coating, bottle and resin applications.1.2 The following applies to all specified limits in thisspecification: for purposes of determining conformance withthis specification, an observed value or a calculated value shallbe rounded off to the nearest unit in the last r

4、ight-hand digitused in expressing the specification limit, in accordance withthe rounding-off method of Practice E29.1.3 The values stated in SI units are to be regarded asstandard. No other units of measurement are included in thisstandard.1.4 Consult current OSHA regulations, suppliers SafetyData

5、Sheets, and local regulations for all materials used in thisspecification.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine

6、 the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D7881 Test Method for Determination of4-Carboxybenzaldehyde and p-Toluic Acid in PurifiedTerephthalic Acid by Capillary Electrophoresis with Re-verse Voltage ModeD7882 Test Method for Determination

7、of4-Carboxybenzaldehyde and p-Toluic Acid in PurifiedTerephthalic Acid by Capillary Electrophoresis with Nor-mal Voltage ModeD7883 Test Method for Determination of4-Carboxybenzaldehyde and p-Toluic Acid in PurifiedTerephthalic Acid by Weak Anion Exchange High Perfor-mance Liquid ChromatographyD7884

8、Test Method for Determination of4-Carboxybenzaldehyde and p-Toluic Acid in PurifiedTerephthalic Acid by Reverse Phase High PerformanceLiquid ChromatographyE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE300 Practice for Sampling Industrial Chemicals

9、2.2 Other Documents:OSHA Regulations, CFR 29 paragraphs 1910.1000 and1910.120033. Terminology3.1 Definitions:3.1.1 purified terephthalic acid, n(C8H6O4) molecularweight, 166.13; white crystalline solid or powder; sublimes,402 to 404C; abbreviated as PTA (CAS #100-21-0).3.1.2 4-carboxybenzaldehyde, n

10、(C8H6O3) molecularweight, 150.13; white to yellow crystalline solid or powder;melting point, 247C; abbreviated as 4-CBA(CAS #619-66-9).3.1.3 p-toluic acid, n(C8H8O2) molecular weight, 136.15;white crystalline solid or powder; melting point, 180 to 181C;abbreviated as p-TOL (CAS #99-94-5).1This speci

11、fication is under the jurisdiction of ASTM Committee D16 onAromatic Hydrocarbons and Related Chemicals and is the direct responsibility ofSubcommittee D16.02 on Oxygenated Aromatics.Current edition approved Dec. 1, 2014. Published January 2015. DOI: 10.1520/D7976-14.2For referenced ASTM standards, v

12、isit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St.

13、, NW, Mail Stop: SDE, Washington, DC 20401, http:/www.access.gpo.gov.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States14. Properties4.1 PTA shall conform to the following requirements:Property Specification ASTM Test MethodA4-CBA, max,

14、mg/kg 25 D7881 or D7882 orD7883 or D78844-CBA plus p-TOL, max,mg/kg190 D7881 or D7882 orD7883 or D7884AIf more than one method is listed, the producer and user should agree on thereferee method.5. Sampling5.1 The material shall be sampled in accordance withPractice E300.6. Keywords6.1 purified terep

15、hthalic acid; p-toluic acid;4-carboxybenzaldehydeASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights

16、, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for re

17、vision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing yo

18、u shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be

19、 obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 142