ARMY UFGS-14 21 13-2009 ELECTRIC TRACTION FREIGHT ELEVATORS《电力牵引货运电梯》.pdf

《ARMY UFGS-14 21 13-2009 ELECTRIC TRACTION FREIGHT ELEVATORS《电力牵引货运电梯》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-14 21 13-2009 ELECTRIC TRACTION FREIGHT ELEVATORS《电力牵引货运电梯》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-14 21 13 (February 2009)-Preparing Activity: USACE SupersedingUFGS-14 21 13 (July 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2009*SECTION TABLE OF CONTENTSDIVISION 14 - CONVEYING EQUIPMENTSECTION 14 21 13ELECTR

2、IC TRACTION FREIGHT ELEVATORS02/09PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Fire Protection System1.2.2 Miscellaneous Requirements1.2.3 Provisions for Earthquake Protection1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Elevator Specialist1.4.2 Elevator Inspector1.4.3 Welders Qualifications1.

3、4.4 Detail Drawings1.5 SCHEDULING1.6 WARRANTY1.7 MAINTENANCE AND REPAIR ACTION PLAN1.7.1 Maintenance and Diagnostic Tools1.7.2 Keys for Elevator Key SwitchesPART 2 PRODUCTS2.1 FREIGHT ELEVATORS2.1.1 Basic Requirements2.1.2 Cab Enclosures and Door Frame Finishes2.2 SPECIAL OPERATION AND CONTROL2.2.1

4、Firefighters Service2.2.2 Smoke Detectors2.2.3 Fire Sprinklers2.2.4 Top-of-Car Operating Device2.2.5 Hoistway Access Switches2.2.6 Independent Service2.2.7 Elevator Operation2.2.7.1 Single, Two-Stop, Automatic Operation2.2.7.2 Selective Collective Automatic Operation2.2.7.3 Duplex Selective Collecti

5、ve Automatic Operations2.2.7.4 Group Automatic OperationSECTION 14 21 13 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.2.8 Parking Switch2.3 ELEVATOR MACHINE2.4 CONTROL EQUIPMENT2.4.1 Motor Control Equipment2.4.1.1 SCR Control or VVVF AC Co

6、ntrol2.4.1.2 Motor Generator Set2.4.2 Logic Control2.4.2.1 On-Board Diagnostic Panel2.4.2.2 External Port2.4.2.3 Repair Requirements2.5 OPERATING PANELS, SIGNAL FIXTURES, AND COMMUNICATIONS CABINETS2.5.1 Capacity and Data Plates2.5.2 Car and Hall Buttons2.6 FREIGHT CAR-OPERATING PANEL2.6.1 Freight E

7、levator Controls2.6.2 Service Controls2.6.3 Certificate Window2.6.4 Semi-Selective Door Operation2.6.5 Full-Selective Door Operation2.6.6 Switches and Devices2.6.7 In-Car Position and Direction Indicator and Signal2.6.7.1 In-Car Position Indicator and Signal2.6.7.2 In-Car Direction Indicator and Sig

8、na2.6.8 Landing Position and Direction Indicator and Signal2.6.8.1 Landing Position Indicator and Signal2.6.8.2 Landing Direction Indicator and Signal2.6.9 Infra-red Curtain Unit2.7 HOISTWAY AND CAR EQUIPMENT2.7.1 Car and Counterweight Guide Rails and Fastenings2.7.2 Car and Counterweight Buffers2.7

9、.3 Pit Equipment2.7.3.1 Pit “STOP“ Switch2.7.3.2 Ladder2.7.3.3 Lighting of Pits2.7.3.4 Elevator Pit Sump Pump2.7.4 Wiring and Traveling Cables2.7.5 Emergency Signaling Devices2.8 FREIGHT ELEVATOR GUIDES, PLATFORM, AND ENCLOSURE2.8.1 Roller Guides2.8.2 Car Enclosure2.9 FREIGHT ELEVATOR HOISTWAY DOORS

10、 AND ENTRANCES2.9.1 Door Panel2.9.2 Door Operation2.10 HANDICAPPED AND MEDICAL SERVICES ACCESS2.10.1 Provision for Handicapped2.10.2 Emergency Medical Services2.11 EMERGENCY POWER OPERATION2.12 ALTERNATIVE INSTALLATIONPART 3 EXECUTION3.1 INSTALLATION3.1.1 Traveling Cables3.1.2 Structural Members3.1.

11、3 Safety Guards3.1.4 Other Requirements3.2 FIELD QUALITY CONTROL3.2.1 Testing Materials and Instruments3.2.2 Field TestsSECTION 14 21 13 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.2.2.1 Endurance Tests3.2.2.2 Speed Tests3.2.2.3 Leveling

12、Tests3.2.2.4 Insulation Resistance Tests3.2.2.5 Brake Test3.2.2.6 Temperature Rise Tests3.2.2.7 Balance Tests3.2.2.8 Motor Ampere Tests3.3 OPERATION AND MAINTENANCE TRAINING- End of Section Table of Contents -SECTION 14 21 13 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted

13、 without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-14 21 13 (February 2009)-Preparing Activity: USACE SupersedingUFGS-14 21 13 (July 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2009*SECTION 14 21 13ELECTRIC TRACTION FREIGHT ELEVATOR

14、S02/09*NOTE: This guide specification covers the requirements for electric traction freight elevators.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove inform

15、ation and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization desi

16、gnation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: Freight elevators are defined by ASME 17.1 as elevators used primarily for carrying freight and not accessible to the general public. Use Sectio

17、n 14 21 23 for ELECTRIC TRACTION PASSENGER ELEVATORS.Any editing of non-bracketed requirements in this specification must be approved through the NAVFAC Elevator Program.All Navy facility designs which include elevators must comply with (1) the “NAVFAC Elevator Design Guide“; this guide is available

