ARMY UFGS-23 82 02 00 10-2008 UNITARY HEATING AND COOLING EQUIPMENT《统一供热和空调系统》.pdf

《ARMY UFGS-23 82 02 00 10-2008 UNITARY HEATING AND COOLING EQUIPMENT《统一供热和空调系统》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-23 82 02 00 10-2008 UNITARY HEATING AND COOLING EQUIPMENT《统一供热和空调系统》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-23 82 02.00 10 (April 2008)-Preparing Activity: USACE SupersedingUFGS-23 82 02.00 10 (January 2008)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated March 2008*SECTION TABLE OF CONTENTSDIVISION 23 - HEATING, VENTILATING, AND AIR C

2、ONDITIONINGSECTION 23 82 02.00 10UNITARY HEATING AND COOLING EQUIPMENT04/08PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 QUALITY ASSURANCE1.3.1 Drawings1.3.2 Electrical Work1.4 DELIVERY, STORAGE, AND HANDLING1.5 EXTRA MATERIALSPART 2 PRODUCTS2.1 MATERIALS AND EQUIPMENT2.1.1 Standard Products2.1.2 Na

3、meplates2.1.3 Safety Devices2.2 UNITARY EQUIPMENT, ROOM UNIT2.2.1 Window or Through-the-Wall Mounted Unit2.2.2 Packaged Terminal Unit2.2.3 Compressor2.2.4 Air-To-Refrigerant Coils2.2.5 Fans2.2.6 Air Filters2.2.7 Primary/Supplemental Heat2.2.8 Cabinet Construction2.2.9 Wall Sleeve2.2.10 Duct Package2

4、.2.11 Unit Controls2.3 UNITARY EQUIPMENT, PACKAGE SYSTEM2.3.1 Air-to-Refrigerant Coils2.3.2 Water-to-Refrigerant Coils2.3.3 Evaporatively-Cooled Section2.3.3.1 Pan Section2.3.3.2 Fan Section2.3.3.3 Condensing Coil2.3.3.4 Water Distribution SystemSECTION 23 82 02.00 10 Page 1Provided by IHSNot for Re

5、saleNo reproduction or networking permitted without license from IHS-,-,-2.3.3.5 Water Pump2.3.3.6 Drift Eliminator2.3.3.7 Evaporator Controls2.3.4 Compressor2.3.5 Refrigeration Circuit2.3.6 Unit Controls2.4 UNITARY EQUIPMENT, SPLIT SYSTEM2.4.1 Air-to-Refrigerant Coil2.4.2 Compressor2.4.3 Refrigerat

6、ion Circuit2.4.4 Unit Controls2.5 REMOTE CONDENSER OR CONDENSING UNIT2.5.1 Air-Cooled Condenser2.5.1.1 Connections2.5.1.2 Head Pressure Control and Liquid Subcooling2.5.1.3 Condensing Coil2.5.1.4 Unit Controls2.5.2 Evaporative Condenser2.5.2.1 Pan Section2.5.2.2 Fan Section2.5.2.3 Condensing Coil2.5

7、.2.4 Water Distribution System2.5.2.5 Water Pump2.5.2.6 Drift Eliminator2.5.2.7 Unit Controls2.5.3 Compressor2.6 AIR-CONDITIONERS FOR ELECTRONIC DATA PROCESSING (EDP) SPACES2.6.1 Air-to-Refrigerant Coils2.6.2 Water-to-Refrigerant Coils2.6.3 Compressor2.6.4 Refrigeration Circuit2.6.5 Unit Controls2.6

8、.5.1 Externally Accessible Controls2.6.5.2 Status Indicators2.6.5.3 Alarmed Conditions2.6.5.4 Space Temperature2.6.5.5 Safety Controls2.6.6 Cabinet Construction2.7 EQUIPMENT EFFICIENCY2.8 UNITARY EQUIPMENT COMPONENTS2.8.1 Refrigerant and Oil2.8.2 Fans2.8.3 Primary/Supplemental Heating2.8.3.1 Water C

9、oil2.8.3.2 Steam Coil2.8.3.3 Electric Heating Coil2.8.3.4 Gas-Fired Heating Section2.8.4 Air Filters2.8.4.1 Extended Surface Pleated Panel Filters2.8.4.2 Replaceable Media Filters2.8.4.3 Sectional Cleanable Filters2.8.5 Coil Frost Protection2.8.6 Pressure Vessels2.8.6.1 Hot Gas Muffler2.8.6.2 Liquid

