ASHRAE 193 ERTA-2012 Method of Test for Determining the Air Tightness of HVAC Equipment.pdf

《ASHRAE 193 ERTA-2012 Method of Test for Determining the Air Tightness of HVAC Equipment.pdf》由会员分享，可在线阅读，更多相关《ASHRAE 193 ERTA-2012 Method of Test for Determining the Air Tightness of HVAC Equipment.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、2012 ASHRAE. All rights reserved. ERRATA SHEET FOR ANSI/ASHRAE STANDARD 193-2010 Method of Test for Determining the Air Tightness of HVAC Equipment February 16, 2012 The corrections listed in this errata sheet apply to ANSI/ASHRAE Standard 193-2010. The first printing is identified on the outside ba

2、ck cover as “Product Code: 86615 8/10” and the second printing as “Product Code: 86615 2/11Errata dated 1/31/11 have been incorporated.”. Shaded items have been added since the previously published errata sheet dated January 31, 2011 was distributed. Errata identified with an asterisk “*” apply only

3、 to the hard copy version of the first printing. Page Erratum 4 and 5* 6.2.1.4, 6.2.3.2, 6.2.3.4, 6.2.3.5. Math operator characters in the following equations did not print correctly. Corrections for Equations 16 appear below. 5 6.2.3.5. In Equation (6) in Section 6.2.3.5 remove the subscript “std” from the terms Qleak+, stdand Qleak-, std so the equation reads as follows: 6.2.3.5 Qleak= Qleak+ Qleak-(6)