18、 from the NAVFAC facilitator (www.navfacilitator.navfac.navy.mil) under Interim Technical Guidance; and (2) with UFC 3-490-06 “DESIGN: ELEVATORS“.SECTION 14 21 13 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Incorporate the following feature

19、s into the design and show in the drawings as applicable.1. Complete design of the hoistways, pits, machine rooms including all structural requirements, sizing, access, fire-resistant rating, ventilation, waterproofing and drainage.2. Proper size of openings into hoistway walls for installing hoistw

20、ay door assemblies.3. Storage facilities for elevator equipment during and after construction.4. Electrical service requirements for elevators, including sizings in compliance with codes and locations for fused and unfused disconnect switches.5. Sill supports, including steel angles, sill recesses,

21、and grouting of door sills.6. Structural steel door frames (if applicable) with extensions to beams.7. Locations for hall position indicators, hall button and key access stations, and hall lanterns.8. Emergency power supply with automatic time-delay transfer switch and auxiliary contacts with wiring

22、 to elevator controller.9. Telephone and or Intercom connections to elevator hoistway.10. Location of smoke detectors required for Firefighters Service. Also indicate wiring of the smoke detectors to the elevator control system and to the building fire alarm system.11. Wiring to elevator alarm bells

23、 and fire-fighters service.12. Lighting, ventilation and heat to machine room. Ambient temperature of 10 degrees C (50 degrees F) min., 32 degrees C (90 degrees F) max.13. Padding connectors, chair rail, or bumper guard type and location.*1.1 REFERENCES*NOTE: This paragraph is used to list the publi

24、cations cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, SECTION 14 21 13 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr

25、om IHS-,-,-and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in t

26、he text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the

27、 basic designation only.AMERICAN WELDING SOCIETY (AWS)AWS B2.1 (2005; Errata 2006; Errata 2006) Welding Procedure and Performance QualificationAWS D1.1/D1.1M (2008) Structural Welding Code - SteelASME INTERNATIONAL (ASME)ASME A17.1 (2007) Safety Code for Elevators and EscalatorsASME A17.2 (2007) Gui

28、de for Inspection of Elevators, Escalators, and Moving WalksASME A17.3 (2005) Safety Code for Existing Elevators and Escalators-Interpretations No. 6ASME QEI-1 (2007) Standard for the Qualification of Elevator InspectorsINTERNATIONAL CODE COUNCIL (ICC)ICC IBC (2006; Errata 2006; Errata 2007; Supplem

29、ent 2007; Errata 2007) International Building CodeICC PCBF (2006) International Code Council Performance Code for Buildings and FacilitiesNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)NEMA MG 1 (2007; Errata 2008) Standard for Motors and GeneratorsNEMA PREMIUM (2003) General Specification for

30、Consultants, Industrial and Municipal: NEMA Premium Efficiency Electric Motors (600 Volts or Less)SECTION 14 21 13 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 101 (2008) Life Safety Code, 2006

31、 EditionNFPA 13 (2006; Errata 2007; Amendment 1 2008) Installation of Sprinkler SystemsNFPA 252 (2007) Standard Methods of Fire Tests of Door AssembliesNFPA 70 (2007; AMD 1 2008) National Electrical Code - 2008 EditionNFPA 72 (2006) National Fire Alarm CodeU.S. NATIONAL ARCHIVES AND RECORDS ADMINIST

32、RATION (NARA)29 CFR 1910.27 Fixed Ladders36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities1.2 SYSTEM DESCRIPTIONProvide a pre-engineered elevator system, by manufacturer regularly engaged in the production of elevator systems, that complies with

33、ASME A17.1 and ASME A17.2 in their entirety, and additional requirements specified herein.1.2.1 Fire Protection System*NOTE: Hoistway vents may be activated elevator lobby smoke detectors. Detectors do not have to be placed in hoistways per IBC/NFPA 72.*Provide a fire protection system complying wit

34、h the applicable provisions of NFPA 72, NFPA 101, and ASME A17.1. Detailed specification information is stated in Section 28 31 74.00 20 INTERIOR FIRE DETECTION AND ALARM SYSTEM. Additional fire protection requirements are found in Section 28 31 02.00 20 FIRE ALARM REPORTING SYSTEMS - DIGITAL COMMUN

35、ICATORS; 21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION 21 13 13.00 20 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION; and Section 26 20 00 INTERIOR DISTRIBUTION SYSTEM.1.2.2 Miscellaneous RequirementsSubmit one set of wiring diagrams, in plastic or glass cover, framed and mounted in elevator

36、 machine room for revised building electrical system, if needed, to make supplied elevator system function as specified. Deliver other sets to Contracting Officer. Coded diagrams are not acceptable unless adequately identified. Submit calculations for the Reaction Loads imposed on the building by an

37、d Heat Loads generated by the elevator system.1.2.3 Provisions for Earthquake Protection*SECTION 14 21 13 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTE: Provide seismic protection as covered by ASME A17.1, Section 8.4. Provide fastenings

38、, attachments, and restraints for prevention of seismic damage in detail by registered structural engineer whose seal is applied to drawings or sketches. Use forces of 1.0 G horizontal and 1.0 G vertical or heavier.*The facility shall comply with all ASME A17.1, Part 8.4 requirements as applicable b

39、y location.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a

40、 submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficient

41、ly important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Manage

42、ment System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA

43、projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. informati

44、on only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the followingin accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsDetail Drawings; G; G, _SECTION 14 21 13 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Drawings, as specified.SD-03 Product DataFreight Elevators; G; G, _Accessories; G