10、 Receiver2.8.6.3 Oil Separator2.8.6.4 Oil Reservoir2.8.7 Internal Dampers2.8.8 Mixing BoxesSECTION 23 82 02.00 10 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.8.9 Cabinet Construction2.8.9.1 Indoor Cabinet2.8.9.2 Outdoor Cabinet2.9 ACCESSO

11、RIES2.9.1 Dry-Cooler, Glycol Solution2.9.1.1 Coil2.9.1.2 Fan Section2.9.1.3 Pump2.9.1.4 Controls2.9.2 Humidifier2.9.2.1 Steam Spray Type2.9.2.2 Steam-Diffuser Type2.9.3 Purge System2.9.4 Refrigerant Leak Detector2.9.5 Refrigerant Relief Valve/Rupture Disc Assembly2.9.6 Refrigerant Signs2.9.6.1 Insta

12、llation Identification2.9.6.2 Controls and Piping Identification2.9.7 Heat Recovery Devices2.9.7.1 Hot Air Reclaim2.9.7.2 Hot Water Reclaim2.9.8 Gaskets2.9.9 Bolts and Nuts2.9.10 Bird Screen2.10 FINISHES2.10.1 Factory Coating2.10.1.1 Coil Corrosion Protection2.10.1.2 Equipment and Components2.10.2 F

13、actory Applied Insulation2.11 SUPPLEMENTAL COMPONENTS/SERVICES2.11.1 Condenser Water Piping and Accessories2.11.2 Refrigerant Piping2.11.3 Cooling Tower2.11.4 Ductwork2.11.5 Temperature ControlsPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.2.1 Equipment3.2.2 Mechanical Room Ventilation3.2.3 Field

14、 Applied Insulation3.2.4 Field Painting3.3 CLEANING AND ADJUSTING3.4 REFRIGERANT TESTS, CHARGING, AND START-UP3.4.1 Refrigerant Leakage3.4.2 Contractors Responsibility3.5 DEMONSTRATIONS3.6 SYSTEM PERFORMANCE TESTS- End of Section Table of Contents -SECTION 23 82 02.00 10 Page 3Provided by IHSNot for

15、 ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-23 82 02.00 10 (April 2008)-Preparing Activity: USACE SupersedingUFGS-23 82 02.00 10 (January 2008)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated March

16、 2008*SECTION 23 82 02.00 10UNITARY HEATING AND COOLING EQUIPMENT04/08*NOTE: This guide specification covers the requirements for unitary (packaged and split systems) air-conditioners, heat pumps, and accessories.Edit this guide specification for project specific requirements by adding, deleting, or

17、 revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the

18、 technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is u

19、sed to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of

20、 the Sections Reference Article to automatically place the reference in the Reference Article. Also use the SECTION 23 82 02.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Reference Wizards Check Reference feature to update the issue dat

21、es.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referre

22、d to within the text by the basic designation only.AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)ARI 210/240 (2006) Performance Rating of Unitary Air-Conditioning and Air-Source Heat Pump EquipmentARI 270 (1995) Standard for Sound Rating of Outdoor Unitary EquipmentARI 310/380 (2004) Standard fo

23、r Packaged Terminal Air-Conditioners and Heat PumpsARI 320 (1998) Water-Source Heat PumpsARI 325 (1998) Ground Water-Source Heat PumpsARI 340/360 (2004) Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump EquipmentARI 350 (2000) Sound Rating of Non-Ducted Indoor Ai

24、r-Conditioning EquipmentARI 370 (2001) Sound Rating of Large Outdoor Refrigerating and Air-Conditioning EquipmentARI 410 (2001; 2002a) Standard for Forced-Circulation Air-Cooling and Air-Heating CoilsARI 460 (2005) Performance Rating of Remote Mechanical-Draft Air-Cooled Refrigerant CondensersARI 49

25、0 (2003) Remote Mechanical-Draft Evaporatively-Cooled Refrigerant CondensersARI 495 (2005) Performance Rating of Refrigerant Liquid ReceiversARI 500 (2000) Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump ApplicationsSECTION 23 8

