ASCE 60-12-2013 Guideline for Development of Effective Water Sharing Agreements.pdf
《ASCE 60-12-2013 Guideline for Development of Effective Water Sharing Agreements.pdf》由会员分享,可在线阅读,更多相关《ASCE 60-12-2013 Guideline for Development of Effective Water Sharing Agreements.pdf(132页珍藏版)》请在麦多课文档分享上搜索。
1、 ASCE/EWRI 60-12ASCE STANDARDAmerican Society of Civil EngineersGuideline for Development of Effective Water Sharing AgreementsThis document uses both the International System of Units (SI) and customary units.Published by the American Society of Civil EngineersLibrary of Congress Cataloging-in-Publ
2、ication DataGuidelines for development of effective water sharing agreements / American Society of Civil Engineers.p. cm. (ASCE standard)“ASCE/EWRI 60-12.”“This document uses both the International System of Units (SI) and customary units.”Includes bibliographical references and index.ISBN 978-0-784
3、4-1230-5 (pbk. : alk. paper) ISBN 978-0-7844-7691-8 (ebook)1. WaterLaw and legislation. 2. Water rights (International law) 3. Water resources developmentLaw and legislation. I. American Society of Civil Engineers.K3496.G85 2012346.04691dc232012013748Published by American Society of Civil Engineers1
4、801 Alexander Bell DriveReston, Virginia 20191www.asce.org/pubsThis standard was developed by a consensus standards development process which has been accredited by the American National Standards Institute (ANSI). Accreditation by ANSI, a voluntary accreditation body representing public and private
5、 sector standards development organizations in the United States and abroad, signifi es that the standards development process used by ASCE has met the ANSI requirements for openness, balance, consensus, and due process.While ASCEs process is designed to promote standards that refl ect a fair and re
6、asoned consensus among all interested participants, while preserving the public health, safety, and welfare that is paramount to its mission, it has not made an independent assessment of and does not warrant the accuracy, completeness, suitability, or utility of any infor-mation, apparatus, product,
7、 or process discussed herein. ASCE does not intend, nor should anyone interpret, ASCEs standards to replace the sound judgment of a com-petent professional, having knowledge and experience in the appropriate fi eld(s) of practice, nor to substitute for the standard of care required of such professio
8、nals in interpreting and applying the contents of this standard.ASCE has no authority to enforce compliance with its standards and does not undertake to certify products for compliance or to render any professional services to any person or entity.ASCE disclaims any and all liability for any persona
9、l injury, property damage, fi nancial loss, or other damages of any nature whatsoever, including without limitation any direct, indirect, special, exemplary, or consequential damages, resulting from any per-sons use of, or reliance on, this standard. Any individual who relies on this standard assume
10、s full responsibility for such use.ASCE and American Society of Civil EngineersRegistered in U.S. Patent and Trade-mark Offi ce.Photocopies and permissions. Permission to photocopy or reproduce material from ASCE publications can be obtained by sending an e-mail to permissionsasce.org or by locating
11、 a title in ASCEs online database (http:/cedb.asce.org) and using the “Per-mission to Reuse” link.Copyright 2013 by the American Society of Civil Engineers.All Rights Reserved.ISBN 978-0-7844-1230-5 (paper)ISBN 978-0-7844-7691-8 (e-book)Manufactured in the United States of America.18 17 16 15 14 13
12、1 2 3 4 5iiiSTANDARDSIn 2006, the Board of Direction approved the revision to the ASCE Rules for Standards Committees to govern the writing and maintenance of standards developed by the Society. All such standards are developed by a consensus standards process managed by the Societys Codes and Stand
13、ards Committee (CSC). The consensus process includes balloting by a balanced standards committee made up of Society members and nonmem-bers, balloting by the membership of the Society as a whole, and balloting by the public. All standards are updated or reaffi rmed by the same process at intervals n
14、ot exceeding fi ve years.The following standards have been issued:ANSI/ASCE 1-82 N-725 Guideline for Design and Analysis of Nuclear Safety Related Earth StructuresASCE/EWRI 2-06 Measurement of Oxygen Transfer in Clean WaterANSI/ASCE 3-91 Standard for the Structural Design of Com-posite Slabs and ANS
15、I/ASCE 9-91 Standard Practice for the Construction and Inspection of Composite SlabsASCE 4-98 Seismic Analysis of Safety-Related Nuclear StructuresBuilding Code Requirements for Masonry Structures (ACI 530-02/ASCE 5-02/TMS 402-02) and Specifi cations for Masonry Structures (ACI 530.1-02/ASCE 6-02/TM
16、S 602-02)ASCE/SEI 7-10 Minimum Design Loads for Buildings and Other StructuresSEI/ASCE 8-02 Standard Specifi cation for the Design of Cold-Formed Stainless Steel Structural MembersANSI/ASCE 9-91 listed with ASCE 3-91ASCE 10-97 Design of Latticed Steel Transmission StructuresSEI/ASCE 11-99 Guideline
17、for Structural Condition Assessment of Existing BuildingsASCE/EWRI 12-05 Guideline for the Design of Urban Subsur-face DrainageASCE/EWRI 13-05 Standard Guidelines for Installation of Urban Subsurface DrainageASCE/EWRI 14-05 Standard Guidelines for Operation and Maintenance of Urban Subsurface Draina
18、geASCE 15-98 Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)ASCE 16-95 Standard for Load Resistance Factor Design (LRFD) of Engineered Wood ConstructionASCE 17-96 Air-Supported StructuresASCE 18-96 Standard Guidelines for In-Process Oxygen Tran
19、s-fer TestingASCE 19-10 Structural Applications of Steel Cables for BuildingsASCE 20-96 Standard Guidelines for the Design and Installation of Pile FoundationsANSI/ASCE/T Dellapenna 2007a). The format of the sections and subsections of each model agreement consists of statutory language in boldface
20、that a legislature could enact with or without change. This statutory language is followed by a commentary section that describes the purpose and scope of the statutory provisions. Cross-references to other provisions in the specifi c agreement follow. The section or subsection is closed by a paragr
21、aph listing other interstate and international water sharing agreements that contain similar provisions.Each section of each agreement is optional. Authorities may, however, enact the bulk of the agreement yet delete or change any particular section. Nonetheless, the WRSC made an effort to create a
22、complete, comprehensive, and well-integrated con-tract between the parties capable of effectively managing shared water. The WRSC has concluded that almost every section of each agreement is necessary to achieve that goal. Some sections apply, however, only to water sharing compacts within the Unite
23、d States, others only to an international agreement. Others are specifi cally denominated optional in any jurisdiction, which indicates that the drafters consider that these sections might not be necessary or appropriate to the needs of the specifi c situation. A coherent and workable agreement woul
24、d still result were all of the optional sections omitted. This Standard Guideline refers to current ASCE Policy Statements and to certain common refer-ences. ASCE Policy Statements normally are updated every three years and should be consulted for changes that may have occurred (www.asce.org/pressro
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASCE60122013GUIDELINEFORDEVELOPMENTOFEFFECTIVEWATERSHARINGAGREEMENTSPDF

链接地址:http://www.mydoc123.com/p-453940.html