26、2 02.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ARI 700 (2004) Specifications for Fluorocarbon RefrigerantsAMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)ASHRAE 127 (2007) Method of Testing for Rati

27、ng Computer and Data Processing Room Unitary Air-ConditionersASHRAE 15 (2007; Errata 2007) Safety Code for RefrigerationASHRAE 34 (2007; Addendas a,b,c,d,e,f,g and h; Errata 2007) Designation and Safety Classification of RefrigerantsASHRAE 52.1 (1992) Gravimetric and Dust-Spot Procedures for Testing

28、 Air-Cleaning Devices Used in General Ventilation for Removing Particulate MatterASHRAE 64 (2005) Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant CondensersAMERICAN WELDING SOCIETY (AWS)AWS Z49.1 (2005) Safety in Welding, Cutting and Allied ProcessesASME INTERNATIONAL (ASME)ASME B

29、PVC SEC IX (2007) Boiler and Pressure Vessel Code; Section IX, Welding and Brazing QualificationsASME BPVC SEC VIII D1 (2007) Boiler and Pressure Vessel Code; Section VIII, Pressure Vessels Division 1 - Basic CoverageASSOCIATION OF HOME APPLIANCE MANUFACTURERS (AHAM)AHAM RAC-1 (2005) Directory of Ce

30、rtified Room Air ConditionersASTM INTERNATIONAL (ASTM)ASTM A 123/A 123M (2002) Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsASTM A 153/A 153M (2005) Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel HardwareASTM A 307 (2007b) Standard Spec

31、ification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthSECTION 23 82 02.00 10 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM B 117 (2007) Standing Practice for Operating Salt Spray (Fog) ApparatusASTM C 1071 (2005) Standar

32、d Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)ASTM D 520 (2000; R 2005) Zinc Dust PigmentASTM E 84 (2007b) Standard Test Method for Surface Burning Characteristics of Building MaterialsASTM F 104 (2003) Standard Classification System for Nonmetallic G

33、asket MaterialsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)NEMA ICS 6 (1993; R 2006) Standard for Industrial Controls and Systems EnclosuresNEMA MG 1 (2007) Standard for Motors and GeneratorsNEMA MG 2 (2001; Rev 1 2007) Safety Standard for Construction and Guide for Selection, Installation,

34、and Use of Electric Motors and GeneratorsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 54 (2006) National Fuel Gas CodeNFPA 70 (2007) National Electrical Code - 2008 EditionNFPA 90A (2002; Errata 2003; Errata 2005) Standard for the Installation of Air Conditioning and Ventilating SystemsUNDERWRITE

35、RS LABORATORIES (UL)UL 1995 (2005) Standard for Heating and Cooling EquipmentUL 207 (2001; Rev thru Nov 2004) Standard for Refrigerant-Containing Components and Accessories, NonelectricalUL 484 (2007) Room Air ConditionersUL 586 (1996; Rev thru Aug 2004) Standard for High-Efficiency Particulate, Air

36、 Filter UnitsUL 900 (2004; Rev thru Nov 2007) Standard for Air Filter UnitsSECTION 23 82 02.00 10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.2 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL P

37、ROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked

38、 with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projec

39、ts, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other o

40、rganization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second brackete

41、d item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the su

42、bmittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsDrawingsDrawings provided in adequate detail to demonstrate compliance with contract requirements, as specified.SD-03 Product DataMaterials and EquipmentManufacturers standard

43、 catalog data, at least 5 weeks _ prior to the purchase or installation of a particular component, highlighted to show material, size, options, performance charts and curves, etc. in adequate detail to demonstrate compliance with contract requirements. Data shall include manufacturers SECTION 23 82

44、02.00 10 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-recommended installation instructions and procedures. If vibration isolation is specified for a unit, vibration isolator literature shall be included containing catalog cuts and certifica

45、tion that the isolation characteristics of the isolators provided meet the manufacturers recommendations. Data shall be submitted for each specified component.Spare PartsSpare parts data for each different item of equipment specified.Posted InstructionsPosted instructions, at least 2 _ weeks prior to construction completion, including equipment layout, wiring and control diagrams, piping, valves and control sequences, and typed condensed operation instructions. The condensed operation instructions shall include preventative maintenance procedures, methods of checking the syste